| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in helper_firmware_cb()
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear mode callbacks after failed mode setup
xfrm_state_gc_task can run long after a failed IPTFS state setup. In the
reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup
returned -ENOMEM before publishing mode_data, and the temporary module
reference from xfrm_get_mode_cbs() was dropped immediately. The dead state
then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been
unloaded.
Clear x->mode_cbs when mode init or clone fails before publishing
mode_data. Those states never installed mode-specific state or the
long-term IPTFS module pin, so deferred GC has nothing mode-specific to
destroy and must not retain a callback table pointer past the temporary
lookup reference.
The buggy scenario involves two paths, with each column showing the order
within that path:
failed setup path:
1. cache x->mode_cbs
2. mode setup fails before mode_data
3. drop the temporary module ref
4. dead state keeps x->mode_cbs cached
GC/unload path:
1. xfrm_state_put() queues GC work
2. xfrm_iptfs unloads later
3. xfrm_state_gc_task runs
4. GC dereferences stale x->mode_cbs
This also covers the failed clone path where clone_state() returns before
publishing mode_data.
Validation reproduced this kernel report:
Kernel panic - not syncing: Fatal exception
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
failslab_stacktrace_filter matched xfrm_iptfs frames
ack_error=-12
FAULT_INJECTION: forcing a failure
BUG: unable to handle page fault
Workqueue: events xfrm_state_gc_task
RIP: xfrm_state_gc_task+0x142/0x650
Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs]
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent user-triggered null deref on QP create
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths. |
| Discourse is an open-source discussion platform. Prior to 2026.1.7, an authenticated user could submit specially formed URLs that bypassed the Onebox allowlist and embedded malicious content in a site. This issue is fixed in versions 2026.1.7, 2026.6.2, 2026.7.1, and 2026.8.0-latest.1. |
| A vulnerability was found in code-projects Task Management System 1.0. This issue affects some unknown processing of the file /user/CommentSave.php. The manipulation of the argument comment/task_id/mineId/recId/myName/myImage results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| A security flaw has been discovered in Handwriting-OCR handwriting-ocr-mcp-server 0.1.0. Affected by this vulnerability is the function fs.readFileSync of the file src/index.ts of the component upload_document. Performing a manipulation of the argument File results in path traversal. Attacking locally is a requirement. The project was informed of the problem early through an issue report but has not responded yet. |
| Discourse is an open-source discussion platform. Prior to 026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, a low-privileged user could place crafted content in the moderation review queue that executed stored cross-site scripting when a moderator viewed it on a site with a modified or disabled default Content Security Policy. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An Expected Behavior Violation [CWE-440] vulnerability in WatchGuard Fireware OS may allow an attacker to bypass the Fireware OS boot time system integrity check and prevent the Firebox from shutting down in the event of a system integrity check failure. The on-demand system integrity check in the Fireware Web UI will correctly show a failed system integrity check message in the event of a failure. |
| An XPath Injection vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to retrieve sensitive information from the Firebox configuration through an exposed authentication or management web interface. This vulnerability only affects Firebox systems that have at least one authentication hotspot configured. |
| Discourse is an open-source discussion platform. Prior to 2026.1.6, the staff action log model rendered unescaped previous and new value fields that could inject stored cross-site scripting into the staff interface. The issue is fixed in 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| A security flaw has been discovered in MingSoft MCMS up to 3.0.6. Affected is an unknown function of the file /mdiy/form/get of the component ms-mdiy. The manipulation results in information disclosure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst
is never initialized because inet6_init() exits before addrconf_init()
is called to initialize it. An attempt to bind an RDS socket to
an ipv6 address results in a crash in __ipv6_chk_addr_and_flags()
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0
Call Trace:
<TASK>
ipv6_chk_addr+0x3b/0x50
rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp]
rds_trans_get_preferred+0x15d/0x2d0 [rds]
? trace_hardirqs_on+0x2d/0x110
rds_bind+0x1433/0x1d60 [rds]
? rds_remove_bound+0xd50/0xd50 [rds]
? aa_af_perm+0x250/0x250
? __might_fault+0xde/0x190
? __sys_bind+0x1dc/0x210
__sys_bind+0x1dc/0x210
? __ia32_sys_socketpair+0x100/0x100
? restore_fpregs_from_fpstate+0x53/0x100
__x64_sys_bind+0x73/0xb0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f47f8269ea9
</TASK>
The following code reproduces the issue:
struct sockaddr_in6 addr;
s = socket(PF_RDS, SOCK_SEQPACKET, 0);
memset(&addr, 0, sizeof(addr));
inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(PORT);
bind(s, &addr, sizeof(addr));
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/intel: Fix out-of-bounds memset in dmar_latency_disable()
dmar_latency_disable() intends to zero out only the single
latency_statistic entry for the given type, but the memset size was
computed as sizeof(*lstat) * DMAR_LATENCY_NUM, which clears the entire
array starting from &lstat[type].
When type > 0, this writes beyond the end of the allocated array,
corrupting adjacent memory.
Fix by using sizeof(*lstat) to clear only the target entry. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Wait for completion instead of returning early in iommu_completion_wait()
need_sync is a per-IOMMU flag shared by all domains and devices behind
that IOMMU. It is set whenever a command is queued with sync == true and
cleared when a completion-wait (CWAIT) command is queued. However, a
cleared need_sync only means that a covering CWAIT has been queued, not
that all previously queued commands have actually completed in hardware.
iommu_completion_wait() read need_sync locklessly and returned early
when it was false. This breaks the "block until all previously queued
commands have completed" contract in a multi-CPU scenario:
CPU2: queue inv-B => need_sync = true
CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N)
CPU2: read need_sync == false => return 0 (no wait!)
CPU2 returns without waiting for any sequence number even though its
inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not
been signaled). CPU2 then proceeds to, for example, free page-table
pages while the IOMMU can still walk stale translations, opening a
use-after-free window. This is a logical race in the meaning of the
flag, not a memory-visibility issue, so barriers alone do not help.
Fix it without losing the optimization of avoiding redundant CWAIT
commands: take iommu->lock before testing need_sync, and when it is
false do not return early but wait for the last allocated sequence
number (cmd_sem_val). Since need_sync == false implies no sync command
was queued after the last CWAIT, that CWAIT is FIFO-ordered after every
not-yet-completed command, so waiting for its sequence number guarantees
all prior commands (possibly queued by another CPU) have completed. The
common path with pending work is unchanged and no extra hardware command
is issued. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix DMA direction for NPU mailbox buffer
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix io_thread race in rxrpc_wake_up_io_thread()
rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but
then reloads the pointer for wake_up_process().
local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so
the second load can see NULL even if the first load did not.
Take a READ_ONCE() snapshot and use it for both the NULL check and the
wake_up_process() call, as rxrpc_encap_rcv() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
