| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: use skb_header_pointer() for TCPv4 GSO frag_off check
Syzbot reported a KMSAN uninit-value warning in gso_features_check()
called from netif_skb_features() [1].
gso_features_check() reads iph->frag_off to decide whether to clear
mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr()
can rely on skb header offsets that are not always safe for direct
dereference on packets injected from PF_PACKET paths.
Use skb_header_pointer() for the TCPv4 frag_off check so the header read
is robust whether data is already linear or needs copying.
[1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: close crash window in attr dabtree inactivation
When inactivating an inode with node-format extended attributes,
xfs_attr3_node_inactive() invalidates all child leaf/node blocks via
xfs_trans_binval(), but intentionally does not remove the corresponding
entries from their parent node blocks. The implicit assumption is that
xfs_attr_inactive() will truncate the entire attr fork to zero extents
afterwards, so log recovery will never reach the root node and follow
those stale pointers.
However, if a log shutdown occurs after the leaf/node block cancellations
commit but before the attr bmap truncation commits, this assumption
breaks. Recovery replays the attr bmap intact (the inode still has
attr fork extents), but suppresses replay of all cancelled leaf/node
blocks, maybe leaving them as stale data on disk. On the next mount,
xlog_recover_process_iunlinks() retries inactivation and attempts to
read the root node via the attr bmap. If the root node was not replayed,
reading the unreplayed root block triggers a metadata verification
failure immediately; if it was replayed, following its child pointers
to unreplayed child blocks triggers the same failure:
XFS (pmem0): Metadata corruption detected at
xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78
XFS (pmem0): Unmount and run xfs_repair
XFS (pmem0): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117
Fix this in two places:
In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on a
child block, immediately remove the entry that references it from the
parent node in the same transaction. This eliminates the window where
the parent holds a pointer to a cancelled block. Once all children are
removed, the now-empty root node is converted to a leaf block within the
same transaction. This node-to-leaf conversion is necessary for crash
safety. If the system shutdown after the empty node is written to the
log but before the second-phase bmap truncation commits, log recovery
will attempt to verify the root block on disk. xfs_da3_node_verify()
does not permit a node block with count == 0; such a block will fail
verification and trigger a metadata corruption shutdown. on the other
hand, leaf blocks are allowed to have this transient state.
In xfs_attr_inactive(), split the attr fork truncation into two explicit
phases. First, truncate all extents beyond the root block (the child
extents whose parent references have already been removed above).
Second, invalidate the root block and truncate the attr bmap to zero in
a single transaction. The two operations in the second phase must be
atomic: as long as the attr bmap has any non-zero length, recovery can
follow it to the root block, so the root block invalidation must commit
together with the bmap-to-zero truncation. |
| Lupa integrates the runtimes of Lua or LuaJIT2 into CPython. In 2.6 and earlier, attribute_filter is not consistently applied when attributes are accessed through built-in functions like getattr and setattr. This allows an attacker to bypass the intended restrictions and eventually achieve arbitrary code execution. |
| A flaw was found in libtheora. This heap-based out-of-bounds read vulnerability exists within the AVI (Audio Video Interleave) parser, specifically in the avi_parse_input_file() function. A local attacker could exploit this by tricking a user into opening a specially crafted AVI file containing a truncated header sub-chunk. This could lead to a denial-of-service (application crash) or potentially leak sensitive information from the heap. |
| FRRouting before 10.5.3 contains an integer overflow vulnerability in seven OSPF Traffic Engineering and Segment Routing TLV parser functions where a uint16_t accumulator variable truncates uint32_t values returned by the TLV_SIZE() macro, causing the loop termination condition to fail while pointer advancement continues unchecked. Attackers with an established OSPF adjacency can send a crafted LS Update packet with a malicious Type 10 or Type 11 Opaque LSA to trigger out-of-bounds memory reads and crash all affected routers in the OSPF area or autonomous system. |
| Unsafe deserialization vulnerability in MixPHP Framework 2.x thru 2.2.17. The sync-invoke TCP server (Server.php:87) receives data from a TCP socket, passes it directly to Opis\Closure\unserialize(), then executes the result via call_user_func(). No authentication or signature verification exists on the TCP connection. An attacker with access to the localhost TCP port (server binds 127.0.0.1) can send a crafted serialized PHP closure to achieve arbitrary code execution. |
| An issue was discovered in Vanetza V2X v26.02 allowing remote unauthorized attackers to cause a denial of service. The vulnerability exists in the GeoNetworking packet processing pipeline where OpenSSL exceptions from ECC point validation (invalid compressed point, point not on curve) are not properly caught by the Router::indicate() call chain. The openssl_wrapper.cpp check() function (line 19) throws openssl::Exception when OpenSSL operations fail. The parser's catch block in parse_secured() should catch these, but the exception escapes through subsequent processing stages (indicate_common, indicate_extended). This causes std::terminate, crashing the V2X receiver. |
| AGL app-framework-binder (afb-daemon) through v19.90.0 contains a privilege escalation vulnerability in the supervision Do command. The on_supervision_call function in src/afb-supervision.c explicitly nullifies the request credentials by calling afb_context_change_cred(&xreq->context, NULL) before dispatching an attacker-controlled API call via xapi->itf->call(xapi->closure, xreq). The NULL propagation chain through afb-context.c:110 (context->credentials = afb_cred_addref(NULL)) and afb-cred.c:163 (returns NULL when cred is NULL) confirms that credentials are zeroed before the target API executes. The attacker controls both api and verb parameters via JSON input, allowing execution of any registered API with a NULL credential context. APIs that rely on context->credentials for authorization decisions may fail open when receiving NULL credentials, enabling privilege escalation. This vulnerability was introduced in commit abbb4599f0b921c6f434b6bd02bcfb277eecf745 on 2018-02-14. |
| AGL app-framework-binder (afb-daemon) through v19.90.0 allows any local process to execute privileged supervision commands (Exit, Do, Sclose, Config, Trace, Debug, Token, slist) without authentication via the abstract Unix socket @urn:AGL:afs:supervision:socket. The on_supervision_call function in src/afb-supervision.c dispatches all 8 commands without any credential verification. The abstract socket has no DAC protection, as acknowledged in the official CAUTION comment in src/afs-supervision.h. This allows a low-privileged local process to kill the daemon (DoS via Exit command), execute arbitrary API calls (via Do command), close arbitrary user sessions (via Sclose command), or leak the entire global configuration (via Config command). The vulnerability was introduced in commit b8c9d5de384efcfa53ebdb3f0053d7b3723777e1 on 2017-06-29. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: take a reference on the USB device in create_card()
The caiaq driver stores a pointer to the parent USB device in
cdev->chip.dev but never takes a reference on it. The card's
private_free callback, snd_usb_caiaq_card_free(), can run
asynchronously via snd_card_free_when_closed() after the USB
device has already been disconnected and freed, so any access to
cdev->chip.dev in that path dereferences a freed usb_device.
On top of the refcounting issue, the current card_free implementation
calls usb_reset_device(cdev->chip.dev). A reset in a free callback
is inappropriate: the device is going away, the call takes the
device lock in a teardown context, and the reset races with the
disconnect path that the callback is already cleaning up after.
Take a reference on the USB device in create_card() with
usb_get_dev(), drop it with usb_put_dev() in the free callback,
and remove the usb_reset_device() call. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently. |
| AGL agl-service-can-low-level thru 17.1.12 contains a heap buffer over-read in the isotp-c library. In isotp_continue_receive (receive.c:87-89), the payload_length for a Single Frame is extracted from a 4-bit nibble in the CAN frame data, yielding values 0-15. However, a standard CAN frame is only 8 bytes, with payload starting at data[1] (7 bytes available). When payload_length exceeds the available data (e.g., nibble=15 but only 7 payload bytes exist), memcpy(message.payload, &data[1], payload_length) reads up to 8 bytes past the end of the data buffer. |
| openxc/isotp-c thru commit 5a5d19245f65189202719321facd49ce6f5d46ac (2021-08-09) contains an out-of-bounds read in the ISO-TP Single Frame receive handler, where the 4-bit payload length nibble is used directly as the memcpy size without validating it against the actual CAN data length. A malicious CAN frame with an oversized length nibble can cause memory reads beyond the buffer, allowing attackers to cause a denial of service, or gain sensitive information. |
| miaofng/uds-c commit e506334e270d77b20c0bc259ac6c7d8c9b702b7a (2016-10-05) contains a stack buffer overflow in send_diagnostic_request. A 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) receives memcpy at offset 1+pid_length with payload_length bytes. MAX_UDS_REQUEST_PAYLOAD_LENGTH=7, so 1+2+7=10 exceeds buffer by 4 bytes. No bounds check on payload_length before memcpy. |
| collin80/Open-SAE-J1939 thru commit 744024d4306bc387857dfce439558336806acb06 (2023-03-08) contains an integer underflow leading to out-of-bounds write in Transport Protocol Data Transfer handling. At line 23: uint8_t index = data[0] - 1. When data[0] (sequence number from CAN frame) is 0, index underflows to 255. Subsequent write at tp_dt->data[255*7 + i-1] reaches offset 1791, exceeding the MAX_TP_DT buffer (1785 bytes) by 6 bytes. |
| IBM i 7.6, 7.5, 7.4, 7.3, and 7.2 s vulnerable to privilege escalation caused by an invalid IBM i Web Administration GUI authorization check. A malicious actor could cause user-controlled code to run with administrator privilege. |
| A weakness has been identified in LinkStackOrg LinkStack up to 4.8.6. Impacted is the function editPage of the file app/Http/Controllers/UserController.php. Executing a manipulation of the argument pageDescription can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through a pull request but has not reacted yet. |
| IBM Langflow Desktop 1.0.0 through 1.8.4 Langflow could allow an unauthenticated user to view other users' images due to an indirect object reference through a user-controlled key. |
