| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ardupilot through Plane-4.6.3 was found to contain an out-of-bounds read issue in libraries/GCS_MAVLink/GCS_serial_control.cpp in GCS_MAVLINK::handle_serial_control(). |
| mrubyc through release3.4.1 was found to contain an out-of-bounds read in builtin missing-method lookup inside mrbc_find_method(). |
| A flaw was found in libXpm. A local user with low privileges could exploit an Out-of-Bounds Read vulnerability in the `xpmNextWord()` function by processing a specially crafted or very small XPM (X PixMap) image file. This improper validation of file boundaries can cause an internal pointer to read beyond the file's end, leading to application crashes and Denial of Service conditions. |
| Out-of-bounds read, Out-of-bounds write vulnerability in Samsung Open Source Escargot allows Overflow Buffers.
This issue affects Escargot: before 779f6bedf58f334dec64b0a51ebb724b4708b84a. |
| Out-of-bounds read, Reachable assertion vulnerability in Samsung Open Source Escargot allows Overread Buffers, Input Data Manipulation.
This issue affects Escargot: before 2dee22f5c7b8bf31cb7252d7731fae8c07f2842c. |
| Insufficient validation of untrusted input in Media in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| Cesanta Mongoose before 7.22 contains an out-of-bounds read in the built-in TLS server function mg_tls_server_recv_hello(), which uses an attacker-controlled session_id_len byte from a TLS ClientHello as a buffer index without validating it against the length of received data. A remote, unauthenticated attacker can send a single crafted ClientHello with an oversized session id length to read past the receive buffer, crashing any HTTPS, MQTTS, or WSS service built on MG_TLS_BUILTIN. |
| libssh2 through 1.11.1, fixed in commit a13bb6c, contains a missing bounds check vulnerability that allows a malicious SSH server to trigger an arbitrary-length heap out-of-bounds read and a free of an uninitialized pointer via the publickey subsystem. In libssh2_publickey_list_fetch(), the version 1 response parser reads a server-controlled comment_len value and advances the parse pointer without verifying sufficient bytes remain in the buffer, causing the out-of-bounds read to leak heap pointers from adjacent allocations defeating ASLR, followed by heap allocator state corruption when the error cleanup path frees an uninitialized pointer from a non-zeroed realloc() region. |
| libssh2 through 1.11.1, fixed in commit a2ed82d, contains a pre-authentication integer underflow vulnerability in the ssh2_cipher_crypt() function in src/openssl.c that allows a malicious SSH server to crash any connecting client by negotiating AES-GCM ciphers during handshake. Attackers can exploit the underflow in the expression computing blocksize minus aadlen minus authentication tag length to trigger an out-of-bounds read and a memcpy call with a near-SIZE_MAX length argument, causing immediate process crash before any authentication occurs. |
| FFmpeg versions 0.7.1 through 8.1.2 contain an out-of-bounds read vulnerability in the S/PDIF muxer that allows attackers to access memory beyond buffer boundaries by supplying a crafted DTS stream with a core_size value larger than the actual packet length. Attackers can exploit the missing bounds check in the spdif_header_dts4 function by providing a malicious DTS-HD audio stream during S/PDIF re-muxing to trigger unauthorized memory reads beyond the packet buffer. |
| A flaw was found in libssh. During server-side GSSAPI key exchange, a client-supplied Curve25519 public key shorter than the expected length is copied without proper length validation, leading to an out-of-bounds heap read. This could allow a remote unauthenticated attacker to disclose small amounts of server memory. |
| A heap out-of-bounds read flaw was found in libsoup. When parsing multipart HTTP messages, an integer type mismatch between the caller and soup_headers_parse() can cause the length parameter to be incorrectly truncated, leading to a heap buffer over-read. A remote attacker could use this flaw to crash an application using libsoup or potentially disclose heap memory contents. |
| libde265 is an open source implementation of the h.265 video codec. Prior to version 1.0.19, `decoder_context::decode_slice_unit_tiles` (libde265/decctx.cc:920) reads `pps.CtbAddrRStoTS[ctbAddrRS]` at line 966 where `ctbAddrRS = ctbY * ctbsWidth + ctbX` is computed from PPS-supplied `colBd[]`/`rowBd[]` arrays without validating the result against `CtbAddrRStoTS.size() == sps->PicSizeInCtbsY`. A malformed PPS that passes `set_derived_values` but encodes geometry inconsistent with the SPS produces a `ctbAddrRS` past the allocation, causing a 4-byte heap-buffer-overflow READ. Version 1.0.19 fixes the issue. |
| libde265 is an open source implementation of the h.265 video codec. Versions prior to 1.0.19 have a heap buffer overflow (out-of-bounds READ) exists in `decoder_context::decode_slice_unit_WPP()` in `libde265/decctx.cc`. When decoding a WPP (Wavefront Parallel Processing) HEVC slice, `ctbAddrRS` is computed as `ctbRow * ctbsWidth` inside the entry-point loop. If the PPS/SPS headers are crafted so that this value exceeds `pps.CtbAddrRStoTS.size()`, the subsequent array access `pps.CtbAddrRStoTS[ctbAddrRS]` reads past the end of the allocated vector, triggering a heap-buffer-overflow confirmed by AddressSanitizer. Version 1.0.19 patches the issue. |
| libheif is a HEIF and AVIF file format decoder and encoder. The fix for CVE-2026-3949 (commit `b97c8b5`, PR #1712) introduced an integer overflow in the very security check it added. The check itself can be bypassed, allowing a crafted HEIF file with a VVC track to trigger the same out-of-bounds heap read that CVE-2026-3949 was meant to prevent. This is a separate, currently-unpatched vulnerability. Issue #1712 was closed as fixed without testing the edge case where `size` is near `UINT32_MAX`. Version 1.22.0 patches the issue. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.0, `Track::init_sample_timing_table()` in `libheif/sequences/track.cc` stores an out-of-bounds chunk index (`m_chunks.size()`) into `m_presentation_timeline` when the number of chunks defined in the `stco` box is less than the number of samples in `stsz`. A subsequent call to `heif_track_get_next_raw_sequence_sample()` reads `m_chunks[chunk_idx]` with that OOB index, causing a heap-buffer-overflow. Version 1.22.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: belkin_sa: validate interrupt status length
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
