| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM WebSphere Application Server Liberty 17.0.0.3 through 26.0.0.1 could allow a privileged user to upload a zip archive containing path traversal sequences resulting in an overwrite of files leading to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| The Popup Box plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 6.1.1. This is due to a flawed nonce implementation in the 'publish_unpublish_popupbox' function that verifies a self-created nonce rather than one submitted in the request. This makes it possible for unauthenticated attackers to change the publish status of popups via a forged request, granted they can trick a site administrator into performing an action such as clicking a link. |
| A weakness has been identified in Yealink MeetingBar A30 133.321.0.3. This issue affects some unknown processing of the component Diagnostic Handler. This manipulation causes command injection. It is feasible to perform the attack on the physical device. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in EFM ipTIME A8004T 14.18.2. This impacts the function httpcon_check_session_url of the file /cgi/timepro.cgi of the component Hidden Hiddenloginsetup Interface. The manipulation results in improper authentication. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in D-Link DSL-6641K N8.TR069.20131126. Affected by this issue is the function doSubmitPPP of the file sp_pppoe_user.js. The manipulation of the argument Username results in cross site scripting. The attack may be launched remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was determined in SourceCodester Medical Certificate Generator App 1.0. This affects an unknown part. This manipulation causes cross-site request forgery. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: drop fraglist conntrack references
Jakub added a warning in nf_conntrack_cleanup_net_list() to make debugging
leaked skbs/conntrack references more obvious.
syzbot reports this as triggering, and I can also reproduce this via
ip_defrag.sh selftest:
conntrack cleanup blocked for 60s
WARNING: net/netfilter/nf_conntrack_core.c:2512
[..]
conntrack clenups gets stuck because there are skbs with still hold nf_conn
references via their frag_list.
net.core.skb_defer_max=0 makes the hang disappear.
Eric Dumazet points out that skb_release_head_state() doesn't follow the
fraglist.
ip_defrag.sh can only reproduce this problem since
commit 6471658dc66c ("udp: use skb_attempt_defer_free()"), but AFAICS this
problem could happen with TCP as well if pmtu discovery is off.
The relevant problem path for udp is:
1. netns emits fragmented packets
2. nf_defrag_v6_hook reassembles them (in output hook)
3. reassembled skb is tracked (skb owns nf_conn reference)
4. ip6_output refragments
5. refragmented packets also own nf_conn reference (ip6_fragment
calls ip6_copy_metadata())
6. on input path, nf_defrag_v6_hook skips defragmentation: the
fragments already have skb->nf_conn attached
7. skbs are reassembled via ipv6_frag_rcv()
8. skb_consume_udp -> skb_attempt_defer_free() -> skb ends up
in pcpu freelist, but still has nf_conn reference.
Possible solutions:
1 let defrag engine drop nf_conn entry, OR
2 export kick_defer_list_purge() and call it from the conntrack
netns exit callback, OR
3 add skb_has_frag_list() check to skb_attempt_defer_free()
2 & 3 also solve ip_defrag.sh hang but share same drawback:
Such reassembled skbs, queued to socket, can prevent conntrack module
removal until userspace has consumed the packet. While both tcp and udp
stack do call nf_reset_ct() before placing skb on socket queue, that
function doesn't iterate frag_list skbs.
Therefore drop nf_conn entries when they are placed in defrag queue.
Keep the nf_conn entry of the first (offset 0) skb so that reassembled
skb retains nf_conn entry for sake of TX path.
Note that fixes tag is incorrect; it points to the commit introducing the
'ip_defrag.sh reproducible problem': no need to backport this patch to
every stable kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix NULL fb and crtc dereferences on USB disconnect
On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences. |
| A flaw was found in Keycloak’s CIBA feature where insufficient validation of client-configured backchannel notification endpoints could allow blind server-side requests to internal services. |
| Infor Storefront B2B 1.0 contains a SQL injection vulnerability that allows attackers to manipulate database queries through the 'usr_name' parameter in login requests. Attackers can exploit the vulnerability by injecting malicious SQL code into the 'usr_name' parameter to potentially extract or modify database information. |
| HelloWeb 2.0 contains an arbitrary file download vulnerability that allows remote attackers to download system files by manipulating filepath and filename parameters. Attackers can send crafted GET requests to download.asp with directory traversal to access sensitive configuration and system files. |
| e-Learning PHP Script 0.1.0 contains a SQL injection vulnerability in the search functionality that allows attackers to manipulate database queries through unvalidated user input. Attackers can inject malicious SQL code in the 'search' parameter to potentially extract, modify, or access sensitive database information. |
| Code Blocks 20.03 contains a denial of service vulnerability that allows attackers to crash the application by manipulating input in the FSymbols search field. Attackers can paste a large payload of 5000 repeated characters into the search field to trigger an application crash. |
| Frigate 2.02 contains a denial of service vulnerability that allows attackers to crash the application by sending oversized input to the command line interface. Attackers can generate a payload of 8000 repeated characters and paste it into the application's command line field to trigger an application crash. |
| Code Blocks 17.12 contains a local buffer overflow vulnerability that allows attackers to execute arbitrary code by crafting a malicious file name with Unicode characters. Attackers can trigger the vulnerability by pasting a specially crafted payload into the file name field during project creation, potentially executing system commands like calc.exe. |
| OpenCTI 3.3.1 is vulnerable to a directory traversal attack via the static/css endpoint. An unauthenticated attacker can read arbitrary files from the filesystem by sending crafted GET requests with path traversal sequences (e.g., '../') in the URL. For example, requesting /static/css//../../../../../../../../etc/passwd returns the contents of /etc/passwd. This vulnerability was discovered by Raif Berkay Dincel and confirmed on Linux Mint and Windows 10. |
| 10-Strike Bandwidth Monitor 3.9 contains a buffer overflow vulnerability that allows attackers to bypass SafeSEH, ASLR, and DEP protections through carefully crafted input. Attackers can exploit the vulnerability by sending a malicious payload to the application's registration key input, enabling remote code execution and launching arbitrary system commands. |
| Frigate 3.36.0.9 contains a local buffer overflow vulnerability in the Command Line input field that allows attackers to execute arbitrary code. Attackers can craft a malicious payload to overflow the buffer, bypass DEP, and execute commands like launching calc.exe through a specially crafted input sequence. |
| Quick Player 1.3 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by crafting a malicious .m3l file with carefully constructed payload. Attackers can trigger the vulnerability by loading a specially crafted file through the application's file loading mechanism, potentially enabling remote code execution. |
