| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libde265 is an open source implementation of the h.265 video codec. Prior to version 1.0.19, `decoder_context::decode_slice_unit_tiles` (libde265/decctx.cc:920) reads `pps.CtbAddrRStoTS[ctbAddrRS]` at line 966 where `ctbAddrRS = ctbY * ctbsWidth + ctbX` is computed from PPS-supplied `colBd[]`/`rowBd[]` arrays without validating the result against `CtbAddrRStoTS.size() == sps->PicSizeInCtbsY`. A malformed PPS that passes `set_derived_values` but encodes geometry inconsistent with the SPS produces a `ctbAddrRS` past the allocation, causing a 4-byte heap-buffer-overflow READ. Version 1.0.19 fixes the issue. |
| libde265 is an open source implementation of the h.265 video codec. Versions prior to 1.0.19 have a heap buffer overflow (out-of-bounds READ) exists in `decoder_context::decode_slice_unit_WPP()` in `libde265/decctx.cc`. When decoding a WPP (Wavefront Parallel Processing) HEVC slice, `ctbAddrRS` is computed as `ctbRow * ctbsWidth` inside the entry-point loop. If the PPS/SPS headers are crafted so that this value exceeds `pps.CtbAddrRStoTS.size()`, the subsequent array access `pps.CtbAddrRStoTS[ctbAddrRS]` reads past the end of the allocated vector, triggering a heap-buffer-overflow confirmed by AddressSanitizer. Version 1.0.19 patches the issue. |
| libheif is a HEIF and AVIF file format decoder and encoder. The fix for CVE-2026-3949 (commit `b97c8b5`, PR #1712) introduced an integer overflow in the very security check it added. The check itself can be bypassed, allowing a crafted HEIF file with a VVC track to trigger the same out-of-bounds heap read that CVE-2026-3949 was meant to prevent. This is a separate, currently-unpatched vulnerability. Issue #1712 was closed as fixed without testing the edge case where `size` is near `UINT32_MAX`. Version 1.22.0 patches the issue. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.0, `Track::init_sample_timing_table()` in `libheif/sequences/track.cc` stores an out-of-bounds chunk index (`m_chunks.size()`) into `m_presentation_timeline` when the number of chunks defined in the `stco` box is less than the number of samples in `stsz`. A subsequent call to `heif_track_get_next_raw_sequence_sample()` reads `m_chunks[chunk_idx]` with that OOB index, causing a heap-buffer-overflow. Version 1.22.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: belkin_sa: validate interrupt status length
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.19.0 through 1.21.2 have a heap OOB read in ImageItem_Grid::decode_grid_tile via irot-induced tile-coordinate underflow. Version 1.22.0 fixes the issue. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| Heap-based buffer overflow in the SOHM list-index deserialization code in HDF5 through 2.1.1 on all platforms allows attackers to cause a denial of service (crash) via a crafted HDF5 file whose shared-message list index declares a num_messages count exceeding list_max, triggering out-of-bounds heap reads and writes in H5SM__cache_list_deserialize and H5SM__cache_list_verify_chksum. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| A flaw was found in libsoup. An unsigned integer underflow in the soup_filter_input_stream_read_until() function causes a heap buffer over-read when parsing multipart HTTP responses. A malicious HTTP server can exploit this by sending a crafted multipart response, potentially causing the client application to crash or disclose sensitive heap memory. |
| Out-of-bounds Read (CWE-125) in BACnet packet parsing (`bacdt_datetime_to_tod`) in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.18 on LINX-A64 allows an unauthenticated remote attacker to crash `linx_a64.exe` and ultimately reboot the device via a malformed BACnet TimeSynchronization or UTC-TimeSynchronization packet with an invalid month value. The same vulnerability affects multiple other Loytec products. |
| Out-of-bounds read vulnerability in Citrix Citrix Secure Access Client for Windows.
This issue affects Citrix Secure Access Client for Windows: before 26.6.1.20. |
| A vulnerability has been found in ggml-org whisper.cpp 1.8.4-58. This impacts the function log_mel_spectrogram of the file src/whisper.cpp. The manipulation leads to out-of-bounds read. The attack needs to be performed locally. The pull request to fix this issue awaits acceptance. |
| Improper Validation of Specified Quantity in Input, Out-of-bounds Read vulnerability in Apache Thrift C++ bindings.
This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| Out-of-bounds Read vulnerability in Apache Thrift c_glib bindings.
This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
