| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cross-Site Request Forgery (CSRF) vulnerability in Martin WP Compare Tables wp-compare-tables allows Stored XSS.This issue affects WP Compare Tables: from n/a through <= 1.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix field-spanning memcpy warning in AH output
Fix field-spanning memcpy warnings in ah6_output() and
ah6_output_done() where extension headers are copied to/from IPv6
address fields, triggering fortify-string warnings about writes beyond
the 16-byte address fields.
memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16)
WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439
The warnings are false positives as the extension headers are
intentionally placed after the IPv6 header in memory. Fix by properly
copying addresses and extension headers separately, and introduce
helper functions to avoid code duplication. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: Take a reference on the task in struct vhost_task.
vhost_task_create() creates a task and keeps a reference to its
task_struct. That task may exit early via a signal and its task_struct
will be released.
A pending vhost_task_wake() will then attempt to wake the task and
access a task_struct which is no longer there.
Acquire a reference on the task_struct while creating the thread and
release the reference while the struct vhost_task itself is removed.
If the task exits early due to a signal, then the vhost_task_wake() will
still access a valid task_struct. The wake is safe and will be skipped
in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix uninitialized waitqueue in transaction manager
The transaction manager initialization in txInit() was not properly
initializing TxBlock[0].waitor waitqueue, causing a crash when
txEnd(0) is called on read-only filesystems.
When a filesystem is mounted read-only, txBegin() returns tid=0 to
indicate no transaction. However, txEnd(0) still gets called and
tries to access TxBlock[0].waitor via tid_to_tblock(0), but this
waitqueue was never initialized because the initialization loop
started at index 1 instead of 0.
This causes a 'non-static key' lockdep warning and system crash:
INFO: trying to register non-static key in txEnd
Fix by ensuring all transaction blocks including TxBlock[0] have
their waitqueues properly initialized during txInit(). |
| Improper Control of Generation of Code ('Code Injection') vulnerability in bitto.kazi Custom Login And Signup Widget custom-login-and-signup-widget allows Code Injection.This issue affects Custom Login And Signup Widget: from n/a through <= 1.0. |
| Cross-Site Request Forgery (CSRF) vulnerability in Metin Saraç Popup for CF7 with Sweet Alert cf7-sweet-alert-popup allows Cross Site Request Forgery.This issue affects Popup for CF7 with Sweet Alert: from n/a through <= 1.6.5. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Write hgatp register with valid mode bits
According to the RISC-V Privileged Architecture Spec, when MODE=Bare
is selected,software must write zero to the remaining fields of hgatp.
We have detected the valid mode supported by the HW before, So using a
valid mode to detect how many vmid bits are supported. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Scott Taylor Shuffle shuffle allows Blind SQL Injection.This issue affects Shuffle: from n/a through <= 0.5. |
| Cross-Site Request Forgery (CSRF) vulnerability in Hossni Mubarak Cool Author Box hm-cool-author-box-widget allows Cross Site Request Forgery.This issue affects Cool Author Box: from n/a through <= 3.0.0. |
| UsbCoreDxe has a vulnerability which can be used to write arbitrary memory inside SMRAM and execute arbitrary code at SMM level. |
| Arduino IDE 2.x is an IDE based on the Theia IDE framework and built with Electron. A Self Cross-Site Scripting (XSS) vulnerability has been identified within the Arduino-IDE prior to version v2.3.5. The vulnerability occurs in the Additional Board Manager URLs field, which can be found in the Preferences -> Settings section of the Arduino IDE interface. In the vulnerable versions, any values entered in this field are directly displayed to the user through a notification tooltip object, without a proper output encoding routine, due to the underlying ElectronJS engine interpretation. This vulnerability exposes the input parameter to Self-XSS attacks, which may lead to security risks depending on where the malicious payload is injected. This vulnerability is fixed in 2.3.5. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add max boundary check for VF filters
There is no check for max filters that VF can request. Add it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write(). |
| An unauthenticated remote attacker can trick a high privileged user into uploading a malicious payload via the config-upload endpoint, leading to code injection as root. This results in a total loss of confidentiality, availability and integrity due to improper control of code generation ('Code Injection’). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix validation of VF state in get resources
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset. |
| umatiGateway is software for connecting OPC Unified Architecture servers with an MQTT broker utilizing JSON messages. The user interface may possibly be publicly accessible with umatiGateway's provided docker-compose file. With this access, the configuration can be viewed and altered. Commit 5d81a3412bc0051754a3095d89a06d6d743f2b16 uses `127.0.0.1:8080:8080` to limit access to the local network. For those who are unable to use this proposed patch, a firewall on Port 8080 may block remote access, but the workaround may not be perfect because Docker may also bypass a firewall by its iptable based rules for port forwarding. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix wrong index reference in smb2_compound_op()
In smb2_compound_op(), the loop that processes each command's response
uses wrong indices when accessing response bufferes.
This incorrect indexing leads to improper handling of command results.
Also, if incorrectly computed index is greather than or equal to
MAX_COMPOUND, it can cause out-of-bounds accesses. |
| The Booster Extension plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.2.0 via the 'booster_extension_authorbox_shortcode_display' function. This makes it possible for unauthenticated attackers to extract sensitive data including user emails |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Use correct exit on failure from futex_hash_allocate_default()
copy_process() uses the wrong error exit path from futex_hash_allocate_default().
After exiting from futex_hash_allocate_default(), neither tasklist_lock
nor siglock has been acquired. The exit label bad_fork_core_free unlocks
both of these locks which is wrong.
The next exit label, bad_fork_cancel_cgroup, is the correct exit.
sched_cgroup_fork() did not allocate any resources that need to freed.
Use bad_fork_cancel_cgroup on error exit from futex_hash_allocate_default(). |
| A cleartext transmission of sensitive information vulnerability in the affected products allows an unauthorized remote attacker to gain login credentials and access the Web-UI. |
