| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix krb5 mount with username option
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
``` |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter] |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler
The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in
bnxt_async_event_process() uses a firmware-supplied 'type' field
directly as an index into bp->bs_trace[] without bounds validation.
The 'type' field is a 16-bit value extracted from DMA-mapped completion
ring memory that the NIC writes directly to host RAM. A malicious or
compromised NIC can supply any value from 0 to 65535, causing an
out-of-bounds access into kernel heap memory.
The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte
and writes to bs_trace->last_offset and bs_trace->wrapped, leading to
kernel memory corruption or a crash.
Fix by adding a bounds check and defining BNXT_TRACE_MAX as
DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently
defined firmware trace types (0x0 through 0xc). |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix use-after-free access to PTP clock
PTP clock is registered on every opening of the interface and destroyed on
every closing. However it may be accessed via get_ts_info ethtool call
which is possible while the interface is just present in the kernel.
BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
Read of size 4 at addr ffff8880194345cc by task syz.0.6/948
CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x17f/0x496 mm/kasan/report.c:420
kasan_report+0xd9/0x180 mm/kasan/report.c:524
ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349
macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371
__ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558
ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline]
__dev_ethtool net/ethtool/ioctl.c:3017 [inline]
dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 457:
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:699 [inline]
ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235
gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375
macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920
__dev_open+0x2ce/0x500 net/core/dev.c:1501
__dev_change_flags+0x56a/0x740 net/core/dev.c:8651
dev_change_flags+0x92/0x170 net/core/dev.c:8722
do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833
__rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608
rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655
rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150
netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x14b/0x180 net/socket.c:730
__sys_sendto+0x320/0x3b0 net/socket.c:2152
__do_sys_sendto net/socket.c:2164 [inline]
__se_sys_sendto net/socket.c:2160 [inline]
__x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 938:
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1729 [inline]
slab_free_freelist_hook mm/slub.c:1755 [inline]
slab_free mm/slub.c:3687 [inline]
__kmem_cache_free+0xbc/0x320 mm/slub.c:3700
device_release+0xa0/0x240 drivers/base/core.c:2507
kobject_cleanup lib/kobject.c:681 [inline]
kobject_release lib/kobject.c:712 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1cd/0x350 lib/kobject.c:729
put_device+0x1b/0x30 drivers/base/core.c:3805
ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391
gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404
macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966
__dev_close_many+0x1b9/0x310 net/core/dev.c:1585
__dev_close net/core/dev.c:1597 [inline]
__dev_change_flags+0x2bb/0x740 net/core/dev.c:8649
dev_change_fl
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd()
move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge
zero pages. For the huge zero page path, src_folio is explicitly set to
NULL, and is used as a sentinel to skip folio operations like lock and
rmap.
In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL,
pgprot) passes NULL through folio_pfn() and page_to_pfn(). With
SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD
pointing to non-existent physical memory. On other memory models it is a
NULL dereference.
Use page_folio(src_page) to obtain the valid huge zero folio from the
page, which was obtained from pmd_page() and remains valid throughout.
After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge
zero folio special"), moved huge zero PMDs must remain special so
vm_normal_page_pmd() continues to treat them as special mappings.
move_pages_huge_pmd() currently reconstructs the destination PMD in the
huge zero page branch, which drops PMD state such as pmd_special() on
architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result,
vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page
and corrupt its refcount.
Instead of reconstructing the PMD from the folio, derive the destination
entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD
metadata the same way move_huge_pmd() does for moved entries by marking it
soft-dirty and clearing uffd-wp. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix incorrect pte restoration for lazyfree folios
We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the
batch has a mix of writable and non-writable bits, we may end up setting
the entire batch writable. Fix this by respecting writable bit during
batching.
Although on a successful unmap of a lazyfree folio, the soft-dirty bit is
lost, preserve it on pte restoration by respecting the bit during
batching, to make the fix consistent w.r.t both writable bit and
soft-dirty bit.
I was able to write the below reproducer and crash the kernel.
Explanation of reproducer (set 64K mTHP to always):
Fault in a 64K large folio. Split the VMA at mid-point with
MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes
and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that
folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do
MADV_FREE on the range to mark the folio as lazyfree. Write to the memory
to dirty the pte, eventually rmap will dirty the folio. Then trigger
reclaim, we will hit the pte restoration path, and the kernel will crash
with the trace given below.
The BUG happens at:
BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw);
The code path is asking for anonymous page to be mapped writable into the
pagetable. The BUG_ON() firing implies that such a writable page has been
mapped into the pagetables of more than one process, which breaks
anonymous memory/CoW semantics.
[ 21.134473] kernel BUG at mm/page_table_check.c:118!
[ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 21.135917] Modules linked in:
[ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT
[ 21.136858] Hardware name: linux,dummy-virt (DT)
[ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 21.137308] pc : page_table_check_set+0x28c/0x2a8
[ 21.137607] lr : page_table_check_set+0x134/0x2a8
[ 21.137885] sp : ffff80008a3b3340
[ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000
[ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001
[ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30
[ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000
[ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff
[ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020
[ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0
[ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff
[ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002
[ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0
[ 21.141991] Call trace:
[ 21.142093] page_table_check_set+0x28c/0x2a8 (P)
[ 21.142265] __page_table_check_ptes_set+0x144/0x1e8
[ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8
[ 21.142766] contpte_set_ptes+0xe8/0x140
[ 21.142907] try_to_unmap_one+0x10c4/0x10d0
[ 21.143177] rmap_walk_anon+0x100/0x250
[ 21.143315] try_to_unmap+0xa0/0xc8
[ 21.143441] shrink_folio_list+0x59c/0x18a8
[ 21.143759] shrink_lruvec+0x664/0xbf0
[ 21.144043] shrink_node+0x218/0x878
[ 21.144285] __node_reclaim.constprop.0+0x98/0x338
[ 21.144763] user_proactive_reclaim+0x2a4/0x340
[ 21.145056] reclaim_store+0x3c/0x60
[ 21.145216] dev_attr_store+0x20/0x40
[ 21.145585] sysfs_kf_write+0x84/0xa8
[ 21.145835] kernfs_fop_write_iter+0x130/0x1c8
[ 21.145994] vfs_write+0x2b8/0x368
[ 21.146119] ksys_write+0x70/0x110
[ 21.146240] __arm64_sys_write+0x24/0x38
[ 21.146380] invoke_syscall+0x50/0x120
[ 21.146513] el0_svc_common.constprop.0+0x48/0xf8
[ 21.146679] do_el0_svc+0x28/0x40
[ 21.146798] el0_svc+0x34/0x110
[ 21.146926] el0t
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/bus: Fix potential use after free in asynchronous initialization
Dingisoul with KASAN reports a use after free if device_add() fails in
nd_async_device_register().
Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while
scheduling async init") correctly added a reference on the parent device
to be held until asynchronous initialization was complete. However, if
device_add() results in an allocation failure the ref count of the
device drops to 0 prior to the parent pointer being accessed. Thus
resulting in use after free.
The bug bot AI correctly identified the fix. Save a reference to the
parent pointer to be used to drop the parent reference regardless of the
outcome of device_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix cache_request leak in cache_release
When a reader's file descriptor is closed while in the middle of reading
a cache_request (rp->offset != 0), cache_release() decrements the
request's readers count but never checks whether it should free the
request.
In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the
cache_request is removed from the queue and freed along with its buffer
and cache_head reference. cache_release() lacks this cleanup.
The only other path that frees requests with readers == 0 is
cache_dequeue(), but it runs only when CACHE_PENDING transitions from
set to clear. If that transition already happened while readers was
still non-zero, cache_dequeue() will have skipped the request, and no
subsequent call will clean it up.
Add the same cleanup logic from cache_read() to cache_release(): after
decrementing readers, check if it reached 0 with CACHE_PENDING clear,
and if so, dequeue and free the cache_request. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: prevent buffer overflow in hid_hw_request
right now the returned value is considered to be always valid. However,
when playing with HID-BPF, the return value can be arbitrary big,
because it's the return value of dispatch_hid_bpf_raw_requests(), which
calls the struct_ops and we have no guarantees that the value makes
sense. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd
The /proc/fs/nfs/exports proc entry is created at module init
and persists for the module's lifetime. exports_proc_open()
captures the caller's current network namespace and stores
its svc_export_cache in seq->private, but takes no reference
on the namespace. If the namespace is subsequently torn down
(e.g. container destruction after the opener does setns() to a
different namespace), nfsd_net_exit() calls nfsd_export_shutdown()
which frees the cache. Subsequent reads on the still-open fd
dereference the freed cache_detail, walking a freed hash table.
Hold a reference on the struct net for the lifetime of the open
file descriptor. This prevents nfsd_net_exit() from running --
and thus prevents nfsd_export_shutdown() from freeing the cache
-- while any exports fd is open. cache_detail already stores
its net pointer (cd->net, set by cache_create_net()), so
exports_release() can retrieve it without additional per-file
storage. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Defer sub-object cleanup in export put callbacks
svc_export_put() calls path_put() and auth_domain_put() immediately
when the last reference drops, before the RCU grace period. RCU
readers in e_show() and c_show() access both ex_path (via
seq_path/d_path) and ex_client->name (via seq_escape) without
holding a reference. If cache_clean removes the entry and drops the
last reference concurrently, the sub-objects are freed while still
in use, producing a NULL pointer dereference in d_path.
Commit 2530766492ec ("nfsd: fix UAF when access ex_uuid or
ex_stats") moved kfree of ex_uuid and ex_stats into the
call_rcu callback, but left path_put() and auth_domain_put() running
before the grace period because both may sleep and call_rcu
callbacks execute in softirq context.
Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers the
callback until after the RCU grace period and executes it in process
context where sleeping is permitted. This allows path_put() and
auth_domain_put() to be moved into the deferred callback alongside
the other resource releases. Apply the same fix to expkey_put(),
which has the identical pattern with ek_path and ek_client.
A dedicated workqueue scopes the shutdown drain to only NFSD
export release work items; flushing the shared
system_unbound_wq would stall on unrelated work from other
subsystems. nfsd_export_shutdown() uses rcu_barrier() followed
by flush_workqueue() to ensure all deferred release callbacks
complete before the export caches are destroyed.
Reviwed-by: Jeff Layton <jlayton@kernel.org> |
| FastMCP is the standard framework for building MCP applications. Prior to version 3.2.0, server names containing shell metacharacters (e.g., &) can cause command injection on Windows when passed to fastmcp install claude-code or fastmcp install gemini-cli. These install paths use subprocess.run() with a list argument, but on Windows the target CLIs often resolve to .cmd wrappers that are executed through cmd.exe, which interprets metacharacters in the flattened command string. This issue has been patched in version 3.2.0. |
| FastMCP is the standard framework for building MCP applications. Prior to version 3.2.0, while testing the GitHubProvider OAuth integration, which allows authentication to a FastMCP MCP server via a FastMCP OAuthProxy using GitHub OAuth, it was discovered that the FastMCP OAuthProxy does not properly validate the user's consent upon receiving the authorization code from GitHub. In combination with GitHub’s behavior of skipping the consent page for previously authorized clients, this introduces a Confused Deputy vulnerability. This issue has been patched in version 3.2.0. |
| Juju is an open source application orchestration engine that enables any application operation on any infrastructure at any scale through special operators called ‘charms’. From versions 2.9 to before 2.9.56 and 3.6 to before 3.6.19, it is possible that a compromised workload machine under a Juju controller can read any log file for any entity in any model at any level. This issue has been patched in versions 2.9.56 and 3.6.19. |
| Juju is an open source application orchestration engine that enables any application operation on any infrastructure at any scale through special operators called ‘charms’. From versions 2.9 to before 2.9.56 and 3.6 to before 3.6.19, any authenticated user, machine or controller under a Juju controller can modify the resources of an application within the entire controller. This issue has been patched in versions 2.9.56 and 3.6.19. |
| A security vulnerability has been detected in mixelpixx Google-Research-MCP 1e062d7bd887bfe5f6e582b6cc288bb897b35cf2/ca613b736ab787bc926932f59cddc69457185a83. This issue affects the function extractContent of the file src/services/content-extractor.service.ts of the component Model Context Protocol Handler. The manipulation of the argument URL leads to server-side request forgery. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| Budibase is an open-source low-code platform. Prior to version 3.23.25, a business logic vulnerability exists in Budibase’s password reset functionality due to the absence of rate limiting, CAPTCHA, or abuse prevention mechanisms on the “Forgot Password” endpoint. An unauthenticated attacker can repeatedly trigger password reset requests for the same email address, resulting in hundreds of password reset emails being sent in a short time window. This enables large-scale email flooding, user harassment, denial of service (DoS) against user inboxes, and potential financial and reputational impact for Budibase. This issue has been patched in version 3.23.25. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.16 and prior, the RSS notifier allows .. path traversal in notify-recipient-uri (e.g., rss:///../job.cache), letting a remote IPP client write RSS XML bytes outside CacheDir/rss (anywhere that is lp-writable). In particular, because CacheDir is group-writable by default (typically root:lp and mode 0770), the notifier (running as lp) can replace root-managed state files via temp-file + rename(). This PoC clobbers CacheDir/job.cache with RSS XML, and after restarting cupsd the scheduler fails to parse the job cache and previously queued jobs disappear. At time of publication, there are no publicly available patches. |
