| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kofax Capture, now referred to as Tungsten Capture, version 6.0.0.0 (other versions may be affected) exposes a deprecated .NET Remoting HTTP channel on port 2424 via the Ascent Capture Service that is accessible without authentication and uses a default, publicly known endpoint identifier. An unauthenticated remote attacker can exploit .NET Remoting object unmarshalling techniques to instantiate a remote System.Net.WebClient object and read arbitrary files from the server filesystem, write attacker-controlled files to the server, or coerce NTLMv2 authentication to an attacker-controlled host, enabling sensitive credential disclosure, denial of service, remote code execution, or lateral movement depending on service account privileges and network environment. |
| KTransformers through 0.5.3 contains an unsafe deserialization vulnerability in the balance_serve backend mode where the scheduler RPC server binds a ZMQ ROUTER socket to all interfaces with no authentication and deserializes incoming messages using pickle.loads() without validation. Attackers can send a crafted pickle payload to the exposed ZMQ socket to execute arbitrary code on the server with the privileges of the ktransformers process. |
| SWUpdate contains an integer underflow vulnerability in the multipart upload parser in mongoose_multipart.c that allows unauthenticated attackers to cause a denial of service by sending a crafted HTTP POST request to /upload with a malformed multipart boundary and controlled TCP stream timing. Attackers can trigger an integer underflow in the mg_http_multipart_continue_wait_for_chunk() function when the buffer length falls within a specific range, causing an out-of-bounds heap read that writes data beyond the allocated receive buffer to a local IPC socket. |
| melange allows users to build apk packages using declarative pipelines. Starting in version 0.32.0 and prior to version 0.43.4, an attacker who can influence a melange configuration file — for example through pull-request-driven CI or build-as-a-service scenarios — could set `pipeline[].uses` to a value containing `../` sequences or an absolute path. The `(*Compiled).compilePipeline` function in `pkg/build/compile.go` passed `uses` directly to `filepath.Join(pipelineDir, uses + ".yaml")` without validating the value, so the resolved path could escape each `--pipeline-dir` and read an arbitrary YAML-parseable file visible to the melange process. Because the loaded file is subsequently interpreted as a melange pipeline and its `runs:` block is executed via `/bin/sh -c` in the build sandbox, this additionally allowed shell commands sourced from an out-of-tree file to run during the build, bypassing the review boundary that normally covers the in-tree pipeline definition. The issue is fixed in melange v0.43.4 via commit 5829ca4. The fix rejects `uses` values that are absolute paths or contain `..`, and verifies (via `filepath.Rel` after `filepath.Clean`) that the resolved target remains within the pipeline directory. As a workaround, only run `melange build` against configuration files from trusted sources. In CI systems that build user-supplied melange configs, gate builds behind manual review of `pipeline[].uses` values and reject any containing `..` or leading `/`. |
| melange allows users to build apk packages using declarative pipelines. Starting in version 0.32.0 and prior to version 0.43.4, `melange lint --persist-lint-results` (opt-in flag, also usable via `melange build --persist-lint-results`) constructs output file paths by joining `--out-dir` with the `arch` and `pkgname` values read from the `.PKGINFO` control file of the APK being linted. In affected versions these values were not validated for path separators or `..` sequences, so an attacker who can supply an APK to a melange-based lint/build pipeline (e.g. CI that lints third-party APKs, or build-as-a-service) could cause melange to write `lint-<pkgname>-<pkgver>-r<epoch>.json` to an arbitrary `.json` path reachable by the melange process. The written file is a JSON lint report whose content is partially attacker-influenced. There is no direct code-execution path, but the write can clobber other JSON artifacts on the filesystem. The issue only affects deployments that explicitly pass `--persist-lint-results`; the flag is off by default. The issue is fixed in melange v0.43.4 by validating `arch` and `pkgname` for `..`, `/`, and `filepath.Separator` before path construction in `pkg/linter/results.go` (commit 84f3b45). As a workaround, do not pass `--persist-lint-results` when linting or building APKs whose `.PKGINFO` contents are not fully trusted. Running melange as a low-privileged user and confining writes to an isolated directory also limits impact. |
| Xibo is an open source digital signage platform with a web content management system and Windows display player software. An authenticated Server-Side Request Forgery (SSRF) vulnerability in versions prior to 4.4.1 allows users with DataSet permissions to make arbitrary HTTP requests from the CMS server to internal or external network resources. This can be exploited to scan internal infrastructure, access local cloud metadata endpoints (e.g., AWS IMDS), interact with internal services that lack authentication, or exfiltrate data. Exploitation of the vulnerability is possible on behalf of an authorized user who has both of the following privileges, which are not granted to non-admins as standard: Include "Add DataSet" button to allow for additional DataSets to be created independently to Layouts. Users should upgrade to version 4.4.1 which fixes this issue. Upgrading to a fixed version is necessary to remediate. Users unable to upgrade should revoke such privileges from users they do not trust. |
| Xibo is an open source digital signage platform with a web content management system and Windows display player software. Prior to version 4.4.1, any authenticated user can manually construct a URL to preview campaigns/regions, and export saved reports belonging to other users. Exploitation of the vulnerability is possible on behalf of an authorized user who has any of the following privileges: Page which shows all Layouts that have been created for the purposes of Layout Management; page which shows all Campaigns that have been created for the purposes of Campaign Management; and page which shows all Reports that have been Saved. Users should upgrade to version 4.4.1 which fixes this issue. Upgrading to a fixed version is necessary to remediate. |
| The installers of LiveOn Meet Client for Windows (Downloader5Installer.exe and Downloader5InstallerForAdmin.exe) and the installers of Canon Network Camera Plugin (CanonNWCamPlugin.exe and CanonNWCamPluginForAdmin.exe) insecurely load Dynamic Link Libraries (DLLs). If a malicious DLL is placed at the same directory, the affected installer may load that DLL and execute its code with the privilege of the user invoking the installer. |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 8.2.6.4 have a SQL injection vulnerability in the haproxy_section_save function in app/routes/config/routes.py. The server_ip parameter, sourced from the URL path, is passed unsanitized through multiple function calls and ultimately interpolated into a SQL query string using Python string formatting, allowing attackers to execute arbitrary SQL commands. Version 8.2.6.4 fixes the issue. |
| Actual is a local-first personal finance tool. Prior to version 26.4.0, any authenticated user (including `BASIC` role) can escalate to `ADMIN` on servers migrated from password authentication to OpenID Connect. Three weaknesses combine: `POST /account/change-password` has no authorization check, allowing any session to overwrite the password hash; the inactive password `auth` row is never removed on migration; and the login endpoint accepts a client-supplied `loginMethod` that bypasses the server's active auth configuration. Together these allow an attacker to set a known password and authenticate as the anonymous admin account created during the multiuser migration. The three weaknesses form a single, sequential exploit chain — none produces privilege escalation on its own. Missing authorization on POST /change-password allows overwriting a password hash, but only matters if there is an orphaned row to target. Orphaned password row persisting after migration provides the target row, but is harmless without the ability to authenticate using it. Client-controlled loginMethod: "password" allows forcing password-based auth, but is useless without a known hash established by step 1. All three must be chained in sequence to achieve the impact. No single weakness independently results in privilege escalation. The single root cause is the missing authorization check on /change-password; the other two are preconditions that make it exploitable. Version 26.4.0 contains a fix. |
| IP Setting Software contains an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with administrative privileges. |
| An unauthenticated remote attacker is able to exhaust all available TCP connections in the CODESYS EtherNet/IP adapter stack, preventing legitimate clients from establishing new connections. |
| A critical remote code execution vulnerability exists in the unauthenticated REST API endpoint /99/ImportSQLTable in H2O-3 version 3.46.0.9 and prior. The vulnerability arises due to insufficient security controls in the parameter blacklist mechanism, which only targets MySQL JDBC driver-specific dangerous parameters. An attacker can bypass these controls by switching the JDBC URL protocol to jdbc:postgresql: and exploiting PostgreSQL JDBC driver-specific parameters such as socketFactory and socketFactoryArg. This allows unauthenticated attackers to execute arbitrary code on the H2O-3 server with the privileges of the H2O-3 process. The issue is resolved in version 3.46.0.10. |
| A path Traversal vulnerability exists in Ziostation2 v2.9.8.7 and earlier. A remote unauthenticated attacker may get sensitive information on the operating system. |
| Kirby is an open-source content management system. Kirby's user permissions control which user role is allowed to perform specific actions to content models in the CMS. These permissions are defined for each role in the user blueprint (`site/blueprints/users/...`). It is also possible to customize the permissions for each target model in the model blueprints (such as in `site/blueprints/pages/...`) using the `options` feature. The permissions and options together control the authorization of user actions. For pages, Kirby provides the `pages.create` and `pages.changeStatus` permissions (among others). Prior to versions 4.9.0 and 5.4.0, Kirby checked these permissions independently and only for the respective action. However the `changeStatus` permission didn't take effect on page creation. New pages are created as drafts by default and need to be published by changing the page status of an existing page draft. This is ensured when the page is created via the Kirby Panel. However the REST API allows to override the `isDraft` flag when creating a new page. This allowed authenticated attackers with the `pages.create` permission to immediately create published pages, bypassing the normal editorial workflow. The problem has been patched in Kirby 4.9.0 and Kirby 5.4.0. Kirby has added a check to the page creation rules that ensures that users without the `pages.changeStatus` permission cannot create published pages, only page drafts. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Versions prior to 3.25.0 have an off-by-one in the path traversal filter in `channels/drive/client/drive_file.c`. The `contains_dotdot()` function catches `../` and `..\` mid-path but misses `..` when it's the last component with no trailing separator. A rogue RDP server can read, list, or write files one directory above the client's shared folder through RDPDR requests. This requires the victim to connect with drive redirection enabled. Version 3.25.0 patches the issue. |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14. |
| OpenTelemetry dotnet is a dotnet telemetry framework. In OpenTelemetry.Api 0.5.0-beta.2 to 1.15.2 and OpenTelemetry.Extensions.Propagators 1.3.1 to 1.15.2, The implementation details of the baggage, B3 and Jaeger processing code in the OpenTelemetry.Api and OpenTelemetry.Extensions.Propagators NuGet packages can allocate excessive memory when parsing which could create a potential denial of service (DoS) in the consuming application. This vulnerability is fixed in 1.15.3. |
| The AWS X-Ray Remote Sampler package provides a sampler which can get sampling configurations from AWS X-Ray. Prior to 0.1.0-alpha.8, OpenTelemetry.Sampler.AWS reads unbounded HTTP response bodies from a configured AWS X-Ray remote sampling endpoint into memory. AWSXRaySamplerClient.DoRequestAsync called HttpClient.SendAsync followed by ReadAsStringAsync(), which materializes the entire HTTP response body into a single in-memory string with no size limit. The sampling endpoint is configurable via AWSXRayRemoteSamplerBuilder.SetEndpoint (default: http://localhost:2000). An attacker who controls the configured endpoint, or who can intercept traffic to it (MitM), can return an arbitrarily large response body. This causes unbounded heap allocation in the consuming process, leading to high transient memory pressure, garbage-collection stalls, or an OutOfMemoryException that terminates the process. This vulnerability is fixed in 0.1.0-alpha.8. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to versions 5.73.20 and 6.13.0, manipulating query parameters on Control Panel and REST API endpoints, or arguments in GraphQL queries, could result in the loss of content, assets, and user accounts. The Control Panel requires authentication with minimal permissions in order to exploit. e.g. "view entries" permission to delete entries, or "view users" permission to delete users, etc. The REST and GraphQL API exploits do not require any permissions, however neither are enabled by default. In order to be exploited, they would need to be explicitly enabled with no authentication configured, and the specific resources enabled too. Sites that enable the REST or GraphQL API without authentication should treat patching as critical priority. This has been fixed in 5.73.20 and 6.13.0. |
