| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix stack-out-of-bounds read in l2cap_ecred_conn_req
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: platform: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Make sure to use pmu_ctx->pmu for groups
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048 |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent immediate PASID reuse case
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: add GFP_NOIO in the bio completion if needed
The bio completion path in the process context (e.g. dm-verity)
will directly call into decompression rather than trigger another
workqueue context for minimal scheduling latencies, which can
then call vm_map_ram() with GFP_KERNEL.
Due to insufficient memory, vm_map_ram() may generate memory
swapping I/O, which can cause submit_bio_wait to deadlock
in some scenarios.
Trimmed down the call stack, as follows:
f2fs_submit_read_io
submit_bio //bio_list is initialized.
mmc_blk_mq_recovery
z_erofs_endio
vm_map_ram
__pte_alloc_kernel
__alloc_pages_direct_reclaim
shrink_folio_list
__swap_writepage
submit_bio_wait //bio_list is non-NULL, hang!!!
Use memalloc_noio_{save,restore}() to wrap up this path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size. |
