| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - snapshot IV for async AEAD requests
AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during
request processing. For async requests, later socket activity can
update that shared state before the original request has fully
completed, which can lead to inconsistent IV handling.
Snapshot the IV into per-request storage when preparing the AEAD
request, so in-flight operations no longer depend on mutable socket
state. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Return proper address for non-zero offsets in insn array
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Limit bpf program signature size
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR hang in LAG error state unload
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memfd_luo: fix physical address conversion in put_folios cleanup
In memfd_luo_retrieve_folios()'s put_folios cleanup path:
1. kho_restore_folio() expects a phys_addr_t (physical address) but
receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to
check the wrong physical address (pfn << PAGE_SHIFT instead of the
actual physical address).
2. This loop lacks the !pfolio->pfn check that exists in the main
retrieval loop and memfd_luo_discard_folios(), which could
incorrectly process sparse file holes where pfn=0.
Fix by converting PFN to physical address with PFN_PHYS() and adding
the !pfolio->pfn check, matching the pattern used elsewhere in this file.
This issue was identified by the AI review.
https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp
Users can set damos_quota_goal->nid with arbitrary value for
node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA()
without a validation of the value. This can result in out of bounds
memory access. The issue can actually triggered using DAMON user-space
tool (damo), like below.
$ sudo mkdir /sys/fs/cgroup/foo
$ sudo ./damo start --damos_action stat --damos_quota_interval 1s \
--damos_quota_goal node_memcg_used_bp 50% -1 /foo
$ sudo dmseg
[...]
[ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00
Fix this issue by adding the validation of the given node id. If an
invalid node id is given, it returns 0% for used memory ratio, and 100%
for free memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix resource leaks on device setup failure
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup(). |
| Missing Authorization vulnerability in Benbodhi SVG Support allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects SVG Support: from n/a through 2.5.14. |
| Missing Authorization vulnerability in Prasad Kirpekar WP Meta and Date Remover allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects WP Meta and Date Remover: from n/a through 2.3.6. |
| go-git is an extensible git implementation library written in pure Go. Prior to 5.19.0 and 6.0.0-alpha.3, go-git may parse malformed Git objects in a way that differs from upstream Git. When commit or tag objects contain ambiguous or malformed headers, go-git’s decoded representation may expose values differently from how Git itself would interpret or reject the same object. Additionally, go-git’s commit signing and verification logic operates over commit data reconstructed from go-git’s parsed representation rather than the original raw object bytes. As a result, go-git may sign or verify a commit payload that is not byte-for-byte equivalent to the object stored in the repository. This can cause a signature to appear valid for a commit whose displayed or effective metadata differs from the object that was intended to be signed. This vulnerability is fixed in 5.19.0 and 6.0.0-alpha.3. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork()
hook_cred_transfer() only copies the Landlock security blob when the
source credential has a domain. This is inconsistent with
landlock_restrict_self() which can set LOG_SUBDOMAINS_OFF on a
credential without creating a domain (via the ruleset_fd=-1 path): the
field is committed but not preserved across fork() because the child's
prepare_creds() calls hook_cred_transfer() which skips the copy when
domain is NULL.
This breaks the documented use case where a process mutes subdomain logs
before forking sandboxed children: the children lose the muting and
their domains produce unexpected audit records.
Fix this by unconditionally copying the Landlock credential blob. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix IRQ cleanup on 6xxx probe failure
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors. |
