| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| IBM Concert 1.0.0 through 3.0.0 is vulnerable to improper access control which allows unauthorized modification of application files. |
| When a process calls execve(2) to execute a setuid or setgid image, hwpmc(4) is supposed to detach PMCs owned by unprivileged processes. An inverted check meant that this scenario was not handled properly.
An unprivileged local user who has attached PMCs to a process can continue monitoring it after the process executes a setuid or setgid binary, contrary to the intended policy. |
| A container privilege escalation flaw was found in certain Ansible Automation Platform images. This issue arises from the /etc/passwd file being created with group-writable permissions during the build process. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This vulnerability allows an attacker to add a new user with any arbitrary UID, including UID 0, gaining full root privileges within the container. |
| A flaw was found in Podman. If an attacker can pass a crafted tar archive to the `podman load` command, they can create files on the host machine with the privileges of the user running Podman. |
| A vulnerability in Hugging Face Transformers (versions 4.57.0 to 5.16.1) allows remote Python files to be written to local disk without user consent when using GenerativePreTrainedModel.load_custom_generate(). The function fetches and caches a remote module file before performing the required trust_remote_code consent check, inverting the security model enforced by other code-loading paths (such as AutoConfig, AutoModel, and AutoTokenizer). As a result, attacker‑controlled Python code from custom_generate/generate.py is copied into the user’s ~/.cache/huggingface/modules directory even if the user declines the trust prompt. Although execution is correctly gated, the file write is not reversible and can persist across sessions. This can lead to persistent, unauthorized files on disk and stale cache collisions where cached attacker code may later be executed during trusted model loads. The issue stems from an unconditional file write in dynamic_module_utils.py prior to any trust verification. |
| uutils coreutils versions before 0.10.0 apply setuid or setgid mode to install destinations before finalizing ownership changes, allowing privileged users to leave setuid executables owned by the privileged invoker when ownership changes fail. Attackers can execute leftover setuid files with elevated privileges when ownership change operations fail on capability-restricted systems. |
| Dell Command | Intel vPro Out of Band, versions prior to 4.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure. |
| Dell Command | Integration Suite for System Center, versions prior to 6.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure. |
| Incorrect default permissions in the installation directory of WatchDog Anti-Virus on Windows allow local, low-privileged users to modify, replace, or delete antivirus binaries and configuration files, because the installer grants the Users group Full Control over C:\Program Files (x86)\Watchdog Anti-Virus. This may disable antivirus protection or enable privileged code execution if modified binaries are loaded by an elevated WatchDog process. |
| In Eclipse Ankaios versions 0.1.0 through 1.0.2, the agent creates workload files and Control Interface named pipes (FIFOs) under a predictable path derived from the agent name and a hash of the workload's runtime configuration. If a directory or FIFO already exists at that path when the agent (re)starts, the agent reuses it based only on an existence and/or file-type check, without validating its owner or permissions. A local, unprivileged user with write access to the same base directory (by default under `$TMPDIR/ankaios`, e.g. shared `/tmp`) can pre-create this path hierarchy, including the two Control Interface FIFOs, before the agent starts. The agent then treats the attacker-owned FIFOs as the legitimate Control Interface for the targeted workload. The attacker can complete the Control Interface handshake and issue requests using that workload's configured `controlInterfaceAccess` permissions, allowing impersonation of the workload and, depending on its configured permissions, unauthorized reading and/or modification of the cluster's desired state. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix call to hardware monitoring event handler
The first parameter of hwmon_notify_event() is supposed to be the hardware
monitoring device. The bnxt driver calls it with the platform device as
first parameter instead. This API break results in undefined behavior and
may result in a crash.
Pass the hardware monitoring device as parameter instead to fix the
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction. |
| The go-getter library up to versions 1.8.8 and 2.2.3 is vulnerable to a privilege escalation issue in its archive decompression handling that may allow a crafted archive to cause extracted files to be created with elevated permission bits. Where extraction is performed by a privileged user, this may allow a local actor to obtain the privileges of the extracting process. This vulnerability (CVE-2026-88922) is fixed in go-getter 1.8.9 and 2.2.4. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: replace forgeable discard filler with a keyed sector marker
The discard-block check in dm_integrity_rw_tag() treats a stored tag
of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and
skips HMAC verification. allow_discards is only accepted in
dm-integrity's standalone mode. An attacker with raw write access to
the backing device, but without the integrity key, can stamp any block
with an all-0xf6 tag and have it served as authentic.
Add a new "allow_discards_keyed" target argument that marks discarded
blocks with a keyed checksum of (salt || sector) instead, computed by
integrity_discard_checksum(). |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. |
| Dell Repository Manager, versions prior to 3.5.2, contains an Incorrect Default Permissions vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Nextflow is a DSL for data-driven computational pipelines. From 25.09.2-edge until 25.10.6 and 26.04.3, nextflow auth login writes Seqera Platform OIDC bearer tokens to ${NXF_HOME:-~/.nextflow}/seqera-auth.config through AuthCommandImpl.writeConfig in plugins/nf-tower/src/main/io/seqera/tower/plugin/auth/AuthCommandImpl.groovy without setting restrictive file permissions, allowing the default umask 022 to create the file with mode 0644. On a multi-user POSIX host, a local user who can traverse the victim's home directory can read seqera-auth.config and impersonate the victim against Seqera Platform within the token's scope. Single-user systems and headless CI runners that do not use the interactive login flow are not affected. This issue is fixed in 25.10.6 and 26.04.3. |
| Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. In Strimzi 1.0.0 and earlier, deploying only the Topic Operator or only the User Operator through the Kafka custom resource leaves the Entity Operator ServiceAccount with RBAC permissions for both components. The excess permissions can allow access to KafkaUser custom resources and Secrets when the User Operator is absent, or access to KafkaTopic custom resources when the Topic Operator is absent. This issue is fixed in versions 1.0.1 and 1.1.0. |
| A flaw was found in firewalld. A local unprivileged user can exploit this vulnerability by mis-authorizing two runtime D-Bus (Desktop Bus) setters, setZoneSettings2 and setPolicySettings. This mis-authorization allows the user to modify the runtime firewall state without proper authentication, leading to unauthorized changes in network security configurations. |
