| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Incorrect Calculation vulnerability in the Layer 2 Control
Protocol
Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage.
When the issue is seen, the following log message will be generated:
op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP,
This issue affects Junos OS Evolved:
* all versions before 21.4R3-S7-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO. |
| A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in the method to collect FPC Ethernet firmware statistics of Juniper Networks Junos OS on MX10k Series allows a local, low-privileged attacker executing the 'show system firmware' CLI command to cause an LC480 or LC2101 line card to reset.
On MX10k Series systems with LC480 or LC2101 line cards, repeated execution of the 'show system firmware' CLI command can cause the line card to crash and restart. Additionally, some time after the line card crashes, chassisd may also crash and restart, generating a core dump.This issue affects Junos OS on MX10k Series:
* all versions before 21.2R3-S10,
* from 21.4 before 21.4R3-S9,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S6,
* from 23.2 before 23.2R2-S2,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R2. |
| An Incorrect Initialization of Resource vulnerability in the Internal Device Manager (IDM) of Juniper Networks Junos OS on EX4000 models allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
On EX4000 models with 48 ports (EX4000-48T, EX4000-48P, EX4000-48MP) a high volume of traffic destined to the device will cause an FXPC crash and restart, which leads to a complete service outage until the device has automatically restarted.
The following reboot reason can be seen in the output of 'show chassis routing-engine' and as a log message:
reason=0x4000002 reason_string=0x4000002:watchdog + panic with core dump
This issue affects Junos OS on EX4000-48T, EX4000-48P and EX4000-48MP:
* 24.4 versions before 24.4R2,
* 25.2 versions before 25.2R1-S2, 25.2R2.
This issue does not affect versions before 24.4R1 as the first Junos OS version for the EX4000 models was 24.4R1. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the Web-Filtering module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If an SRX device configured for UTM Web-Filtering receives a specifically malformed SSL packet, this will cause an FPC crash and restart.
This issue affects Junos OS on SRX Series:
* 23.2 versions from 23.2R2-S2 before 23.2R2-S5,
* 23.4 versions from 23.4R2-S1 before 23.4R2-S5,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R1-S3, 24.4R2.
Earlier versions of Junos are also affected, but no fix is available. |
| A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart.
This issue affects Junos OS on SRX and MX Series:
* all versions before 22.4R3-S7,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2. |
| The Vert.x Web static handler component cache can be manipulated to deny the access to static files served by the handler using specifically crafted request URI.
The issue comes from an improper implementation of the C. rule of section 5.2.4 of RFC3986 and is fixed in Vert.x Core component (used by Vert.x Web): https://github.com/eclipse-vertx/vert.x/pull/5895
Steps to reproduce
Given a file served by the static handler, craft an URI that introduces a string like bar%2F..%2F after the last / char to deny the access to the URI with an HTTP 404 response. For example https://example.com/foo/index.html can be denied with https://example.com/foo/bar%2F..%2Findex.html
Mitgation
Disabling Static Handler cache fixes the issue.
StaticHandler staticHandler = StaticHandler.create().setCachingEnabled(false); |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.35 and 3.6.7, there is a potential vulnerability in Traefik ACME TLS certificates' automatic generation: the ACME TLS-ALPN fast path can allow unauthenticated clients to tie up go routines and file descriptors indefinitely when the ACME TLS challenge is enabled. A malicious client can open many connections, send a minimal ClientHello with acme-tls/1, then stop responding, leading to denial of service of the entry point. The vulnerability is fixed in 2.11.35 and 3.6.7. |
| A stored cross-site scripting (XSS) vulnerability exists in the Altium Forum due to missing server-side input sanitization in forum post content. An authenticated attacker can inject arbitrary JavaScript into forum posts, which is stored and executed when other users view the affected post.
Successful exploitation allows the attacker’s payload to execute in the context of the victim’s authenticated Altium 365 session, enabling unauthorized access to workspace data, including design files and workspace settings. Exploitation requires user interaction to view a malicious forum post. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. Before 2.5.6, a prior patch aimed to block spawning Windows batch/shell files by returning an error when a spawned path’s extension matched .bat or .cmd. That check performs a case-sensitive comparison against lowercase literals and therefore can be bypassed when the extension uses alternate casing (for example .BAT, .Bat, etc.). This vulnerability is fixed in 2.5.6. |
| A stored cross-site scripting (XSS) vulnerability exists in the Altium Workflow Engine due to missing server-side input sanitization in workflow form submission APIs. A regular authenticated user can inject arbitrary JavaScript into workflow data.
When an administrator views the affected workflow, the injected payload executes in the administrator’s browser context, allowing privilege escalation, including creation of new administrator accounts, session token theft, and execution of administrative actions. |
| Police Statistics Database System developed by Gotac has a Absolute Path Traversal vulnerability, allowing unauthenticated remote attackers to enumerate the system file directory. |
| Police Statistics Database System developed by Gotac has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attacker to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
| Statistics Database System developed by Gotac has an Arbitrary File Read vulnerability, allowing unauthenticated remote attackers to exploit Relative Path Traversal to download arbitrary system files. |
| Statistics Database System developed by Gotac has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly exploit a specific functionality to query database contents. |
| Versions of the package net.sourceforge.plantuml:plantuml before 1.2026.0 are vulnerable to Stored XSS due to insufficient sanitization of interactive attributes in GraphViz diagrams. As a result, a crafted PlantUML diagram can inject malicious JavaScript into generated SVG output, leading to arbitrary script execution in the context of applications that render the SVG. |
| lucy-xss-filter before commit e5826c0 allows an attacker to execute malicious JavaScript due to improper sanitization caused by misconfigured default superset rule files. |
| Delta Electronics DIAView has Command Injection vulnerability. |
| Path Traversal vulnerability exists in multiple Network Cameras TRIFORA 3 series provided by TOA Corporation. If this vulnerability is exploited, arbitrary files on the affected product may be retrieved by a logged-in user with the low("monitoring user") or higher privilege. |
| TheLibrarians web_fetch tool can be used to retrieve the Adminer interface content, which can then be used to log into the internal TheLibrarian backend system. The vendor has fixed the vulnerability in all affected versions. |
| The Librarian `supervisord` status page can be retrieved by the `web_fetch` tool, which can be used to retrieve running processes within TheLibrarian backend. The vendor has fixed the vulnerability in all affected versions. |
