| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Yadea T5 Electric Bicycles (models manufactured in/after 2024) have a weak authentication mechanism in their keyless entry system. The system utilizes the EV1527 fixed-code RF protocol without implementing rolling codes or cryptographic challenge-response mechanisms. This is vulnerable to signal forgery after a local attacker intercepts any legitimate key fob transmission, allowing for complete unauthorized vehicle operation via a replay attack. |
| radare2 prior to 6.1.4 contains a path traversal vulnerability in project deletion that allows local attackers to recursively delete arbitrary directories by supplying absolute paths that escape the configured dir.projects root directory. Attackers can craft absolute paths to project marker files outside the project storage boundary to cause recursive deletion of attacker-chosen directories with permissions of the radare2 process, resulting in integrity and availability loss. |
| Froxlor is open source server administration software. Prior to version 2.3.6, `DataDump.add()` constructs the export destination path from user-supplied input without passing the `$fixed_homedir` parameter to `FileDir::makeCorrectDir()`, bypassing the symlink validation that was added to all other customer-facing path operations (likely as the fix for CVE-2023-6069). When the ExportCron runs as root, it executes `chown -R` on the resolved symlink target, allowing a customer to take ownership of arbitrary directories on the system. Version 2.3.6 contains an updated fix. |
| Paperclip is a Node.js server and React UI that orchestrates a team of AI agents to run a business. Prior to version 2026.416.0, an unauthenticated attacker can achieve full remote code execution on any network-accessible Paperclip instance running in `authenticated` mode with default configuration. No user interaction, no credentials, just the target's address. The chain consists of six API calls. The attack is fully automated, requires no user interaction, and works against the default deployment configuration. Version 2026.416.0 patches the issue. |
| uuid before 14.0.0 can make unexpected writes when external output buffers are used, and the UUID version is 3, 5, or 6. In particular, UUID version 4, which is very commonly used, is unaffected by this issue. |
| A path traversal condition in Intrado 911 Emergency Gateway could allow an attacker with existing network access the ability to access the EGW management interface without authentication. Successful exploitation of this vulnerability could allow a user to read, modify, or delete files. |
| OpenTelemetry dotnet is a dotnet telemetry framework. In 1.6.0-rc.1 and earlier, OpenTelemetry.Exporter.Jaeger may allow sustained memory pressure when the internal pooled-list sizing grows based on a large observed span/tag set and that enlarged size is reused for subsequent allocations. Under high-cardinality or attacker-influenced telemetry input, this can increase memory consumption and potentially cause denial of service. There is no plan to fix this issue as OpenTelemetry.Exporter.Jaeger was deprecated in 2023. |
| Press, a Frappe custom app that runs Frappe Cloud, manages infrastructure, subscription, marketplace, and software-as-a-service (SaaS).`press.api.account.create_api_secret` is prone to CSRF-like exploits. This endpoint writes to database and it is also accessible via GET method. The patch in commit 52ea2f2d1b587be0807557e96f025f47897d00fd restricts method to POST. |
| Multiple uses of uninitialized variables were found in libopensc that may lead to information disclosure or application crash. An attack requires a crafted USB device or smart card that would present the system with specially crafted responses to the APDUs |
| Pipecat is an open-source Python framework for building real-time voice and multimodal conversational agents. Versions 0.0.41 through 0.0.93 have a vulnerability in `LivekitFrameSerializer` – an optional, non-default, undocumented frame serializer class (now deprecated) intended for LiveKit integration. The class's `deserialize()` method uses Python's `pickle.loads()` on data received from WebSocket clients without any validation or sanitization. This means that a malicious WebSocket client can send a crafted pickle payload to execute arbitrary code on the Pipecat server. The vulnerable code resides in `src/pipecat/serializers/livekit.py` (around line 73), where untrusted WebSocket message data is passed directly into `pickle.loads()` for deserialization. If a Pipecat server is configured to use LivekitFrameSerializer and is listening on an external interface (e.g. 0.0.0.0), an attacker on the network (or the internet, if the service is exposed) could achieve remote code execution (RCE) on the server by sending a malicious pickle payload. Version 0.0.94 contains a fix. Users of Pipecat should avoid or replace unsafe deserialization and improve network security configuration. The best mitigation is to stop using the vulnerable LivekitFrameSerializer altogether. Those who require LiveKit functionality should upgrade to the latest Pipecat version and switch to the recommended `LiveKitTransport` or another secure method provided by the framework. Additionally, always follow secure coding practices: never trust client-supplied data, and avoid Python pickle (or similar unsafe deserialization) in network-facing components. |
| An API design flaw in WebKitGTK and WPE WebKit allows untrusted web content to unexpectedly perform IP connections, DNS lookups, and HTTP requests. Applications expect to use the
WebPage::send-request signal handler to approve or reject all network requests. However, certain types of HTTP requests bypass this signal handler. |
| IBM Guardium Data Protection 12.0, 12.1, and 12.2 is vulnerable to a Bypass Business Logic vulnerability in the access management control panel. |
| KTransformers through 0.5.3 contains an unsafe deserialization vulnerability in the balance_serve backend mode where the scheduler RPC server binds a ZMQ ROUTER socket to all interfaces with no authentication and deserializes incoming messages using pickle.loads() without validation. Attackers can send a crafted pickle payload to the exposed ZMQ socket to execute arbitrary code on the server with the privileges of the ktransformers process. |
| melange allows users to build apk packages using declarative pipelines. Starting in version 0.32.0 and prior to version 0.43.4, `melange lint --persist-lint-results` (opt-in flag, also usable via `melange build --persist-lint-results`) constructs output file paths by joining `--out-dir` with the `arch` and `pkgname` values read from the `.PKGINFO` control file of the APK being linted. In affected versions these values were not validated for path separators or `..` sequences, so an attacker who can supply an APK to a melange-based lint/build pipeline (e.g. CI that lints third-party APKs, or build-as-a-service) could cause melange to write `lint-<pkgname>-<pkgver>-r<epoch>.json` to an arbitrary `.json` path reachable by the melange process. The written file is a JSON lint report whose content is partially attacker-influenced. There is no direct code-execution path, but the write can clobber other JSON artifacts on the filesystem. The issue only affects deployments that explicitly pass `--persist-lint-results`; the flag is off by default. The issue is fixed in melange v0.43.4 by validating `arch` and `pkgname` for `..`, `/`, and `filepath.Separator` before path construction in `pkg/linter/results.go` (commit 84f3b45). As a workaround, do not pass `--persist-lint-results` when linting or building APKs whose `.PKGINFO` contents are not fully trusted. Running melange as a low-privileged user and confining writes to an isolated directory also limits impact. |
| Xibo is an open source digital signage platform with a web content management system and Windows display player software. Prior to version 4.4.1, any authenticated user can manually construct a URL to preview campaigns/regions, and export saved reports belonging to other users. Exploitation of the vulnerability is possible on behalf of an authorized user who has any of the following privileges: Page which shows all Layouts that have been created for the purposes of Layout Management; page which shows all Campaigns that have been created for the purposes of Campaign Management; and page which shows all Reports that have been Saved. Users should upgrade to version 4.4.1 which fixes this issue. Upgrading to a fixed version is necessary to remediate. |
| The installers of LiveOn Meet Client for Windows (Downloader5Installer.exe and Downloader5InstallerForAdmin.exe) and the installers of Canon Network Camera Plugin (CanonNWCamPlugin.exe and CanonNWCamPluginForAdmin.exe) insecurely load Dynamic Link Libraries (DLLs). If a malicious DLL is placed at the same directory, the affected installer may load that DLL and execute its code with the privilege of the user invoking the installer. |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 8.2.6.4 have a SQL injection vulnerability in the haproxy_section_save function in app/routes/config/routes.py. The server_ip parameter, sourced from the URL path, is passed unsanitized through multiple function calls and ultimately interpolated into a SQL query string using Python string formatting, allowing attackers to execute arbitrary SQL commands. Version 8.2.6.4 fixes the issue. |
| IP Setting Software contains an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with administrative privileges. |
| An unauthenticated remote attacker is able to exhaust all available TCP connections in the CODESYS EtherNet/IP adapter stack, preventing legitimate clients from establishing new connections. |
| A critical remote code execution vulnerability exists in the unauthenticated REST API endpoint /99/ImportSQLTable in H2O-3 version 3.46.0.9 and prior. The vulnerability arises due to insufficient security controls in the parameter blacklist mechanism, which only targets MySQL JDBC driver-specific dangerous parameters. An attacker can bypass these controls by switching the JDBC URL protocol to jdbc:postgresql: and exploiting PostgreSQL JDBC driver-specific parameters such as socketFactory and socketFactoryArg. This allows unauthenticated attackers to execute arbitrary code on the H2O-3 server with the privileges of the H2O-3 process. The issue is resolved in version 3.46.0.10. |
