| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| rsync before 3.5.0 contains an algorithmic complexity vulnerability in the hash_search() function that allows a remote attacker to cause a denial of service by delivering a carefully constructed file list. A sender can exploit the quadratic-time worst-case behavior in hash lookups to exhaust receiver CPU resources with a modest number of crafted entries, causing a sustained denial of service. |
| @hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.0.10, a WebSocket upgrade request to an upgradeWebSocket route with a missing or malformed Sec-WebSocket-Key header causes src/websocket.ts to retain the request's IncomingMessage in waiterMap and leave waitForWebSocket pending because ws.handleUpgrade emits no connection event. The aborted handshake therefore has no cleanup path, allowing an unauthenticated attacker to flood a public route, cause unbounded memory growth, and eventually make the service unavailable. This issue is fixed in version 2.0.10. |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.21, node-tar's filesFilter in src/list.ts uses the recursive mapHas helper to walk an archive entry path upward with path.dirname() and no segment cap when tar.t(...) or tar.x(...) receives a non-empty member-selection list. A crafted GNU L or PAX x long-path header with thousands of slash-separated segments reaches this.filter(entry.path, entry) in Parser[CONSUMEHEADER] in src/parse.ts before Unpack[CHECKPATH] applies maxDepth, causing an uncatchable RangeError stack overflow that terminates asynchronous and streaming Node.js consumers. This issue is fixed in version 7.5.21. |
| py-libp2p is the Python implementation of the libp2p networking stack. In 0.7.0 and earlier, the yamux handle_incoming() method in libp2p/stream_muxer/yamux/yamux.py reads an attacker-controlled 32-bit DATA frame length with read_exactly() before validating it against MAX_WINDOW_SIZE or checking whether stream_id exists. A peer that completes the standard Noise handshake can send a 12-byte frame declaring a 0xFFFFFFFF body and then withhold the body, causing the sequential yamux read loop used by the default new_host() configuration to block and preventing every stream on that connection from making progress. No fixed version is available as of this review. |
| Hub is a Node.js WebSocket server and client with added features. Prior to 0.2.16, every incoming unauthenticated WebSocket connection triggers loadDefaultConnectionEventListeners to call requestClientId, which calls rpc.send for the get-client-id action and pushes a request into RPC.requests. The RPC.waitForReply function starts a setInterval polling loop every 10 milliseconds that is cleared only after a matching reply; if the client remains silent and closes, the timer and pending request stay allocated because the socket close path does not cancel them. Repeated connections therefore cause unbounded timers and heap entries, exhausting CPU and memory and making the server unavailable. This issue is fixed in version 0.2.16. |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. |
| Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte buffer using index-based backtracking for '..' segments, eliminating the quadratic time complexity and significantly reducing memory allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| A flaw in Elasticsearch allows a low-privileged authenticated user who can index documents to submit a single small document containing a crafted user-supplied input. Processing one such document occupies a worker thread from a bounded pool for a disproportionate amount of time, degrading the availability of indexing operations on the affected node. |
| Inefficient Algorithmic Complexity (CWE-407) in Kibana can lead to denial of service via Input Data Manipulation (CAPEC-153). A specially crafted, deeply nested expression submitted to a Kibana TSVB visualization is evaluated with a worst-case cost that grows disproportionately with the size of the input. Because the evaluation runs synchronously, a single request consumes the Kibana request-processing thread indefinitely, and Kibana stops responding to all further requests until the service is restarted. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to resource exhaustion. |
| A vulnerability has been found in Calix GigaSpire 26.1.0. The affected element is an unknown function of the file traceroute.cmd. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| js-yaml is a JavaScript YAML parser and dumper. From 5.0.0 until 5.2.2, parsing a small YAML document can take exponential time when an application calls load() or loadAll() on untrusted input. In src/parser/parser.ts, readFlowCollection uses restoreState and calls parseNode a second time when a flow-sequence entry is recognized as a key: value pair. If the key is a nested flow sequence of the same shape, every level is parsed twice, causing O(2^n) work and allowing an input under 200 bytes to keep one CPU busy for minutes, block the Node.js event loop, and stall the process. No anchors, aliases, merges, tags, or nondefault options are required. This issue is fixed in version 5.2.2. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| A weakness has been identified in Almico Speedfan 4.52. This affects the function KiSystemCall64 in the library speedfan.sys of the component MSR Index Handler. Executing a manipulation can lead to memory leak. The attack can only be executed locally. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| ParseAcceptLanguage quadratic-time DoS via Locale middleware on unauthenticated requests |
| A flaw has been found in Calix GigaSpire 26.1.0. Impacted is an unknown function of the file utilities_configurationsave.cgi of the component Web Management Interface. Executing a manipulation of the argument sessionKey can lead to denial of service. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
