| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS).
In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered.
The memory usage of jdhcpd can be monitored with:
user@host> show system processes extensive | match jdhcpd
This issue affects Junos OS:
* all versions before 22.4R3-S1,
* 23.2 versions before 23.2R2,
* 23.4 versions before 23.4R2. |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on MX Series allows a local, authenticated user with low privileges to execute specific commands which will lead to a complete compromise of managed devices.
Any user logged in, without requiring specific privileges, can issue 'request csds' CLI operational commands. These commands are only meant to be executed by high privileged or users designated for Juniper Device Manager (JDM) / Connected Security Distributed Services (CSDS) operations as they will impact all aspects of the devices managed via the respective MX.
This issue affects Junos OS on MX Series:
* 24.4 releases before 24.4R2-S3,
* 25.2 releases before 25.2R2.
This issue does not affect Junos OS releases before 24.4. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).
If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections.
This issue affects Junos OS on
SRX Series and MX Series:
* all versions before 22.4R3-S9,
* 23.2 version before 23.2R2-S6,
* 23.4 version before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R1-S2, 25.2R2. |
| An Improper Following of a Certificate's Chain of Trust vulnerability in J-Web of Juniper Networks Junos OS on SRX Series allows a PITM to intercept the communication of the device and get access to confidential information and potentially modify it.
When an SRX device is provisioned to connect to Security Director (SD) cloud, it doesn't perform sufficient verification of the received server certificate. This allows a PITM to intercept the communication between the SRX and SD cloud and access credentials and other sensitive information.
This issue affects Junos OS:
* all versions before 22.4R3-S9,
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R1-S2, 25.2R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis control daemon (chassisd) of Juniper Networks Junos OS on SRX1600, SRX2300 and SRX4300 allows a local attacker with low privileges to cause a complete Denial of Service (DoS).
When a specific 'show chassis' CLI command is executed, chassisd crashes and restarts which causes a momentary impact to all traffic until all modules are online again.
This issue affects Junos OS on SRX1600, SRX2300 and SRX4300:
* 24.4 versions before 24.4R1-S3, 24.4R2.
This issue does not affect Junos OS versions before 24.4R1. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis control daemon (chassisd) of Juniper Networks Junos OS on SRX1500, SRX4100, SRX4200 and SRX4600 allows a local attacker with low privileges to cause a complete Denial of Service (DoS).
When a specific 'show chassis' CLI command is executed, chassisd crashes and restarts which causes a momentary impact to all traffic until all modules are online again.
This issue affects Junos OS on SRX1500, SRX4100, SRX4200 and SRX4600:
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2,
* 25.2 versions before 25.2R1-S1, 25.2R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition.
During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart.
This issue cannot be triggered using IPv4 nor other IPv6 traffic.
This issue affects Junos OS on SRX Series:
* all versions before 21.2R3-S10,
* all versions of 21.3,
* from 21.4 before 21.4R3-S12,
* all versions of 22.1,
* from 22.2 before 22.2R3-S8,
* all versions of 22.4,
* from 22.4 before 22.4R3-S9,
* from 23.2 before 23.2R2-S6,
* from 23.4 before 23.4R2-S7,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S3,
* from 25.2 before 25.2R1-S2, 25.2R2. |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information.
A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information.
This issue affects
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S1,
* 25.2 version before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* all versions before 23.2R2-S6-EVO,
* 23.4 version before 23.4R2-S6-EVO,
* 24.2 version before 24.2R2-S4-EVO,
* 24.4 versions before 24.4R2-S1-EVO,
* 25.2 versions before 25.2R2-EVO. |
| An Execution with Unnecessary Privileges vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to gain root privileges, thus compromising the system.
When a configuration that allows unsigned Python op scripts is present on the device, a non-root user is able to execute malicious op scripts as a root-equivalent user, leading to privilege escalation.
This issue affects Junos OS:
* All versions before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R1-S2, 24.2R2,
* from 24.4 before 24.4R1-S2, 24.4R2;
Junos OS Evolved:
* All versions before 22.4R3-S7-EVO,
* from 23.2 before 23.2R2-S4-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-EVO,
* from 24.4 before 24.4R1-S1-EVO, 24.4R2-EVO. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS allows an unauthenticated, network-adjacent attacker sending a specifically malformed ICMP packet to cause an FPC to crash and restart, resulting in a Denial of Service (DoS).
When an ICMP packet is received with a specifically malformed IP header value, the FPC receiving the packet crashes and restarts. Due to the specific type of malformed packet, adjacent upstream routers would not forward the packet, limiting the attack surface to adjacent networks.
This issue only affects ICMPv4. ICMPv6 is not vulnerable to this issue.
This issue does not affect AFT-based line cards such as the MPC10, MPC11, LC4800, LC9600, and MX304.
This issue affects Junos OS:
* all versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S10,
* from 22.2 before 22.2R3-S7,
* from 22.3 before 22.3R3-S4,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R1-S2, 24.2R2. |
| A Key Exchange without Entity Authentication vulnerability in the SSH implementation of Juniper Networks Apstra allows a unauthenticated, MITM
attacker to impersonate managed devices.
Due to insufficient SSH host key validation an attacker can perform a machine-in-the-middle attack on the SSH connections from Apstra to managed devices, enabling an attacker to impersonate a managed device and capture user credentials.
This issue affects all versions of Apstra before 6.1.1. |
| A Weak Password Requirements vulnerability in the password management function of Juniper Networks CTP OS might allow an unauthenticated, network-based attacker to exploit weak passwords of local accounts and potentially take full control of the device.
The password management menu enables the administrator to set password complexity requirements, but these settings are not saved. The issue can be verified with the menu option "Show password requirements". Failure to enforce the intended requirements can lead to weak passwords being used, which significantly increases the likelihood that an attacker can guess these and subsequently attain unauthorized access.
This issue affects CTP OS versions 9.2R1 and 9.2R2. |
| A Use of Default Password vulnerability in the Juniper Networks
Support Insights (JSI)
Virtual Lightweight Collector (vLWC) allows an unauthenticated, network-based attacker to take full control of the device.
vLWC software images ship with an initial password for a high privileged account. A change of this password is not enforced during the provisioning of the software, which can make full access to the system by unauthorized actors possible.This issue affects all versions of vLWC before 3.0.94. |
| A Permissive List of Allowed Input vulnerability in the CLI of Juniper Networks Support Insights (JSI) Virtual Lightweight Collector (vLWC) allows a local, high privileged attacker to escalate their privileges to root.
The CLI menu accepts input without carefully validating it, which allows for shell command injection. These shell commands are executed with root permissions and can be used to gain complete control of the system.
This issue affects all JSI vLWC versions before 3.0.94. |
| A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device.
A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component.
This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device.
On MX platforms with
MPC10, MPC11, LC4800 or LC9600
line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance.
An affected configuration would be:
user@host# show configuration interfaces lo0 | display set
set interfaces lo0 unit 1 family inet filter input <filter-name>
where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI.
The issue can be observed with the CLI command:
user@device> show firewall counter filter <filter_name>
not showing any matches.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R2. |
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Juniper Networks Junos Space allows an attacker to inject script tags in the
list filter field that, when visited by another user, enables the attacker to execute commands with the target's permissions, including an administrator.
This issue affects all versions of Junos Space before 24.1R5 Patch V3. |
| A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS).
When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from.
This issue affects:
Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in line card script processing of Juniper Networks Junos OS allows a local, low-privileged user to install scripts to be executed as root, leading to privilege escalation.
A local user with access to the local file system can copy a script to the router in a way that will be executed as root, as the system boots. Execution of the script as root can lead to privilege escalation, potentially providing the adversary complete control of the system.
This issue only affects specific line cards, such as the MPC10, MPC11, LC4800, LC9600, MX304-LMIC16, SRX4700, and EX9200-15C.
This issue affects Junos OS: * from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S1,
* from 24.4 before 24.4R1-S3, 24.4R2.
This issue does not affect versions prior to 23.1R2. |
