| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in redqteam Alike - WordPress Custom Post Comparison alike allows Reflected XSS.This issue affects Alike - WordPress Custom Post Comparison: from n/a through <= 3.0.1. |
| SQL Anywhere Monitor (Non-GUI) baked credentials into the code,exposing the resources or functionality to unintended users and providing attackers with the possibility of arbitrary code execution.This could cause high impact on confidentiality integrity and availability of the system. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix mailbox API compatibility by negotiating supported features
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future. |
| Cross-Site Request Forgery (CSRF) vulnerability in mail250 Free WP Mail SMTP free-wp-mail-smtp allows Stored XSS.This issue affects Free WP Mail SMTP: from n/a through <= 1.0. |
| The server identity check mechanism for firmware upgrade performed via command shell is insecurely implemented potentially allowing an attacker to perform a Man-in-the-middle attack. This security issue has been fixed in the latest firmware version of Eaton G4 PDU which is available on the Eaton download center. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in nicdark Hotel Booking nd-booking allows PHP Local File Inclusion.This issue affects Hotel Booking: from n/a through <= 3.6. |
| SAP Starter Solution allows an authenticated attacker to execute crafted database queries, thereby exposing the back-end database. As a result, this vulnerability has a low impact on the application's confidentiality and integrity but no impact on its availability. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code. |
| Path Traversal: '.../...//' vulnerability in AA-Team Pro Bulk Watermark Plugin for WordPress allows Path Traversal.This issue affects Pro Bulk Watermark Plugin for WordPress: from n/a through 2.0. |
| A vulnerability classified as critical was found in risesoft-y9 Digital-Infrastructure up to 9.6.7. Affected by this vulnerability is the function deleteFile of the file /Digital-Infrastructure-9.6.7/y9-digitalbase-webapp/y9-module-filemanager/risenet-y9boot-webapp-filemanager/src/main/java/net/risesoft/y9public/controller/Y9FileController.java. The manipulation of the argument fullPath leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Kafbat UI is a web user interface for managing Apache Kafka clusters. An unsafe deserialization vulnerability in version 1.0.0 allows any unauthenticated user to execute arbitrary code on the server. Version 1.1.0 fixes the issue. |
| tar-fs provides filesystem bindings for tar-stream. Versions prior to 3.0.9, 2.1.3, and 1.16.5 have an issue where an extract can write outside the specified dir with a specific tarball. This has been patched in versions 3.0.9, 2.1.3, and 1.16.5. As a workaround, use the ignore option to ignore non files/directories. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ultimate Blocks Ultimate Blocks ultimate-blocks allows DOM-Based XSS.This issue affects Ultimate Blocks: from n/a through <= 3.2.9. |
| Due to missing authentication, SAP HANA 2.0 (hdbrss) allows an unauthenticated attacker to call a remote-enabled function that will enable them to view information. As a result, it has a low impact on the confidentiality but no impact on the integrity and availability of the system. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not assert we found block group item when creating free space tree
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94
R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001
R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0
Call Trace:
<TASK>
btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364
btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062
btrfs_remount_rw fs/btrfs/super.c:1334 [inline]
btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559
reconfigure_super+0x227/0x890 fs/super.c:1076
do_remount fs/namespace.c:3279 [inline]
path_mount+0xd1a/0xfe0 fs/namespace.c:4027
do_mount fs/namespace.c:4048 [inline]
__do_sys_mount fs/namespace.c:4236 [inline]
__se_sys_mount+0x313/0x410 fs/namespace.c:4213
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f424e39066a
Code: d8 64 89 02 (...)
RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a
RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000
RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020
R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380
R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in cybio Gallery Widget gallery-widget allows SQL Injection.This issue affects Gallery Widget: from n/a through <= 1.2.1. |
| Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When cloning a repository Git knows to optionally fetch a bundle advertised by the remote server, which allows the server-side to offload parts of the clone to a CDN. The Git client does not perform sufficient validation of the advertised bundles, which allows the remote side to perform protocol injection. This protocol injection can cause the client to write the fetched bundle to a location controlled by the adversary. The fetched content is fully controlled by the server, which can in the worst case lead to arbitrary code execution. The use of bundle URIs is not enabled by default and can be controlled by the bundle.heuristic config option. Some cases of the vulnerability require that the adversary is in control of where a repository will be cloned to. This either requires social engineering or a recursive clone with submodules. These cases can thus be avoided by disabling recursive clones. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1. |
| Cross-Site Request Forgery (CSRF) vulnerability in A WP Life Contact Form Widget new-contact-form-widget allows Cross Site Request Forgery.This issue affects Contact Form Widget: from n/a through <= 1.4.6. |
| SAP NetWeaver Enterprise Portal allows an unauthenticated attacker to inject JNDI environment properties or pass a URL used during JNDI lookup operations, enabling access to an unintended JNDI provider.�This could further lead to disclosure or modification of information about the server. There is no impact on availability. |
| The Netcom NTC 6200 and NWL 222 series expose a web interface to be configured and set up by operators. Multiple endpoints of the web interface are vulnerable to arbitrary command injection and use insecure hardcoded passwords. Remote authenticated attackers can gain arbitrary code execution with elevated privileges. |
