| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Route Services can be leveraged to send app traffic to network destinations outside of an app's configured egress rules. As a result, a malicious developer with access to Cloudfoundry could configure a route-service that would allow it to send requests to HTTP services on internal networks reachable by the Gorouter, which may not have previously had direct access from outside networks, or from the application.
Routing release: affected from v0.118.0 through v0.371.0 (inclusive); upgrade to v0.372.0 or greater. CF Deployment: affected from v0.0.2 through v54.14.0 (inclusive); upgrade to v55.0.0 or greater (includes routing_release v0.372.0). |
| A flaw has been found in UTT HiPER 1200GW up to 2.5.3-1703. The affected element is the function strcpy of the file /goform/formUser. Executing a manipulation can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| JS8Call through 2.3.1 and JS8Call-improved before 3.0 have a stack-based buffer overflow via a radio transmission of @APRSIS GRID followed by a long Maidenhead locator. This occurs in grid2deg in APRSISClient.cpp. |
| Bitwarden CLI 2026.4.0 from 2026-04-22T21:57Z to 2026-04-22T23:30Z, when obtained from npm, had embedded malicious code. This is related to a Checkmarx supply chain incident. |
| Users who connect to malicious registries with hostnames matching the bypass patterns will have their registry credentials exposed in plaintext. This issue is fixed in container version 0.12.3. |
| A vulnerability has been found in Fujian Apex LiveBOS up to 2.0. Impacted is an unknown function of the file /feed/UploadImage.do of the component Endpoint. Such manipulation of the argument filename leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1 is recommended to address this issue. Upgrading the affected component is advised. |
| In the Linux kernel, the following vulnerability has been resolved:
net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
NETIF_F_IPV6_CSUM only advertises support for checksum offload of
packets without IPv6 extension headers. Packets with extension
headers must fall back onto software checksumming. Since TSO
depends on checksum offload, those must revert to GSO.
The below commit introduces that fallback. It always checks
network header length. For tunneled packets, the inner header length
must be checked instead. Extend the check accordingly.
A special case is tunneled packets without inner IP protocol. Such as
RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by
transport header either, so also must revert to the software GSO path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in add_adev() error path
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: file: Use kzalloc_flex for aio_cmd
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Drain commands in target_reset handler
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: close crash window in attr dabtree inactivation
When inactivating an inode with node-format extended attributes,
xfs_attr3_node_inactive() invalidates all child leaf/node blocks via
xfs_trans_binval(), but intentionally does not remove the corresponding
entries from their parent node blocks. The implicit assumption is that
xfs_attr_inactive() will truncate the entire attr fork to zero extents
afterwards, so log recovery will never reach the root node and follow
those stale pointers.
However, if a log shutdown occurs after the leaf/node block cancellations
commit but before the attr bmap truncation commits, this assumption
breaks. Recovery replays the attr bmap intact (the inode still has
attr fork extents), but suppresses replay of all cancelled leaf/node
blocks, maybe leaving them as stale data on disk. On the next mount,
xlog_recover_process_iunlinks() retries inactivation and attempts to
read the root node via the attr bmap. If the root node was not replayed,
reading the unreplayed root block triggers a metadata verification
failure immediately; if it was replayed, following its child pointers
to unreplayed child blocks triggers the same failure:
XFS (pmem0): Metadata corruption detected at
xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78
XFS (pmem0): Unmount and run xfs_repair
XFS (pmem0): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117
Fix this in two places:
In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on a
child block, immediately remove the entry that references it from the
parent node in the same transaction. This eliminates the window where
the parent holds a pointer to a cancelled block. Once all children are
removed, the now-empty root node is converted to a leaf block within the
same transaction. This node-to-leaf conversion is necessary for crash
safety. If the system shutdown after the empty node is written to the
log but before the second-phase bmap truncation commits, log recovery
will attempt to verify the root block on disk. xfs_da3_node_verify()
does not permit a node block with count == 0; such a block will fail
verification and trigger a metadata corruption shutdown. on the other
hand, leaf blocks are allowed to have this transient state.
In xfs_attr_inactive(), split the attr fork truncation into two explicit
phases. First, truncate all extents beyond the root block (the child
extents whose parent references have already been removed above).
Second, invalidate the root block and truncate the attr bmap to zero in
a single transaction. The two operations in the second phase must be
atomic: as long as the attr bmap has any non-zero length, recovery can
follow it to the root block, so the root block invalidation must commit
together with the bmap-to-zero truncation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix use-after-free in sock_def_readable()
A race condition exists between lec_atm_close() setting priv->lecd
to NULL and concurrent access to priv->lecd in send_to_lecd(),
lec_handle_bridge(), and lec_atm_send(). When the socket is freed
via RCU while another thread is still using it, a use-after-free
occurs in sock_def_readable() when accessing the socket's wait queue.
The root cause is that lec_atm_close() clears priv->lecd without
any synchronization, while callers dereference priv->lecd without
any protection against concurrent teardown.
Fix this by converting priv->lecd to an RCU-protected pointer:
- Mark priv->lecd as __rcu in lec.h
- Use rcu_assign_pointer() in lec_atm_close() and lecd_attach()
for safe pointer assignment
- Use rcu_access_pointer() for NULL checks that do not dereference
the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and
lecd_attach()
- Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(),
lec_handle_bridge() and lec_atm_send() to safely access lecd
- Use rcu_assign_pointer() followed by synchronize_rcu() in
lec_atm_close() to ensure all readers have completed before
proceeding. This is safe since lec_atm_close() is called from
vcc_release() which holds lock_sock(), a sleeping lock.
- Remove the manual sk_receive_queue drain from lec_atm_close()
since vcc_destroy_socket() already drains it after lec_atm_close()
returns.
v2: Switch from spinlock + sock_hold/put approach to RCU to properly
fix the race. The v1 spinlock approach had two issues pointed out
by Eric Dumazet:
1. priv->lecd was still accessed directly after releasing the
lock instead of using a local copy.
2. The spinlock did not prevent packets being queued after
lec_atm_close() drains sk_receive_queue since timer and
workqueue paths bypass netif_stop_queue().
Note: Syzbot patch testing was attempted but the test VM terminated
unexpectedly with "Connection to localhost closed by remote host",
likely due to a QEMU AHCI emulation issue unrelated to this fix.
Compile testing with "make W=1 net/atm/lec.o" passes cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Mitigate potential OOB by removing bogus memset()
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
[bentiss: changed the return value] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject root items with drop_progress and zero drop_level
[BUG]
When recovering relocation at mount time, merge_reloc_root() and
btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against
an impossible state: a non-zero drop_progress combined with a zero
drop_level in a root_item, which can be triggered:
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1545!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2
RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545
Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000
Call Trace:
merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861
btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195
btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130
open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640
btrfs_fill_super fs/btrfs/super.c:987 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1951 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline]
btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
RIP: 0033:0x7f969c9a8fde
Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f
---[ end trace 0000000000000000 ]---
The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic
metadata fuzzing tool that corrupts btrfs metadata at runtime.
[CAUSE]
A non-zero drop_progress.objectid means an interrupted
btrfs_drop_snapshot() left a resume point on disk, and in that case
drop_level must be greater than 0 because the checkpoint is only
saved at internal node levels.
Although this invariant is enforced when the kernel writes the root
item, it is not validated when the root item is read back from disk.
That allows on-disk corruption to provide an invalid state with
drop_progress.objectid != 0 and drop_level == 0.
When relocation recovery later processes such a root item,
merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The
same invalid metadata can also trigger the corresponding BUG_ON() in
btrfs_drop_snapshot().
[FIX]
Fix this by validating the root_item invariant in tree-checker when
reading root items from disk: if drop_progress.objectid is non-zero,
drop_level must also be non-zero. Reject such malformed metadata with
-EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot()
and triggers the BUG_ON.
After the fix, the same corruption is correctly rejected by tree-checker
and the BUG_ON is no longer triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix error handling in mshv_region_pin
The current error handling has two issues:
First, pin_user_pages_fast() can return a short pin count (less than
requested but greater than zero) when it cannot pin all requested pages.
This is treated as success, leading to partially pinned regions being
used, which causes memory corruption.
Second, when an error occurs mid-loop, already pinned pages from the
current batch are not properly accounted for before calling
mshv_region_invalidate_pages(), causing a page reference leak.
Treat short pins as errors and fix partial batch accounting before
cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix DMA corruption on long hmac keys
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The rounding was performed, but never actually used for the allocation.
Fix this by replacing kmemdup with kmalloc for a larger buffer,
followed by memcpy. |
