| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Anviz CX2 Lite and CX7 are vulnerable to unauthenticated POST requests that modify debug
settings (e.g., enabling SSH), allowing unauthorized state changes that
can facilitate later compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix pass-by-value structs causing MSAN warnings
vidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take their
argument structs by value, causing MSAN to report uninit-value warnings.
While only vidtv_ts_null_write_into() has triggered a report so far,
both functions share the same issue.
Fix by passing both structs by const pointer instead, avoiding the
stack copy of the struct along with its MSAN shadow and origin metadata.
The functions do not modify the structs, which is enforced by the const
qualifier. |
| Always-Incorrect Control Flow Implementation vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-ENET/IP Ethernet Module FX5-ENET/IP versions 1.106 and prior and Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-EIP EtherNet/IP Module FX5-EIP versions 1.000 and prior allows a remote attacker to cause a denial-of-service (DoS) condition on the products by continuously sending UDP packets to the products. A system reset of the product is required for recovery. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.2.2, a malicious or compromised validator that is elected as proposer can publish a macro block proposal where `header.body_root` does not match the actual macro body hash. The proposal can pass proposal verification because the macro proposal verification path validates the header but does not validate the binding `body_root == hash(body)`; later code expects this binding and may panic on mismatch, crashing validators. Note that the impact is only for validator nodes. The patch for this vulnerability is formally released as part of v1.2.2. The patch adds the corresponding body root verification in the proposal checks. No known workarounds are available. |
| A vulnerability was determined in NASA cFS up to 7.0.0. This impacts the function CFE_SB_TransmitMsg of the file cfe_sb_priv.c of the component CCSDS Header Size Handler. Executing a manipulation can lead to memory corruption. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in NASA cFS up to 7.0.0 on 32-bit. Affected is the function CFE_TBL_ValidateCodecLoadSize of the file cfe/modules/tbl/fsw/src/cfe_tbl_passthru_codec.c. The manipulation leads to integer overflow. The complexity of an attack is rather high. The exploitability is told to be difficult. A fix is planned for the upcoming version milestone of the project. |
| A security vulnerability has been detected in libssh2 up to 1.11.1. The impacted element is the function userauth_password of the file src/userauth.c. Such manipulation of the argument username_len/password_len leads to integer overflow. The attack may be launched remotely. The name of the patch is 256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to remediate this issue. |
| A security vulnerability has been detected in AstrBotDevs AstrBot up to 4.16.0. This issue affects some unknown processing of the file astrbot/dashboard/routes/auth.py of the component Dashboard. The manipulation leads to hard-coded credentials. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SSCMS v7.4.0 contains a SQL injection vulnerability in the stl:sqlContent tag where the queryString attribute is passed directly to database execution without parameterization or sanitization. Attackers can craft encrypted payloads submitted to the /api/stl/actions/dynamic endpoint to execute arbitrary SQL statements, leading to unauthorized database access, data disclosure, authentication bypass, data modification, or complete database compromise. |
| During the analysis, it was identified that authenticated attackers with Subscriber-level access or higher are able to perform an Insecure Direct Object Reference (IDOR) attack. This vulnerability exists because the Frontend File Manager Plugin WordPress plugin through 23.6 does not properly validate user authorization for the requested uploaded file when processing download requests. By modifying the value of the 'file_id' parameter in the download endpoint (e.g., http://localhost/?do=wpfm_download&file_id=40&nm_file_nonce=a36fb893f1), an attacker can access files belonging to other users, including privileged users such as administrators. This allows unauthorized access/read to sensitive data stored within the application. |
| In Argo CD 3.2.0 before 3.2.11 and 3.3.0 before 3.3.9, ServerSideDiff allows reading cleartext Kubernetes Secret data. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a potential vulnerability in Traefik's Kubernetes CRD provider cross-namespace isolation enforcement. When providers.kubernetesCRD.allowCrossNamespace=false, Traefik correctly rejects direct cross-namespace middleware references from IngressRoute objects, but fails to apply the same restriction to middleware references nested inside a Chain middleware's spec.chain.middlewares[]. An actor with permission to create or update Traefik CRDs in their own namespace can exploit this to cause Traefik to resolve and apply middleware objects from another namespace, bypassing the documented isolation boundary. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| A maliciously crafted 3DM file, when linked or imported into certain Autodesk products, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A container privilege escalation flaw was found in certain Red Hat Process Automation Manager images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A container privilege escalation flaw was found in certain OpenShift Update Service (OSUS) images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| Insufficient packet validation in FreeRTOS-Plus-TCP before V4.2.6 and V4.4.1 allows an adjacent network actor to bypass all checksum and minimum-size validation by spoofing the Ethernet source MAC address to match one of the device's own registered endpoints, because the loopback detection mechanism skips all input validation for packets whose source MAC matches a local endpoint.
To mitigate this issue, users should upgrade to the fixed version when available. |
| The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1057. This is due to insufficient validation of user-supplied URLs in the render_csv_data() function, which can be bypassed by including 'docs.google.com/spreadsheets' in a query parameter, and the subsequent use of these URLs in fopen() calls without blocking internal or private network addresses. This makes it possible for authenticated attackers, with Contributor-level access and above, to make requests to arbitrary URLs and retrieve sensitive information from internal services. |
| The Gravity Forms plugin for WordPress is vulnerable to Unauthenticated Stored Cross-Site Scripting in versions up to and including 2.10.0. This is due to insufficient input validation and output escaping in the SingleProduct field when used inside a Repeater field. When SingleProduct fields are nested within Repeater fields, the validation flow bypasses the state validation mechanism (failed_state_validation()) that would normally prevent tampering with field values. The validate_subfield() method only calls the field's validate() method, which for SingleProduct fields only validates the quantity field and does not check the product name field for tampering. As a result, an attacker can inject arbitrary HTML and JavaScript into the product name field (input .1). This malicious input is then saved to the database without sanitization because sanitize_entry_value() returns raw values when HTML is not expected for the field type. When an administrator views the entry in wp-admin/admin.php?page=gf_entries, the get_value_entry_detail() method outputs the product name without escaping, causing the stored XSS payload to execute in the administrator's browser. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever an administrator accesses an entry containing the malicious payload. |
| Improper
access control in the vault documentation feature in Devolutions
Server allows an authenticated attacker to read documentation content
from unauthorized vaults via a crafted API request.
This issue affects Server: from 2026.1.6.0 through 2026.1.14.0, through 2025.3.18.0. |
