| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Patchwork: https://patchwork.freedesktop.org/patch/693860/ |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/kexec: fix IMA when allocation happens in CMA area
*** Bug description ***
When I tested kexec with the latest kernel, I ran into the following warning:
[ 40.712410] ------------[ cut here ]------------
[ 40.712576] WARNING: CPU: 2 PID: 1562 at kernel/kexec_core.c:1001 kimage_map_segment+0x144/0x198
[...]
[ 40.816047] Call trace:
[ 40.818498] kimage_map_segment+0x144/0x198 (P)
[ 40.823221] ima_kexec_post_load+0x58/0xc0
[ 40.827246] __do_sys_kexec_file_load+0x29c/0x368
[...]
[ 40.855423] ---[ end trace 0000000000000000 ]---
*** How to reproduce ***
This bug is only triggered when the kexec target address is allocated in
the CMA area. If no CMA area is reserved in the kernel, use the "cma="
option in the kernel command line to reserve one.
*** Root cause ***
The commit 07d24902977e ("kexec: enable CMA based contiguous
allocation") allocates the kexec target address directly on the CMA area
to avoid copying during the jump. In this case, there is no IND_SOURCE
for the kexec segment. But the current implementation of
kimage_map_segment() assumes that IND_SOURCE pages exist and map them
into a contiguous virtual address by vmap().
*** Solution ***
If IMA segment is allocated in the CMA area, use its page_address()
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Use spinlock for context list protection lock
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tilcdc: Fix removal actions in case of failed probe
The drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpers
should only be called when the device has been successfully registered.
Currently, these functions are called unconditionally in tilcdc_fini(),
which causes warnings during probe deferral scenarios.
[ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68
...
[ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108
[ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8
[ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144
[ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc]
[ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc]
Fix this by rewriting the failed probe cleanup path using the standard
goto error handling pattern, which ensures that cleanup functions are
only called on successfully initialized resources. Additionally, remove
the now-unnecessary is_registered flag. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuset: fix warning when disabling remote partition
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| YouPHPTube <= 7.8 contains a cross-site scripting vulnerability that allows attackers to inject malicious scripts through the redirectUri parameter in the signup page. Attackers can craft special signup URLs with embedded script tags to execute arbitrary JavaScript in victims' browsers when they access the signup page. |
| VIAVIWEB Wallpaper Admin 1.0 contains a SQL injection vulnerability that allows attackers to bypass authentication by manipulating login credentials. Attackers can exploit the login page by injecting 'admin' or 1=1-- - payload to gain unauthorized access to the administrative interface. |
| VIAVIWEB Wallpaper Admin 1.0 contains an unauthenticated remote code execution vulnerability in the image upload functionality. Attackers can upload a malicious PHP file through the add_gallery_image.php endpoint to execute arbitrary code on the server. |
| VIAVIWEB Wallpaper Admin 1.0 contains an SQL injection vulnerability that allows authenticated attackers to manipulate database queries by injecting SQL code through the img_id parameter. Attackers can send GET requests to edit_gallery_image.php with malicious img_id values to extract database information. |
| Testa 3.5.1 contains a reflected cross-site scripting vulnerability in the login.php redirect parameter that allows attackers to inject malicious scripts. Attackers can craft a specially encoded payload in the redirect parameter to execute arbitrary JavaScript in victim's browser context. |
| ImpressCMS 1.4.4 contains a file upload vulnerability with weak extension sanitization that allows attackers to upload potentially malicious files. Attackers can bypass file upload restrictions by using alternative file extensions .php2.php6.php7.phps.pht to execute arbitrary PHP code on the server. |
| ITeC ITeCProteccioAppServer contains an unquoted service path vulnerability that allows local attackers to execute code with elevated system privileges. Attackers can insert a malicious executable in the service path to gain elevated access during service restart or system reboot. |
| VIVE Runtime Service 1.0.0.4 contains an unquoted service path vulnerability that allows local users to execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted binary path by placing malicious executables in specific system directories to gain LocalSystem access during service startup. |
| Tdarr 2.00.15 contains an unauthenticated remote code execution vulnerability in its Help terminal that allows attackers to inject and chain arbitrary commands. Attackers can exploit the lack of input filtering by chaining commands like `--help; curl .py | python` to execute remote code without authentication. |
| Connectify Hotspot 2018 contains an unquoted service path vulnerability in its ConnectifyService executable that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files (x86)\Connectify\ConnectifyService.exe' to inject malicious executables and escalate privileges. |
| Emerson PAC Machine Edition 9.80 contains an unquoted service path vulnerability in the TrapiServer service that allows local users to potentially execute code with elevated privileges. Attackers can exploit the unquoted path in the service configuration to inject malicious code that would execute with LocalSystem permissions during service startup. |
| TeamSpeak 3.5.6 contains an insecure file permissions vulnerability that allows local attackers to replace executable files with malicious binaries. Attackers can replace system executables like ts3client_win32.exe with custom files to potentially gain SYSTEM or Administrator-level access. |
| CONTPAQi AdminPAQ 14.0.0 contains an unquoted service path vulnerability in the AppKeyLicenseServer service running with LocalSystem privileges. Attackers can exploit the unquoted path to inject malicious code in the service binary path, potentially executing arbitrary code with elevated system privileges during service startup. |
| Zstore, now referred to as Zippy CRM, 6.5.4 contains a reflected cross-site scripting vulnerability that allows attackers to inject malicious scripts through unvalidated input parameters. Attackers can submit crafted payloads in manual insertion points to execute arbitrary JavaScript code in victim's browser context. |
