| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| UnixAuth lacks brute-force protection in Apache Ranger versions <= 2.8.0.
Note: UnixAuth is NOT a recommended option for production deployments.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6
fragment header and then unconditionally advances skb->mac_header:
skb->mac_header += sizeof(struct frag_hdr);
On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header
yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding
sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7),
after which skb_mac_header_was_set() wrongly reports a MAC header is
present and skb_mac_header() points into the headroom.
The reassembler has done this unconditional add since it was introduced;
it was harmless while mac_header was a bare pointer, but wrong once
mac_header became a u16 offset whose unset state is the ~0U sentinel
tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c
does the same relocation and does guard the adjustment; mirror the
guard here. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
kernel BUG at arch/x86/kvm/lapic.c:3338!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0xb40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable
mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG
or when no device is marked as master. Result bad memory access and kernel
crash[1].
Hence, skip the peer when lookup fails.
Note: In case there are peer flows, they are cleaned before LAG cleared
the master mark.
[1]
RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core]
Call Trace:
<TASK>
mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core]
mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core]
mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core]
mlx5_devcom_send_event+0x7a/0x140 [mlx5_core]
mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core]
mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core]
mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core]
mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core]
mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core]
mlx5e_detach_netdev+0x96/0xf0 [mlx5_core]
mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core]
__esw_offloads_unload_rep+0x81/0xb0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core]
mlx5e_rep_remove+0x22/0x30 [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xe8/0x1b0
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core]
mlx5_unregister_device+0x54/0x80 [mlx5_core]
mlx5_uninit_one+0x73/0x130 [mlx5_core]
remove_one+0x78/0xe0 [mlx5_core]
pci_device_remove+0x39/0xa0 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: avoid leaking the caller's thread keyring via the table device file
The refactoring in commit a28d893eb327 ("md: port block device access to file")
accidentally causes the caller's thread keyring to be kept alive long
beyond the caller's lifetime.
As a result, "cryptsetup luksSuspend" silently fails to wipe the
LUKS volume key from memory.
In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread
keyring to pass the volume key to the kernel. dm-crypt's
crypt_set_keyring_key() copies the key material into its own
crypt_config structure and then drops its own reference to the key in
the keyring with key_put().
With this fix, restoring pre-v6.9 behavior, the copy in the thread
keyring is then promptly garbage collected, such that exactly one copy
of the volume key remains. This single copy is correctly wiped from
memory on "cryptsetup luksSuspend".
Without this fix, the thread keyring and the volume key in it remains.
This second copy is only freed on "luksClose". "luksSuspend" neither
knows about this copy nor has any way to remove it, so the key remains
recoverable from RAM after a suspend that is documented to have wiped it.
This fix should not introduce new security problems, as the code is
anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling
task, is the legitimate owner of this long-lived file. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing NULL pointer check in afs_break_some_callbacks()
Fix afs_break_some_callbacks() to check to see if afs_lookup_volume_rcu()
returned NULL (e.g. the specified volume is unknown). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ge_put_enum_double() passes the user-supplied enumeration index
item[0] to snd_soc_enum_item_to_val() without checking it against the
number of items in the enum:
ret = snd_soc_enum_item_to_val(e, item[0]);
snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array
with that index (e->values is set from a devm_kcalloc() of e->items
entries), so a control write with an out-of-range item[0] reads past the
end of the values buffer. The bounds check in
snd_soc_dapm_put_enum_double() only runs afterwards, so it does not
prevent the read here.
Reject an out-of-range item before using it, matching the other enum put
handlers.
This issue was pointed out by the Sashiko AI review bot while reviewing a
related enum-validation series:
https://lore.kernel.org/all/20260609125735.CEB651F00893@smtp.kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer spill metadata during half-slot cleanup
__clean_func_state() cleans dead stack slots in 4-byte halves. When the
high half of a STACK_SPILL slot is dead and the low half remains live,
cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears
the saved spilled_ptr metadata.
That conversion is safe only for scalar spills. For a pointer spill, this
metadata clear lets a later 32-bit fill from the still-live half avoid the
normal non-scalar register-fill check and be treated as an ordinary scalar
stack read.
Leave non-scalar spill slots intact in this half-live shape. This is
conservative for pruning and preserves the existing
check_stack_read_fixed_off() rejection path for partial fills from pointer
spills. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing rcu list annotations and operations
sashiko-bot remarked the missing use of list_add_rcu() in
bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure
when bcm_proc_show() traverses the bcm_op's under rcu_read_lock().
To cover all initial settings of the bcm_op's the list_add_rcu() calls
are moved to the end of the setup code.
While at it, also fix the mirroring removal side: bcm_release() called
bcm_remove_op() - which frees the op via call_rcu() - on ops that were
still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first.
Unlink each op with list_del_rcu() before handing it to bcm_remove_op(),
matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to arbitrary code execution on Windows when installed for all users due to publicly writeable directory. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-tesla tesla allows a denial of service via decompression bomb in HTTP response bodies.
When Tesla.Middleware.DecompressResponse or Tesla.Middleware.Compression is included in a Tesla middleware pipeline, HTTP response bodies are decompressed eagerly with no size limit. The decompress_body/2 function in lib/tesla/middleware/compression.ex passes the entire response body to :zlib.gunzip/1 or :zlib.unzip/1 without any cap on the output size. Additionally, compression_algorithms/1 splits the content-encoding header on commas and decompress_body/2 recurses once per token, applying a decompression pass on each iteration. A server advertising content-encoding: gzip, gzip, gzip, gzip causes four recursive decompression passes, yielding exponential amplification: each gzip layer can expand its input roughly 1000x, so a payload of a few hundred bytes on the wire inflates to gigabytes of BEAM heap, exhausting memory and crashing or freezing the calling process.
This issue affects tesla: from 0.6.0 before 1.18.3. |
| Insertion of Sensitive Information into Log File (CWE-532) in some Command Centre Service installers could lead to Service Account credentials exposure.
Mitigating Factor: Only sites that install Command Centre Services with a custom Service Account (not the default Network Service account) are potentially impacted.
Mitigation: For sites concerned about exposure, the recommended action is to change the Service Account password. They can also delete any installer log files, usually found in %programdata%\Gallagher\Command Centre. |
| Scriban before 7.0.0 fails to clear the CachedTemplates dictionary when TemplateContext.Reset() is called, allowing cached templates to persist across reused contexts. Attackers can exploit request-dependent ITemplateLoader implementations to access previously authorized template content from earlier renders without triggering TemplateLoader.Load() again. |
| OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.4, 1.1.4, and 1.2.0-rc.2, OpenChoreo Workflow Plane templates under samples/getting-started/workflow-templates/ interpolated developer-controlled workflow parameters into shell program text executed through sh -c instead of passing the values through container.env, allowing arbitrary commands to run in workflow pods while affected privileged Podman templates lacked hostUsers: false. This issue is fixed in versions 1.0.4, 1.1.4, and 1.2.0-rc.2. |
| SiYuan versions before v3.7.4 contain an authentication bypass vulnerability in the WebSocket endpoint caused by differential parsing of query parameters between authentication exemption and session quarantine checks. Unauthenticated attackers can craft a malicious WebSocket URI with duplicated query parameters to bypass access auth code validation and receive the live kernel event stream including document identifiers, titles, and operation logs. |
| A vulnerability was identified in LB-LINK X-PRO 1.0.22-20231206. The impacted element is an unknown function of the file /etc/shadow. The manipulation leads to hard-coded credentials. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is regarded as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1064 via the Form Builder widget's 'webhook_url' setting. The widget's render() method persists the attacker-controlled URL into the wpr_webhook_url_{widget_id} option on every render (including a Contributor previewing their own draft), and the wpr_form_builder_webhook AJAX handler — registered for both authenticated and unauthenticated callers — reads that option and dispatches the outbound request via the non-safe wp_remote_post(), with no host allowlist, no scheme restriction, and no private/loopback IP filter (the plugin's existing wpr_is_blocked_remote_host / wpr_is_private_or_local_ip helpers are not called on this path). This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
