| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A post-authentication Stack-based Buffer Overflow vulnerabilities in SonicOS allows a remote attacker to crash a firewall. |
| A post-authentication Path Traversal vulnerability in SonicOS allows an attacker to interact with usually restricted services. |
| A vulnerability in the access control mechanism of SonicOS may allow certain management interface functions to be accessible under specific conditions. |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader
Versions Affected:
before 2.5.9
before 3.0.0-M3
Description:
The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source.
A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load.
The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default.
Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. |
| Arbitrary Class Instantiation via Model Manifest in Apache OpenNLP ExtensionLoader
Versions Affected: before 2.5.9, before 3.0.0-M3
Description:
The ExtensionLoader.instantiateExtension(Class, String) method loads a class by its fully-qualified name via Class.forName() and invokes its no-arg constructor, with the class name sourced from the manifest.properties entry of a model archive. The existing isAssignableFrom check correctly rejects classes that are not subtypes of the expected extension interface (BaseToolFactory for factory=, ArtifactSerializer for serializer-class-*), but the check runs after Class.forName() has already loaded and initialized the named class.
Class.forName() with default initialization semantics executes the target class's static initializer before returning, so an attacker who can supply a crafted model archive can cause the static initializer of any class on the classpath to run during model loading, regardless of whether that class passes the subsequent type check.
Exploitation requires a class with attacker-useful side effects in its static initializer (for example, JNDI lookup, outbound network I/O, or filesystem access) to be present on the classpath, so this is not a drop-in remote code execution; however, the attack surface grows as third-party model distribution becomes more common (community model repositories, Hugging Face-style sharing), where users routinely load model files from origins they do not control. A secondary, narrower vector affects deployments that ship legitimate BaseToolFactory or ArtifactSerializer subclasses with side-effecting no-arg constructors: a malicious manifest can name such a class and force its constructor to run during model load.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces a package-prefix allowlist that is consulted before Class.forName() is invoked, so the static initializer of a disallowed class is never executed. Classes under the opennlp. prefix remain permitted by default. Deployments that load models referencing factories or serializers outside opennlp.* must opt those packages in, either programmatically via ExtensionLoader.registerAllowedPackage(String) before the first model load, or by setting the OPENNLP_EXT_ALLOWED_PACKAGES system property to a comma-separated list of allowed package prefixes.
Users who cannot upgrade immediately should ensure that all model files are sourced from trusted origins and should audit their classpath for classes with side-effecting static initializers or constructors, particularly any that perform JNDI lookups, network requests, or filesystem operations during class initialization. |
| An issue was discovered in Gambio 4.9.2.0 (patched in 2024-02 v1.0.0 for GX4 v4.0.0.0 to v4.9.2.0). The password reset function can be bypassed to set arbitrary passwords for arbitrary accounts if the ID is known. |
| A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution. |
| eLabFTW is an open source electronic lab notebook. In elabftw versions through 5.4.1, the login flow did not reliably preserve the multi-factor authentication state across authentication steps. Under certain conditions, an attacker with valid primary credentials could complete authentication with an attacker-controlled TOTP secret and bypass the additional factor. This could result in unauthorized account access. This issue is fixed in version 5.4.2. |
| IEEE 802.11 protocol dissector crash in Wireshark 4.6.0 to 4.6.4 |
| The Zingaya Click-to-Call plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'email', 'first_name', 'last_name', and 'phone' parameters on the plugin's sign-up admin page in all versions up to, and including, 1.0. This is due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix allows a denial of service via the long-poll transport's NDJSON body handling.
In 'Elixir.Phoenix.Transports.LongPoll':publish/4, when a POST request is received with Content-Type: application/x-ndjson, the request body is split on newline characters using String.split/2 with no limit on the number of resulting segments. An attacker can send a body consisting entirely of newline bytes, causing a 1:1 amplification into a list of empty binaries — a 1 MB body produces approximately one million list elements, an 8 MB body approximately 8.4 million. Each element is then walked by Enum.map, materializing another list of the same size. This exhausts BEAM memory and schedulers, crashing the node and terminating all active sessions.
A session token required to reach the vulnerable endpoint is freely obtainable by any client via an unauthenticated GET request to the same URL with a matching Origin header, making this attack effectively unauthenticated.
This issue affects phoenix: from 1.7.0 before 1.7.22 and 1.8.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| The Subscribe To Comments Reloaded plugin for WordPress is vulnerable to unauthorized modification of data due to a leaked secret key and usage of a weak hash generation algorithm in all versions up to, and including, 240119. This makes it possible for unauthenticated attackers to extract the global key from any public post page, forge authorization keys and manage comment subscription preferences for arbitrary users |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue. |
| RedwoodSDK is a server-first React framework. From 1.0.0-beta.50 to 1.0.5, erver functions exported from "use server" files could be invoked via GET requests, bypassing their intended HTTP method. In cookie-authenticated applications, this allowed cross-site GET navigations to trigger state-changing functions, because browsers send SameSite=Lax cookies on top-level GET requests. This affected all server functions -- both serverAction() handlers and bare exported functions in "use server" files. This vulnerability is fixed in 1.0.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix negative array index read
Avoid using the negative values
for clk_idex as an index into an array pptable->DpmDescriptor.
V2: fix clk_index return check (Tim Huang) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5dce ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration
[Why]
Coverity reports Memory - illegal accesses.
[How]
Skip inactive planes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: axg-card: fix 'use-after-free'
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x90
print_report+0xfc/0x5c0
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
platform_probe+0x8c/0xf4
really_probe+0x110/0x39c
__driver_probe_device+0xb8/0x18c
driver_probe_device+0x108/0x1d8
__driver_attach+0xd0/0x25c
bus_for_each_dev+0xe0/0x154
driver_attach+0x34/0x44
bus_add_driver+0x134/0x294
driver_register+0xa8/0x1e8
__platform_driver_register+0x44/0x54
axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
do_one_initcall+0xdc/0x25c
do_init_module+0x10c/0x334
load_module+0x24c4/0x26cc
init_module_from_file+0xd4/0x128
__arm64_sys_finit_module+0x1f4/0x41c
invoke_syscall+0x60/0x188
el0_svc_common.constprop.0+0x78/0x13c
do_el0_svc+0x30/0x40
el0_svc+0x38/0x78
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194 |
