| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU in ip6_xmit()
Use RCU in ip6_xmit() in order to use dst_dev_rcu() to prevent
possible UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't leak disconnected dentries on umount
When user calls open_by_handle_at() on some inode that is not cached, we
will create disconnected dentry for it. If such dentry is a directory,
exportfs_decode_fh_raw() will then try to connect this dentry to the
dentry tree through reconnect_path(). It may happen for various reasons
(such as corrupted fs or race with rename) that the call to
lookup_one_unlocked() in reconnect_one() will fail to find the dentry we
are trying to reconnect and instead create a new dentry under the
parent. Now this dentry will not be marked as disconnected although the
parent still may well be disconnected (at least in case this
inconsistency happened because the fs is corrupted and .. doesn't point
to the real parent directory). This creates inconsistency in
disconnected flags but AFAICS it was mostly harmless. At least until
commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")
which removed adding of most disconnected dentries to sb->s_anon list.
Thus after this commit cleanup of disconnected dentries implicitely
relies on the fact that dput() will immediately reclaim such dentries.
However when some leaf dentry isn't marked as disconnected, as in the
scenario described above, the reclaim doesn't happen and the dentries
are "leaked". Memory reclaim can eventually reclaim them but otherwise
they stay in memory and if umount comes first, we hit infamous "Busy
inodes after unmount" bug. Make sure all dentries created under a
disconnected parent are marked as disconnected as well. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: restrict sockets to TCP and UDP
Recently, syzbot started to abuse NBD with all kinds of sockets.
Commit cf1b2326b734 ("nbd: verify socket is supported during setup")
made sure the socket supported a shutdown() method.
Explicitely accept TCP and UNIX stream sockets. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Explicitly check accesses to bpf_sock_addr
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
pps: fix warning in pps_register_cdev when register device fail
Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
Modules linked in:
CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
Call Trace:
<TASK>
kobject_cleanup+0x136/0x410 lib/kobject.c:689
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0xe9/0x130 lib/kobject.c:737
put_device+0x24/0x30 drivers/base/core.c:3797
pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
tiocsetd drivers/tty/tty_io.c:2429 [inline]
tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix incorrect boolean values in af_alg_ctx
Commit 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in
af_alg_sendmsg") changed some fields from bool to 1-bit bitfields of
type u32.
However, some assignments to these fields, specifically 'more' and
'merge', assign values greater than 1. These relied on C's implicit
conversion to bool, such that zero becomes false and nonzero becomes
true.
With a 1-bit bitfields of type u32 instead, mod 2 of the value is taken
instead, resulting in 0 being assigned in some cases when 1 was intended.
Fix this by restoring the bool type. |
| A flaw was found in GLib. An integer overflow and buffer under-read occur when parsing a long invalid ISO 8601 timestamp with the g_date_time_new_from_iso8601() function. |
| An integer overflow can be triggered in SQLite’s `concat_ws()` function. The resulting, truncated integer is then used to allocate a buffer. When SQLite then writes the resulting string to the buffer, it uses the original, untruncated size and thus a wild Heap Buffer overflow of size ~4GB can be triggered. This can result in arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
The previous commit 0718a78f6a9f ("ALSA: usb-audio: Kill timer properly at
removal") patched a UAF issue caused by the error timer.
However, because the error timer kill added in this patch occurs after the
endpoint delete, a race condition to UAF still occurs, albeit rarely.
Additionally, since kill-cleanup for urb is also missing, freed memory can
be accessed in interrupt context related to urb, which can cause UAF.
Therefore, to prevent this, error timer and urb must be killed before
freeing the heap memory. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: Forbid FDB status change while nexthop is in a group
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line. Two lines later, we take
a mutex so I don't think this is an RCU safe region. Re-order it to do
the dereferences before queuing up the free. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent use-after-free during requeue-PI
syzbot managed to trigger the following race:
T1 T2
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue()
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
requeue_pi_wake_futex()
futex_requeue_pi_complete()
/* preempt */
* timeout/ signal wakes T1 *
futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED
futex_hash_put()
// back to userland, on stack futex_q is garbage
/* back */
wake_up_state(q->task, TASK_NORMAL);
In this scenario futex_wait_requeue_pi() is able to leave without using
futex_q::lock_ptr for synchronization.
This can be prevented by reading futex_q::task before updating the
futex_q::requeue_state. A reference on the task_struct is not needed
because requeue_pi_wake_futex() is invoked with a spinlock_t held which
implies a RCU read section.
Even if T1 terminates immediately after, the task_struct will remain valid
during T2's wake_up_state(). A READ_ONCE on futex_q::task before
futex_requeue_pi_complete() is enough because it ensures that the variable
is read before the state is updated.
Read futex_q::task before updating the requeue state, use it for the
following wakeup. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
[0]:
WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Modules linked in:
CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e
RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293
RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017
RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400
RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8
R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540
R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0
FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0
Call Trace:
<IRQ>
tcp_write_timer (net/ipv4/tcp_timer.c:738)
call_timer_fn (kernel/time/timer.c:1747)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372)
timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135)
tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035)
__walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1))
tmigr_handle_remote (kernel/time/timer_migration.c:1096)
handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580)
irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: split cgroup_destroy_wq into 3 workqueues
A hung task can occur during [1] LTP cgroup testing when repeatedly
mounting/unmounting perf_event and net_prio controllers with
systemd.unified_cgroup_hierarchy=1. The hang manifests in
cgroup_lock_and_drain_offline() during root destruction.
Related case:
cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event
cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio
Call Trace:
cgroup_lock_and_drain_offline+0x14c/0x1e8
cgroup_destroy_root+0x3c/0x2c0
css_free_rwork_fn+0x248/0x338
process_one_work+0x16c/0x3b8
worker_thread+0x22c/0x3b0
kthread+0xec/0x100
ret_from_fork+0x10/0x20
Root Cause:
CPU0 CPU1
mount perf_event umount net_prio
cgroup1_get_tree cgroup_kill_sb
rebind_subsystems // root destruction enqueues
// cgroup_destroy_wq
// kill all perf_event css
// one perf_event css A is dying
// css A offline enqueues cgroup_destroy_wq
// root destruction will be executed first
css_free_rwork_fn
cgroup_destroy_root
cgroup_lock_and_drain_offline
// some perf descendants are dying
// cgroup_destroy_wq max_active = 1
// waiting for css A to die
Problem scenario:
1. CPU0 mounts perf_event (rebind_subsystems)
2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work
3. A dying perf_event CSS gets queued for offline after root destruction
4. Root destruction waits for offline completion, but offline work is
blocked behind root destruction in cgroup_destroy_wq (max_active=1)
Solution:
Split cgroup_destroy_wq into three dedicated workqueues:
cgroup_offline_wq – Handles CSS offline operations
cgroup_release_wq – Manages resource release
cgroup_free_wq – Performs final memory deallocation
This separation eliminates blocking in the CSS free path while waiting for
offline operations to complete.
[1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Remove improper idxd_free
The call to idxd_free() introduces a duplicate put_device() leading to a
reference count underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
Call Trace:
<TASK>
idxd_remove+0xe4/0x120 [idxd]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x197/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
idxd_exit_module+0x34/0x7a0 [idxd]
__do_sys_delete_module.constprop.0+0x183/0x280
do_syscall_64+0x54/0xd70
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The idxd_unregister_devices() which is invoked at the very beginning of
idxd_remove(), already takes care of the necessary put_device() through the
following call path:
idxd_unregister_devices() -> device_unregister() -> put_device()
In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may
trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is
called immediately after, it can result in a use-after-free.
Remove the improper idxd_free() to avoid both the refcount underflow and
potential memory corruption during module unload. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: writeback: fix use-after-free in __mark_inode_dirty()
An use-after-free issue occurred when __mark_inode_dirty() get the
bdi_writeback that was in the progress of switching.
CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1
......
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mark_inode_dirty+0x124/0x418
lr : __mark_inode_dirty+0x118/0x418
sp : ffffffc08c9dbbc0
........
Call trace:
__mark_inode_dirty+0x124/0x418
generic_update_time+0x4c/0x60
file_modified+0xcc/0xd0
ext4_buffered_write_iter+0x58/0x124
ext4_file_write_iter+0x54/0x704
vfs_write+0x1c0/0x308
ksys_write+0x74/0x10c
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xe4
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x194/0x198
Root cause is:
systemd-random-seed kworker
----------------------------------------------------------------------
___mark_inode_dirty inode_switch_wbs_work_fn
spin_lock(&inode->i_lock);
inode_attach_wb
locked_inode_to_wb_and_lock_list
get inode->i_wb
spin_unlock(&inode->i_lock);
spin_lock(&wb->list_lock)
spin_lock(&inode->i_lock)
inode_io_list_move_locked
spin_unlock(&wb->list_lock)
spin_unlock(&inode->i_lock)
spin_lock(&old_wb->list_lock)
inode_do_switch_wbs
spin_lock(&inode->i_lock)
inode->i_wb = new_wb
spin_unlock(&inode->i_lock)
spin_unlock(&old_wb->list_lock)
wb_put_many(old_wb, nr_switched)
cgwb_release
old wb released
wb_wakeup_delayed() accesses wb,
then trigger the use-after-free
issue
Fix this race condition by holding inode spinlock until
wb_wakeup_delayed() finished. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure
page tables are properly synchronized when calling p*d_populate_kernel().
For 5-level paging, synchronization is performed via
pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so
synchronization is instead performed at the P4D level via
p4d_populate_kernel().
This fixes intermittent boot failures on systems using 4-level paging and
a large amount of persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap
before sync_global_pgds() [1]:
BUG: unable to handle page fault for address: ffffeb3ff1200000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI
Tainted: [W]=WARN
RIP: 0010:vmemmap_set_pmd+0xff/0x230
<TASK>
vmemmap_populate_hugepages+0x176/0x180
vmemmap_populate+0x34/0x80
__populate_section_memmap+0x41/0x90
sparse_add_section+0x121/0x3e0
__add_pages+0xba/0x150
add_pages+0x1d/0x70
memremap_pages+0x3dc/0x810
devm_memremap_pages+0x1c/0x60
xe_devm_add+0x8b/0x100 [xe]
xe_tile_init_noalloc+0x6a/0x70 [xe]
xe_device_probe+0x48c/0x740 [xe]
[... snip ...] |
