| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
quota: flush quota_release_work upon quota writeback
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: sysfs: Prevent div by zero
Prevent a division by 0 when monitoring is not enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu: Defer probe of clients after smmu device bound
Null pointer dereference occurs due to a race between smmu
driver probe and client driver probe, when of_dma_configure()
for client is called after the iommu_device_register() for smmu driver
probe has executed but before the driver_bound() for smmu driver
has been called.
Following is how the race occurs:
T1:Smmu device probe T2: Client device probe
really_probe()
arm_smmu_device_probe()
iommu_device_register()
really_probe()
platform_dma_configure()
of_dma_configure()
of_dma_configure_id()
of_iommu_configure()
iommu_probe_device()
iommu_init_device()
arm_smmu_probe_device()
arm_smmu_get_by_fwnode()
driver_find_device_by_fwnode()
driver_find_device()
next_device()
klist_next()
/* null ptr
assigned to smmu */
/* null ptr dereference
while smmu->streamid_mask */
driver_bound()
klist_add_tail()
When this null smmu pointer is dereferenced later in
arm_smmu_probe_device, the device crashes.
Fix this by deferring the probe of the client device
until the smmu device has bound to the arm smmu driver.
[will: Add comment] |
| In the Linux kernel, the following vulnerability has been resolved:
ad7780: fix division by zero in ad7780_write_raw()
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*... |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability during JSP compilation in Apache Tomcat permits an RCE on case insensitive file systems when the default servlet is enabled for write (non-default configuration).
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Initialize denominators' default to 1
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. |
| FreeRDP is a free remote desktop protocol library and clients. Affected versions of FreeRDP are missing input validation in `urbdrc` channel. A malicious server can trick a FreeRDP based client to crash with division by zero. This issue has been addressed in version 2.9.0. All users are advised to upgrade. Users unable to upgrade should not use the `/usb` redirection switch. |
| A race condition vulnerability has been identified in Shopware's voucher system of Shopware v6.6.10.4 that allows attackers to bypass intended voucher restrictions and exceed usage limitations. |
| Race condition in Canonical apport up to and including 2.32.0 allows a local attacker to leak sensitive information via PID-reuse by leveraging namespaces.
When handling a crash, the function `_check_global_pid_and_forward`, which detects if the crashing process resided in a container, was being called before `consistency_checks`, which attempts to detect if the crashing process had been replaced. Because of this, if a process crashed and was quickly replaced with a containerized one, apport could be made to forward the core dump to the container, potentially leaking sensitive information. `consistency_checks` is now being called before `_check_global_pid_and_forward`. Additionally, given that the PID-reuse race condition cannot be reliably detected from userspace alone, crashes are only forwarded to containers if the kernel provided a pidfd, or if the crashing process was unprivileged (i.e., if dump mode == 1). |
| Floating point exception in fig2dev in version 3.2.9a allows an attacker to availability via local input manipulation via get_slope function. |
| A race condition vulnerability exists in the aVideoEncoder.json.php unzip functionality of WWBN AVideo 14.4 and dev master commit 8a8954ff. A series of specially crafted HTTP request can lead to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: Prevent parser TCAM memory corruption
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter. |
| In the Linux kernel, the following vulnerability has been resolved:
media: streamzap: fix race between device disconnection and urb callback
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: protect driver attr handlers against module unload
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject cooked mode if it is set along with other flags
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check denominator crb_pipes before used
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity. |
| TOCTOU Race Condition vulnerability in apport allows a local attacker to escalate privileges and execute arbitrary code. An attacker may exit the crashed process and exploit PID recycling to spawn a root process with the same PID as the crashed process, which can then be used to escalate privileges. Fixed in 2.20.1-0ubuntu2.24, 2.20.9 versions prior to 2.20.9-0ubuntu7.16 and 2.20.11 versions prior to 2.20.11-0ubuntu27.6. Was ZDI-CAN-11234. |
| Race condition in Apport before 2.17.2-0ubuntu1.1 as packaged in Ubuntu 15.04, before 2.14.70ubuntu8.5 as packaged in Ubuntu 14.10, before 2.14.1-0ubuntu3.11 as packaged in Ubuntu 14.04 LTS, and before 2.0.1-0ubuntu17.9 as packaged in Ubuntu 12.04 LTS allow local users to write to arbitrary files and gain root privileges. |
