| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/xe_pagefault: Disallow writes to read-only VMAs
The page fault handler should reject write/atomic access to read only
VMAs. Add code to handle this in xe_pagefault_service after the VMA
lookup.
v2:
- Apply max line length (Matthew)
(cherry picked from commit 714ee6754ac5fa3dc078856a196a6b124cd797a0) |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB. |
| An issue in fohrloop dash-uploader v.0.1.0 through v.0.7.0a2 allows a remote attacker to execute arbitrary code via the dash_uploader/httprequesthandler.py, dash_uploader/upload.py in the Upload function and max_file_size parameter, dash_uploader/configure_upload.py components |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: ensure sb->s_fs_info is always cleaned up
When hfsplus was converted to the new mount api a bug was introduced by
changing the allocation pattern of sb->s_fs_info. If setup_bdev_super()
fails after a new superblock has been allocated by sget_fc(), but before
hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info
data it was leaked.
Fix this by freeing sb->s_fs_info in hfsplus_kill_super(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: Add missing unmap in snd_cx23885_hw_params()
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| ProSoft Technology ICX35-HWC version 1.3 and prior cellular gateways contain an authentication bypass vulnerability in the web user interface that allows unauthenticated attackers to gain access to administrative functions without valid credentials. Attackers can bypass the authentication mechanism in affected firmware versions to obtain full administrative access to device configuration and settings. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix post open error handling
Closing a queue doesn't guarantee that all associated page pools are
terminated right away, let the refcounting do the work instead of
releasing the zcrx ctx directly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate release report content before using for RTL8922DE
The commit 957eda596c76
("wifi: rtw89: pci: validate sequence number of TX release report")
does validation on existing chips, which somehow a release report of SKB
becomes malformed. As no clear cause found, add rules ahead for RTL8922DE
to avoid crash if it happens. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix incorrect early exits for invalid metabox-enabled images
Crafted EROFS images with metadata compression enabled can trigger
incorrect early returns, leading to folio reference leaks.
However, this does not cause system crashes or other severe issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Fix potential unregister of netdev that has not been registered yet
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return. |
| The ZTE ZXEDM iEMS product has a password reset vulnerability for any user.Because the management of the cloud EMS portal does not properly control access to the user list acquisition function, attackers can read all user list information through the user list interface. Attackers can reset the passwords of obtained user information, causing risks such as unauthorized operations. |
| In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: prevent races in ->query_interfaces()
It was possible for two query interface works to be concurrently trying
to update the interfaces.
Prevent this by checking and updating iface_last_update under
iface_lock. |
| In versions 2.1.63 through 2.1.83 of Claude Code, the folder trust determination logic used the git worktree commondir file without validating its contents. An attacker could craft a malicious repository with a commondir file pointing to a path the victim had previously trusted, causing Claude Code to bypass its trust confirmation dialog and immediately execute hooks defined in `.claude/settings.json`. Exploitation requires the victim to clone the malicious repository and run Claude Code within it, and the attacker must know or guess a path the victim had already trusted. This issue has been fixed in version 2.1.84. |
