| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A type mismatch vulnerability was found in QEMU's vhost inflight migration VMState handling. The destination buffer size is stored as a uint64_t but read by the VMS_VBUFFER load path as a signed int32_t. On little-endian hosts, a crafted incoming migration state with bit 31 set causes the value to be interpreted as negative and then implicitly converted to a very large size_t, leading qemu_get_buffer() to copy migration-stream data beyond the bounds of the mmap-backed inflight region.
This can result in a crash of the QEMU process or memory corruption. Exploitation requires control of the migration producer or write access to the migration channel, combined with a destination configured to use vhost inflight migration. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| Date::Manip versions through 6.99 for Perl return corrupted dates via non-ASCII decimal digits that pass the numeric range tests in check.
The parse regexes capture year, month and day with the `\d` shorthand, which on a character string matches the whole Unicode decimal digit property `\p{Nd}` and not just `[0-9]`. Date::Manip::Base::check then validates the captured fields with numeric comparisons alone (`$y<1 || $y>9999`, `$m<1 || $m>12`, `$d<1 || $d>$days`), and _parse_check stores the numified fields (`$y+0`). Perl truncates a string at the first character that is not an ASCII digit, so a field whose leading characters are ASCII digits numifies to an in-range prefix and satisfies every test: a year field of three ASCII digits followed by U+0664 ARABIC-INDIC DIGIT FOUR numifies to 202, giving the year 0202, and one non-ASCII digit in the month or day field shifts those fields the same way. The hour, minute and second fields match explicit ASCII character classes (`0?[0-9]`, `[0-5][0-9]`) and do not shift, though a non-ASCII digit in a fractional hour or minute field truncates the fraction.
Any caller that passes an untrusted character string to ParseDate() or Date::Manip::Date->parse() can get back a date that differs from the string it parsed, with no parse error. Where the parsed date gates logic such as an expiry check or a retention window, the shift goes unnoticed. |
| GoAccess is a real-time web log analyzer and interactive viewer that runs in a terminal in *nix systems or through the browser. Prior to version 1.11, the built-in WebSocket server narrows a 64-bit extended frame length into the signed 32-bit WSFrame.payloadlen field before enforcing the maximum frame size, allowing an unauthenticated remote client to bypass the guard and force an approximately 18-exabyte allocation request that terminates the process. This issue is fixed in version 1.11. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
Include linux/bitfield.h for FIELD_GET().
Create new macros for bit manipulation in combination with manual bit
manipulation being replaced with FIELD_GET().
The current variable declaration and initializations are barely readable
and use comma separations across multiple lines. Refactor the
initializations so that mantissa and exp have separate declarations and
sign gets initialized later.
In addition (and due to the nature of the cleanup), fix a sign-extension
bug where, float32 would get bitwise anded with ~BIT(31)
(which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent. |
| In the Linux kernel, the following vulnerability has been resolved:
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.
Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input. The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.
All checks of the input value should be applied to the original variable
call_pkg->nd_family.
[iweiny: update commit message] |
| Heap-based buffer overflow in Microsoft Office PowerPoint allows an unauthorized attacker to execute code locally. |
| Incorrect conversion between numeric types in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| containerd is an open-source container runtime. In versions prior to 1.7.32, 2.0.9, 2.2.4 and 2.3.1, containers launched with a numeric User directive that cannot be parsed as a 32-bit integer are incorrectly treated as a username, leading to runAsNonRoot evasion. If a crafted image provides an /etc/passwd file mapping this large numeric string to root, the container ultimately runs as root (UID 0). This allows the Kubernetes runAsNonRoot restriction to be bypassed, causing unexpected behavior for environments that require containers to run as a non-root user. This issue has been fixed in versions 1.7.32, 2.0.9, 2.2.4 and 2.3.1. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-51 and 7.1.2-26, an integer overflow in the XCF decoder can result in an out of bounds read when a crafted image is read, potentially resulting in a crash. This issue has been fixed in versions 6.9.13-51 and 7.1.2-26. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix truncation for block sizes >= 4G
When the iommu is used the linearization of the mapping can give a single
block that is very large split across multiple SG entries.
When __rdma_block_iter_next() reassembles the split SG entries it is
overflowing the 32 bit stack values and computed the wrong DMA addresses
for blocks after the truncation.
Use the right types to hold DMA addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Zero-extend bpf prog return values and kfunc arguments
s390x ABI requires callers to zero-extend unsigned arguments and
sign-extend signed arguments, and callees to zero-extend unsigned
return values and sign-extend signed return values.
s390 BPF JIT currently implements only sign extension. Fix this
omission and implement zero extension too. |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Incorrect Conversion between Numeric Types due to handling negative exponents in ext/jsbn2.js. An attacker can force the computation of incorrect modular inverses and break signature verification by calling modPow with a negative exponent. |
| vLLM is an inference and serving engine for large language models (LLMs). From 0.5.5 until 0.23.1rc0, integer truncation of tensor dimensions in vLLM's GGUF dequantize kernels (csrc/quantization/gguf/gguf_kernel.cu) causes partial tensor processing. The output tensor is allocated at full size via torch::empty (uninitialized memory), but the dequantize CUDA kernel processes only a truncated number of elements. The unfilled portion of the output tensor retains whatever was previously in GPU memory. In multi-tenant inference deployments, this residual GPU memory may contain tensor data from other users' inference requests, constituting information disclosure. This vulnerability is fixed in 0.23.1rc0. |
| There is an incorrect conversion between numeric types vulnerability in NI grpc-device due to missing range checks in CodeGen. This may silently discard high bits if a size value exceeded the target type's range. This affects NI grpc-device 2.17.0 and prior versions. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memfd_luo: fix physical address conversion in put_folios cleanup
In memfd_luo_retrieve_folios()'s put_folios cleanup path:
1. kho_restore_folio() expects a phys_addr_t (physical address) but
receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to
check the wrong physical address (pfn << PAGE_SHIFT instead of the
actual physical address).
2. This loop lacks the !pfolio->pfn check that exists in the main
retrieval loop and memfd_luo_discard_folios(), which could
incorrectly process sparse file holes where pfn=0.
Fix by converting PFN to physical address with PFN_PHYS() and adding
the !pfolio->pfn check, matching the pattern used elsewhere in this file.
This issue was identified by the AI review.
https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker could cause an incorrect conversion between numeric types, leading to a heap buffer overflow. A successful exploit of this vulnerability might lead to denial of service, escalation of privileges, information disclosure, data tampering, and code execution. |
