| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| shell-quote prior to 1.8.5 finalizes parsed tokens in parse() using Array.prototype.concat as a reduce accumulator, which reallocates and copies the entire growing array on every iteration. As a result parse() runs in O(n^2) time relative to the number of input tokens. An attacker who can supply an attacker-controlled string to any code path that calls parse() (no shell metacharacters are required; plain space-separated words suffice) can block the single-threaded Node.js event loop for an extended period with a small input, resulting in a denial of service. There is no code execution or data disclosure; impact is to availability only. Fixed in 1.8.5. |
| Quest NetVault Backup NVBUDeviceDrive SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the processing of NVBUDeviceDrive JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27633. |
| Quest NetVault Backup NVBURemovableMedia SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the processing of NVBURemovableMedia JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27632. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, the upload-by-URL path did not enforce NC_ATTACHMENT_FIELD_SIZE against either the remote file's advertised Content-Length or the decoded length of a data: URI, allowing an authenticated user to bypass the configured per-file size limit. This vulnerability is fixed in 2026.04.1. |
| Quest NetVault Backup addclient3 Cross-Site Scripting Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Quest NetVault Backup. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the addclient3 webpage. The issue results from the lack of proper validation of user-supplied data, which can lead to the injection of an arbitrary script. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-27666. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, Public shared-view endpoints exposed values from columns that the view owner had hidden, via three independent paths: groupBy returned raw values for any column named in the request, filter and sort arrays operated on hidden columns enabling boolean-blind extraction, and the related-data list accepted arbitrary link-column IDs from other tables in the same base. This vulnerability is fixed in 2026.04.1. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 16.4 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with developer-role permissions to execute arbitrary client-side code in the context of another user's session, due to improper sanitization of user-supplied input. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, an authenticated commenter could store HTML in row comments that executed as script when other users hovered over the comment in the expanded form view. The comment write paths persisted the raw comment body with no server-side sanitisation; the expanded-form sidebar then rendered the stored body and fed its data-tooltip attribute to Tippy with allowHTML: true. Even when the editor stripped script tags at write time, attribute-level payloads re-entered the DOM as live HTML on hover. This vulnerability is fixed in 2026.05.1. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, revokeAllOAuthTokensByUser in the users service is an empty stub being called from passwordChange, passwordForgot, and passwordReset. OAuth access and refresh tokens were not revoked when the user changed, reset, or recovered their password, leaving an attacker-issued OAuth grant valid after the user believed they had locked the attacker out. This vulnerability is fixed in 2026.05.1. |
| Quest NetVault Backup NVBULibrarySlot SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the processing of NVBULibrarySlot JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27630. |
| A flaw was found in the foreman-mcp-server. A session management vulnerability in the MCP Server allows unauthenticated attackers to hijack active administrative sessions due to an improper cache of authenticated client connections, by trusting a non-secret session ID without re-validating authentication tokens and by logging all newly created session IDs to standard logs. This issue can result in privilege escalation and infrastructure-wide code execution. |
| Quest NetVault Backup NVBUDashboard SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the processing of NVBUDashboard JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27626. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.21 and 3.7.5, there is a high severity vulnerability in Traefik's Kubernetes Gateway provider affecting the crossProviderNamespaces allowlist. For HTTPRoute rules that declare multiple (WRR) backendRefs, Traefik evaluates the allowlist against the target backendRef.namespace instead of the route's own namespace. As a result, an HTTPRoute created in a namespace that is not allow-listed can reference a cross-provider TraefikService such as api@internal, dashboard@internal or rest@internal by pointing backendRef.namespace at an allow-listed namespace covered by a Gateway API ReferenceGrant, exposing internal Traefik services on the data plane. Exploitation requires the ability to create an accepted HTTPRoute and a matching ReferenceGrant from an allow-listed namespace; it does not require any change to Traefik static configuration, RBAC, or the deployment itself. This vulnerability is fixed in 3.6.21 and 3.7.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clean the sfp upstream if phy probing fails
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add pskb_may_pull() to skb_gro_receive_list()
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req().
syzbot reported a weird reqsk->rsk_refcnt underflow in
__inet_csk_reqsk_queue_drop().
The captured reqsk_put() in __inet_csk_reqsk_queue_drop()
is called only when it successfully removes reqsk from ehash.
Moreover, reqsk_timer_handler() calls another reqsk_put()
after that.
This indicates that the reqsk was missing both refcnts for
ehash and the timer itself.
Since all the syzbot reports had PREEMPT_RT enabled, the only
possible scenario is that reqsk_queue_hash_req() is preempted
after mod_timer() and before refcount_set(), and then the timer
triggered after 1s aborts the reqsk due to its listener's close().
Let's wrap mod_timer() and refcount_set() with
preempt_disable_nested() and preempt_enable_nested().
Note that inet_ehash_insert() holds the normal spin_lock()
(mutex in PREEMPT_RT), so it must be called outside of
preempt_disable_nested(), but this is fine.
The lookup path just ignores 0 sk_refcnt entries in ehash
and tries to create another reqsk, but this will fail at
inet_ehash_insert().
[0]:
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28
Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f
RSP: 0000:ffffc90000157948 EFLAGS: 00010246
RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00
RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005
R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568
R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0
Call Trace:
<TASK>
__refcount_sub_and_test include/linux/refcount.h:400 [inline]
__refcount_dec_and_test include/linux/refcount.h:432 [inline]
refcount_dec_and_test include/linux/refcount.h:450 [inline]
reqsk_put include/net/request_sock.h:136 [inline]
__inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007
reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137
call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403
handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0x69/0x100 kernel/softirq.c:1151
smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is
dropped:
bis = iso_pi(sk)->conn->hcon;
/* Release the socket before lookups since that requires hci_dev_lock
* which shall not be acquired while holding sock_lock for proper
* ordering.
*/
release_sock(sk);
hci_dev_lock(bis->hdev);
During the unlocked window, could a concurrent close() destroy the connection
and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory
after it is freed, fix this by using the hdev reference which was safely
acquired via iso_conn_get_hdev(). |
| Quest NetVault Backup NVBULogDaemon Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the processing of NVBULogDaemon JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-27625. |
