| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Windows installer deployed Npcap leaving its access restriction option at the insecure default value, so the driver was accessible to every local user of the host instead of being restricted to administrators only. A local user without administrative privileges could use the Npcap driver to capture the traffic reaching the host, which discloses information belonging both to the host and to other systems on the same network segment, and to send arbitrary raw packets on that segment. |
| Improper isolation of shared resources within the CPU operation cache on Zen 2-based products could allow an attacker to corrupt instructions executed at a different privilege level, potentially resulting in privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/rtp: Add RING_FORCE_TO_NONPRIV_DENY to OA whitelists
Unconditionally whitelisting OA registers is a security violation. Set
RING_FORCE_TO_NONPRIV_DENY bit in OA nonpriv slots, so that OA registers
don't get whitelisted by default after probe, gt reset, resume and engine
reset.
(cherry picked from commit 90511bdcfda97211c01f1d945d4ea616578d8fca) |
| A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or applying the relevant stable backports (v5.4.233, v5.10.170, v5.15.96, v6.1.14). |
| Sharp and Toshiba Tec MFPs (multifunction printers) for a certain market have been shipped with the user authentication feature disabled in the initial configuration. When used with the initial configuration, the address book editing and a range of features related to Document Filing can be accessed without user authentication.
Products intended for the Japanese market are not affected. |
| Network Scanner Tool and Network Scanner Tool Lite provided by Sharp Corporation, with the initial configuration, require no authentication and accept files unlimitedly. When the affected products are used with the initial configuration, anyone can connect to them without authentication and upload files unlimitedly. This may cause a denial-of-service (DoS) condition on the PC. Furthermore, if a malicious file is uploaded, a PC user may be tricked to execute the file to attack other entities from that PC. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_ioctl() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| Deployment of the VPS.org one-click Zulip template deploys a hardcoded application signing key, a default database password ("zulip"), and DISABLE_HTTPS=True. |
| A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: regenerate buddy after block freeing failed if under fc replay
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm btree remove: assign new_root only when removal succeeds
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
The debugging code for kmap_local() doubles the number of per-CPU fixmap
slots allocated for kmap_local(), in order to use half of them as guard
regions. This causes the fixmap region to grow downwards beyond the start
of its reserved window if the supported number of CPUs is large, and collide
with the newly added virtual DT mapping right below it, which is obviously
not good.
One manifestation of this is EFI boot on a kernel built with NR_CPUS=32
and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting
in block entries below the fixmap region that the fixmap code misidentifies
as fixmap table entries, and subsequently tries to dereference using a
phys-to-virt translation that is only valid for lowmem. This results in a
cryptic splat such as the one below.
ftrace: allocating 45548 entries in 89 pages
8<--- cut here ---
Unable to handle kernel paging request at virtual address fc6006f0
pgd = (ptrval)
[fc6006f0] *pgd=80000040207003, *pmd=00000000
Internal error: Oops: a06 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382
Hardware name: Generic DT based system
PC is at cpu_ca15_set_pte_ext+0x24/0x30
LR is at __set_fixmap+0xe4/0x118
pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3
sp : c1601ed8 ip : 00400000 fp : 00800000
r10: 0000071f r9 : 00421000 r8 : 00c00000
r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f
r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 30c5387d Table: 40203000 DAC: 00000001
Process swapper (pid: 0, stack limit = 0x(ptrval))
So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also,
fix the BUILD_BUG_ON() check that was supposed to catch this, by checking
whether the region grows below the start address rather than above the end
address. |
| Action Pack is a framework for handling and responding to web requests. In versions prior to 7.2.3.2, 8.0.5.1 and 8.1.3.1, Active Storage does not disable libvips operations marked unsafe for untrusted content, allowing a crafted upload to invoke such an operation. Consuming applications are affected when configured to use libvips and accept image uploads from untrusted users. An unauthenticated attacker may exploit this behavior to read arbitrary files accessible to the Rails process, including environment variables and application secrets. Exposure of credentials such as secret_key_base or external-service tokens may enable remote code execution or lateral movement. This issue has been fixed in versions 7.2.3.2, 8.0.5.1 and 8.1.3.1. |
| Deployment of the VPS.org one-click Supabase template deploys a PostgreSQL instance that is published on all interfaces (0.0.0.0:5432) with a default database password set to "postgres". Because Docker installs its own iptables rules, this exposure bypasses a standard host UFW configuration. |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base system (All versions < V26.20.0). The affected application ships with a default configuration that disables all OPC UA security mechanisms. This could allow an attacker to gain unauthorized access and control over critical system functions. |
| Juggle through 1.6.0 contains a remote code execution vulnerability that allows unauthenticated remote attackers to execute arbitrary OS commands by connecting to the exposed H2 database web console using default shipped credentials. Attackers can access the unprotected /h2-console endpoint, authenticate with default credentials, and leverage the H2 CREATE ALIAS Runtime.exec() technique to execute arbitrary commands, resulting in root-level code execution when running the stock Docker image. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix the smbd_response slab to allow usercopy
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space. |
| Improper exposure of the MCP server in alibabacloud-rds-openapi-mcp-server allows remote attackers to invoke exposed MCP tools via network access to an MCP endpoint listening on all network interfaces by default. |
| Joomla Extension - joomdle.com - Insecure default configuration allows read/write user account access in Joomdle < 3.1.1 - The default configuration of the extension allowed read access and password reset of CMS accounts. |
| Vvveb before version 1.0.8.2 contains an information disclosure vulnerability that allows unauthenticated attackers to obtain sensitive server information by triggering unhandled exceptions in the password-reset module. Attackers can access the admin password-reset endpoint to trigger a fatal error caused by a missing namespace import, which exposes the absolute server file path, internal class namespaces, line numbers, and source code excerpts through the debug exception handler rendered to unauthenticated requests. |
