| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap buffer overflow vulnerability in libjxl 0.12.0 via crafted PBM images to the jxl::extras::DecodeImagePNM function in file lib/extras/dec/pnm.cc. |
| Pi.Alert is a WIFI / LAN intruder detector with web service monitoring. Prior to 2026-05-07, Pi.Alert's web-based configuration editor allows arbitrary Python code to be injected into pialert.conf. Since the background scan daemon loads this file via Python's exec(), injected code executes as the daemon process. With web protection disabled (the default configuration), no authentication is required, making this an unauthenticated Remote Code Execution vulnerability. This vulnerability is fixed in 2026-05-07. |
| NewNTUnicodeString does not check for string length overflow. When provided with a string that overflows the maximum size of a NTUnicodeString (a 16-bit number of bytes), it returns a truncated string rather than an error. |
| Netis AC1200 Router NC21 V4.0.1.4296 is vulnerable to unauthenticated command injection via the /cgi-bin/skk_set.cgi endpoint. The password and new_pwd_confirm POST parameters are passed directly to the underlying OS shell without sanitization. An attacker can inject arbitrary shell commands by wrapping them in backticks (`) and encoding them in base64. Because the endpoint requires no authentication, any device on the LAN can achieve full Remote Code Execution on the router's operating system with a single HTTP POST request. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Fix reservation of unaccepted memory table
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix double free in rxe_srq_from_init
In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.
The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.
The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]
Fix this by moving 'srq->rq.queue = q' after copy_to_user. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-battery: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: drop extent cache when splitting extent fails
When the split extent fails, we might leave some extents still being
processed and return an error directly, which will result in stale
extent entries remaining in the extent status tree. So drop all of the
remaining potentially stale extents if the splitting fails. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix memory access flags in helper prototypes
After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: pwm: Fix potential memory leak on init error
When initializing a PWM chip using pwmchip_alloc(), the allocated device
owns an initial reference that must be released on all error paths.
If __pinned_init() were to fail, the allocated pwm_chip would currently
leak because the error path returns without calling pwmchip_put(). |
| Pi.Alert is a WIFI / LAN intruder detector with web service monitoring. Prior to 2026-05-07, Pi.Alert's SaveConfigFile() endpoint writes user-supplied numeric config values (e.g., SMTP_PORT) directly into
pialert.conf without validation. Since pialert.conf is loaded via Python's exec() every 3–5 minutes by the
background cron process, an attacker can inject arbitrary Python code and achieve unauthenticated OS-level RCE. On
default installations (PIALERT_WEB_PROTECTION = False), no credentials are required. This vulnerability is fixed in 2026-05-07. |
| Due to not validating the organization context when executing adaptive authentication flows, the WSO2 Identity Server allows adaptive authentication logic to be triggered on unintended organizations. A malicious actor with privileges to configure adaptive authentication within one organization can leverage this functionality to execute authentication logic on other organizations and sub-organizations.
This flaw allows bypassing authorization boundaries between organizations, leading to unauthorized access to critical operations and user accounts in other organizations. When adaptive authentication is enabled in a multi-organization deployment, a malicious actor with privileges to configure adaptive authentication in one organization could exploit this feature to perform critical operations in other organizations without authorization. This may result in privilege escalation, unauthorized access to resources, and potential account takeover across organizations. |
| Archive::Tar versions before 3.08 for Perl extract hardlinks to attacker controlled paths outside the extraction directory.
_make_special_file() passes the tar header's linkname to link() without validating it against absolute paths or .. segments, creating a hardlink that shares the victim file's inode.
A subsequent write through the extracted name modifies the victim file, and the post-extraction chmod, chown, and utime block in _extract_file() (guarded only against symlinks via -l) applies the tar header's mode, owner, and timestamps to the shared inode during extraction alone. |
| Grav API Plugin is a RESTful API for Grav CMS that provides full headless access to your site's content, media, configuration, users, and system management. Prior to 1.0.0-beta.15, an insecure direct object reference and logic flaw in the Grav API plugin (UsersController::update) allows any authenticated user with basic API access (api.access) to modify their own permission configuration. An attacker can exploit this to escalate their privileges to Super Administrator (admin.super and api.super), leading to full system compromise and potential RCE. This vulnerability is fixed in 1.0.0-beta.15. |
| A Server-Side Request Forgery (SSRF) vulnerability exists in MLflow versions prior to 3.9.0. The `_create_webhook()` function in `mlflow/server/handlers.py` accepts a user-controlled `url` parameter without validation, and the `_send_webhook_request()` function in `mlflow/webhooks/delivery.py` sends HTTP POST requests to this attacker-controlled URL. This allows an authenticated attacker to force the MLflow backend to send HTTP requests to internal services, cloud metadata endpoints, or arbitrary external servers. The lack of input sanitization, URL scheme filtering, or allowlist validation on the webhook URL enables exploitation, potentially leading to cloud credential theft, internal network access, and data exfiltration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix oops when split header is enabled
For GMAC4, when split header is enabled, in some rare cases, the
hardware does not fill buf2 of the first descriptor with payload.
Thus we cannot assume buf2 is always fully filled if it is not
the last descriptor. Otherwise, the length of buf2 of the second
descriptor will be calculated wrong and cause an oops:
Unable to handle kernel paging request at virtual address ffff00019246bfc0
...
x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000
Call trace:
dcache_inval_poc+0x28/0x58 (P)
dma_direct_sync_single_for_cpu+0x38/0x6c
__dma_sync_single_for_cpu+0x34/0x6c
stmmac_napi_poll_rx+0x8f0/0xb60
__napi_poll.constprop.0+0x30/0x144
net_rx_action+0x160/0x274
handle_softirqs+0x1b8/0x1fc
...
To fix this, the PL bit-field in RDES3 register is used for all
descriptors, whether it is the last descriptor or not. |
