| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The WatchGuard Mobile VPN with SSL Client on Windows does not properly configure directory permissions when installed in a non-default directory. This could allow an authenticated local attacker to escalate to SYSTEM privileges on a vulnerable system.
This issue affects Mobile VPN with SSL Client: from 11.0 through 12.11. |
| MSI Center before 2.0.52.0 has Missing PE Signature Validation. |
| Cross-Site Request Forgery (CSRF) vulnerability in Kevin Langley Jr. Post Type Converter post-type-converter allows Cross Site Request Forgery.This issue affects Post Type Converter: from n/a through <= 0.6. |
| The WatchGuard Terminal Services Agent on Windows does not properly configure directory permissions when installed in a non-default directory. This could allow an authenticated local attacker to escalate to SYSTEM privileges on a vulnerable system.
This issue affects Terminal Services Agent: from 12.0 through 12.10. |
| In the Linux kernel, the following vulnerability has been resolved:
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| The WordPress CRM, Email & Marketing Automation for WordPress | Award Winner — Groundhogg plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'process_export_delete' and 'process_import_delete' functions in all versions up to, and including, 4.1.1.2. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| An XSS issue was discovered in the Bootstrap Lite theme before 1.x-1.4.5 for Backdrop CMS. It doesn't sufficiently sanitize certain class names. |
| Cross-Site Request Forgery (CSRF) vulnerability in kasonzhao SEO For Images seo-for-images allows Stored XSS.This issue affects SEO For Images: from n/a through <= 1.0.0. |
| A vulnerability in the legacy chat component of Mitel MiContact Center Business through 10.0.0.4, 10.1.0.0 through 10.1.0.5, and 10.2.0.0 through 10.2.0.4 could allow an unauthenticated attacker to conduct a reflected cross-site scripting (XSS) attack due to insufficient input validation. A successful exploit requires user interaction and could allow an attacker to execute arbitrary scripts with a limited impact on the confidentiality and the integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the helper function is valid in get_helper_proto
kernel test robot reported verifier bug [1] where the helper func
pointer could be NULL due to disabled config option.
As Alexei suggested we could check on that in get_helper_proto
directly. Marking tail_call helper func with BPF_PTR_POISON,
because it is unused by design.
[1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com |
| An issue was discovered in Stormshield Network Security (SNS) 4.3.x before 4.3.35. If multicast streams are enabled on different interfaces, it may be possible to interrupt multicast traffic on some of these interfaces. That could result in a denial of the multicast routing service on the firewall. |
| Cross-Site Request Forgery (CSRF) vulnerability in wptableeditor Table Editor wp-table-editor allows Cross Site Request Forgery.This issue affects Table Editor: from n/a through <= 1.6.4. |
| Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability that is present starting in version 1.4.4-lts.1 and prior to version 2.0.1 allows an attacker to trigger a Denial of Service (DoS) by sending an upload file request with an empty string field name. This request causes an unhandled exception, leading to a crash of the process. Users should upgrade to `2.0.1` to receive a patch. No known workarounds are available. |
| operations/attestation/AttestationTask.kt in the Tangem SDK before 5.18.3 for Android has a logic flow in offline wallet attestation (genuineness check) that causes verification results to be disregarded during the first scan of a card. Exploitation may not have been possible. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: check for stable address space before operating on the VMA
It is possible to hit a zero entry while traversing the vmas in unuse_mm()
called from swapoff path and accessing it causes the OOPS:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000446--> Loading the memory from offset 0x40 on the
XA_ZERO_ENTRY as address.
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
The issue is manifested from the below race between the fork() on a
process and swapoff:
fork(dup_mmap()) swapoff(unuse_mm)
--------------- -----------------
1) Identical mtree is built using
__mt_dup().
2) copy_pte_range()-->
copy_nonpresent_pte():
The dst mm is added into the
mmlist to be visible to the
swapoff operation.
3) Fatal signal is sent to the parent
process(which is the current during the
fork) thus skip the duplication of the
vmas and mark the vma range with
XA_ZERO_ENTRY as a marker for this process
that helps during exit_mmap().
4) swapoff is tried on the
'mm' added to the 'mmlist' as
part of the 2.
5) unuse_mm(), that iterates
through the vma's of this 'mm'
will hit the non-NULL zero entry
and operating on this zero entry
as a vma is resulting into the
oops.
The proper fix would be around not exposing this partially-valid tree to
others when droping the mmap lock, which is being solved with [1]. A
simpler solution would be checking for MMF_UNSTABLE, as it is set if
mm_struct is not fully initialized in dup_mmap().
Thanks to Liam/Lorenzo/David for all the suggestions in fixing this
issue. |
| A vulnerability classified as critical was found in Casdoor up to 1.811.0. This vulnerability affects the function HandleScim of the file controllers/scim.go of the component SCIM User Creation Endpoint. The manipulation leads to authorization bypass. The attack can be initiated remotely. Upgrading to version 1.812.0 is able to address this issue. The name of the patch is 3d12ac8dc2282369296c3386815c00a06c6a92fe. It is recommended to upgrade the affected component. |
| Quick Agent V3 and Quick Agent V2 contain an issue with improper limitation of a pathname to a restricted directory ('Path Traversal'). If exploited, an arbitrary file in the affected product may be obtained by a remote attacker who can log in to the product. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tuner: xc5000: Fix use-after-free in xc5000_release
The original code uses cancel_delayed_work() in xc5000_release(), which
does not guarantee that the delayed work item timer_sleep has fully
completed if it was already running. This leads to use-after-free scenarios
where xc5000_release() may free the xc5000_priv while timer_sleep is still
active and attempts to dereference the xc5000_priv.
A typical race condition is illustrated below:
CPU 0 (release thread) | CPU 1 (delayed work callback)
xc5000_release() | xc5000_do_timer_sleep()
cancel_delayed_work() |
hybrid_tuner_release_state(priv) |
kfree(priv) |
| priv = container_of() // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the timer_sleep is properly canceled before the xc5000_priv memory
is deallocated.
A deadlock concern was considered: xc5000_release() is called in a process
context and is not holding any locks that the timer_sleep work item might
also need. Therefore, the use of the _sync() variant is safe here.
This bug was initially identified through static analysis.
[hverkuil: fix typo in Subject: tunner -> tuner] |
| Improper Link Resolution Before File Access ('Link Following') vulnerability in QFileSystemEngine in the Qt corelib module on Windows which potentially allows Symlink Attacks and the use of Malicious Files. Issue originates from CVE-2024-38081. The vulnerability arises from the use of the GetTempPath API, which can be exploited by attackers to manipulate temporary file paths, potentially leading to unauthorized access and privilege escalation. The affected public API in the Qt Framework is QDir::tempPath() and anything that uses it, such as QStandardPaths with TempLocation, QTemporaryDir, and QTemporaryFile.This issue affects all version of Qt up to and including 5.15.18, from 6.0.0 through 6.5.8, from 6.6.0 through 6.8.1. It is fixed in Qt 5.15.19, Qt 6.5.9, Qt 6.8.2, 6.9.0 |
| Out-of-bounds read for some TDX Module before version tdx1.5 within Ring 0: Hypervisor may allow an information disclosure. Software side channel adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
