| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in GearUP Hyperev up to 20261020. This affects an unknown function. Such manipulation leads to on-chip debug and test interface with improper access control. The attack can be executed directly on the physical device. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in DrayTek Vigor2960 up to 1.5.1.6. This vulnerability affects the function doWebBackup of the file /cgi-bin/mainfunction.cgi of the component Backup Handler. Such manipulation of the argument path/value leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.7 is able to resolve this issue. The affected component should be upgraded. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A weakness has been identified in DrayTek Vigor2960 up to 1.5.1.6. Affected is the function setSWMProfile of the file /cgi-bin/mainfunction.cgi. Executing a manipulation of the argument filename can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.5.1.7 is able to address this issue. It is recommended to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A vulnerability was detected in DrayTek Vigor2960 up to 1.5.1.6. Affected by this issue is the function json_load_lock of the file /cgi-bin/mainfunction.cgi of the component Jsonstatus. The manipulation of the argument usefile results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 1.5.1.7 can resolve this issue. It is advisable to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A flaw has been found in DrayTek Vigor2960 up to 1.5.1.6. This affects the function dataflowstatus of the file /cgi-bin/mainfunction.cgi of the component CGI Process. This manipulation of the argument option causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. Upgrading to version 1.5.1.7 is able to mitigate this issue. You should upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| Jane is a set of PHP libraries that generates models and API clients from JSON Schema and OpenAPI specifications. Prior to 7.12.0, the Jane open-api-3 generator emits an OpenAPI parameter description verbatim in generated Client/Endpoint method docblocks. A parameter description containing a PHPDoc closing delimiter can terminate the comment early and place attacker-controlled PHP in class-body position, including an __construct method that runs when the generated Client is instantiated. Exploitation requires generating a client from an attacker-influenced OpenAPI document and then using the generated SDK, and can execute arbitrary PHP with the consuming application's privileges. This issue is fixed in version 7.12.0. |
| Jane is a set of PHP libraries that generates models and API clients from JSON Schema and OpenAPI specifications. Prior to 7.12.0, the Jane open-api-3 generator emits an OpenAPI query parameter name verbatim as an array key in generated Client/Endpoint method docblocks. A query parameter name containing a PHPDoc closing delimiter can terminate the comment early and place attacker-controlled PHP in class-body position, including an __construct method that runs when the generated Client is instantiated. Exploitation requires generating a client from an attacker-influenced OpenAPI document and then using the generated SDK, and can execute arbitrary PHP with the consuming application's privileges. This issue is fixed in version 7.12.0. |
| A kernel pool buffer overflow vulnerability in the
ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4
and Sound Blaster Audigy 5/Rx could allow a local
attacker with low privilege access to cause a denial of service. |
| Improper encoding or escaping of output vulnerability in the system plugin daemon in Synology BeeStation OS (BSM) before 1.1-65374 and Synology DiskStation Manager (DSM) before 7.2-64570-4, 7.2.1-69057-6 and 7.2.2-72806-1 allows remote attackers to execute arbitrary code via unspecified vectors. |
| CodeWhale is a DeepSeek and MiMo coding agent for the terminal. Prior to 0.9.0, DEFAULT_AUTOMATION_AUTO_APPROVE caused AutomationRecord::task_auto_approve to resolve an omitted setting to true, and the automation_create schema advertised the same insecure default. enqueue_run_task converted that omission into an explicit true value, bypassing the safer task-path fallback and selecting ApprovalMode::Bypass for each scheduled run. After a user approved creation of an apparently benign recurring automation, subsequent executions could silently authorize mutating tools without a human present, and an automation created with shell access could repeatedly execute commands. This issue is fixed in version 0.9.0. |
| The microcontroller lacks enabled debug lock bits, leaving the physical Single-Wire (SWS) debugging interface completely unrestricted. This allows an attacker with physical access to use a hardware programmer to dump the entire production firmware. |
| An unauthenticated buffer overflow vulnerability exists in the underlying operating system of AOS-10 or AOS-8 and could allow an unauthenticated adjacent attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to disrupt the availability of the affected system, with a limited impact to the integrity of the affected component. |
| Improper output encoding in Editing in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| AnsibleForms is a self-hosted web application that turns automation into self-service forms. Prior to 6.2.1, AnsibleForms uses a public hard-coded fallback JWT signing secret from server/config/auth.config.js when ACCESS_TOKEN_SECRET is unset. An unauthenticated attacker can sign a self-contained token with privileged claims because server/src/auth/auth_jwt.js verifies the signature without reloading the user from the database, and server/src/lib/middleware.js trusts the token's roles and options for authorization. A forged token can therefore be accepted as an administrator session, resulting in authentication bypass and full privileged API access. This issue is fixed in version 6.2.1. |
| Tapir is a Scala library for describing HTTP APIs and exposing, consuming, and documenting them using open standards. Prior to 1.13.27, tapir-openapi-codegen-core generates Scala source from untrusted OpenAPI documents by interpolating object property names, query, header, and path parameter names, and operation tags without context-appropriate validation or escaping. Crafted names or values can break out of generated identifier or string-literal contexts and inject arbitrary Scala that executes when generated code is compiled or endpoints are assembled. This is a code-generation and build-time issue and does not make a running tapir server directly exploitable. This issue is fixed in version 1.13.27. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component on Android. This vulnerability was fixed in Firefox 160.0.1. |
| Lucee Server versions 5.0.0.0 before 5.3.4.46 contain an insecure default configuration that allows unauthenticated attackers to set the initial admin password via the first-run form on /lucee/admin/web.cfm and /lucee/admin/server.cfm. Attackers can access the 'New Password' set-password form before any password is configured to seize administrative control of the server. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-24. |
| Cudy TR3000 before 2.5.42 contains a remote code execution vulnerability that allows authenticated administrators to execute commands as root by uploading crafted OpenVPN private or tls-auth keys. Attackers can close the inline key block with </key>, inject directives such as tls-verify that bypass the .ovpn denylist, and have OpenVPN execute the hook as root. |
| Latvijas Valsts radio un televīzijas centrs (LVRTC)
eParakstītājs 3.0 version 1.10.0 for macOS allows an unauthenticated remote
attacker to execute arbitrary commands with the privileges of the current user
by convincing the user to open a PDF with a crafted filename and select Send.
The application embeds the attachment path in AppleScript source without
neutralizing AppleScript syntax, allowing injected do shell script expressions
to execute. |
| A security vulnerability has been detected in TRENDnet TEW-657BRM 1.00.1. This vulnerability affects the function sprintf of the file /setup.cgi of the component mini_httpd. Such manipulation leads to out-of-bounds write. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know." This vulnerability only affects products that are no longer supported by the maintainer. |