| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the
URBs for USB-in transfers are allocated, added to the dev->rx_submitted
anchor and submitted. In the complete callback
kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
kvaser_usb_remove_interfaces() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: ensure safe queue release with state management
Directly calling `put_queue` carries risks since it cannot
guarantee that resources of `uacce_queue` have been fully released
beforehand. So adding a `stop_queue` operation for the
UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to
the final resource release ensures safety.
Queue states are defined as follows:
- UACCE_Q_ZOMBIE: Initial state
- UACCE_Q_INIT: After opening `uacce`
- UACCE_Q_STARTED: After `start` is issued via `ioctl`
When executing `poweroff -f` in virt while accelerator are still
working, `uacce_fops_release` and `uacce_remove` may execute
concurrently. This can cause `uacce_put_queue` within
`uacce_fops_release` to access a NULL `ops` pointer. Therefore, add
state checks to prevent accessing freed pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: avoid possible NULL deref
tcf_ife_encode() must make sure ife_encode() does not return NULL.
syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166
CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full)
Call Trace:
<TASK>
ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101
tcf_ife_encode net/sched/act_ife.c:841 [inline]
tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877
tc_act include/net/tc_wrapper.h:130 [inline]
tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152
tcf_exts_exec include/net/pkt_cls.h:349 [inline]
mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:197 [inline]
__tcf_classify net/sched/cls_api.c:1764 [inline]
tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860
multiq_classify net/sched/sch_multiq.c:39 [inline]
multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66
dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147
__dev_xmit_skb net/core/dev.c:4262 [inline]
__dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd: Fix memory leak in wbrf_record()
The tmp buffer is allocated using kcalloc() but is not freed if
acpi_evaluate_dsm() fails. This causes a memory leak in the error path.
Fix this by explicitly freeing the tmp buffer in the error handling
path of acpi_evaluate_dsm(). |
| The CTFer.io Monitoring component is in charge of the collection, process and storage of various signals (i.e. logs, metrics and distributed traces). Prior to 0.2.1, due to a mis-written NetworkPolicy, a malicious actor can pivot from a component to any other namespace. This breaks the security-by-default property expected as part of the deployment program, leading to a potential lateral movement. This vulnerability is fixed in 0.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix recvmsg() unconditional requeue
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
__arm_lpae_unmap() returns size_t but was returning -ENOENT (negative
error code) when encountering an unmapped PTE. Since size_t is unsigned,
-ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE
on 64-bit systems).
This corrupted value propagates through the call chain:
__arm_lpae_unmap() returns -ENOENT as size_t
-> arm_lpae_unmap_pages() returns it
-> __iommu_unmap() adds it to iova address
-> iommu_pgsize() triggers BUG_ON due to corrupted iova
This can cause IOVA address overflow in __iommu_unmap() loop and
trigger BUG_ON in iommu_pgsize() from invalid address alignment.
Fix by returning 0 instead of -ENOENT. The WARN_ON already signals
the error condition, and returning 0 (meaning "nothing unmapped")
is the correct semantic for size_t return type. This matches the
behavior of other io-pgtable implementations (io-pgtable-arm-v7s,
io-pgtable-dart) which return 0 on error conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-sprd-adi: Fix double free in probe error path
The driver currently uses spi_alloc_host() to allocate the controller
but registers it using devm_spi_register_controller().
If devm_register_restart_handler() fails, the code jumps to the
put_ctlr label and calls spi_controller_put(). However, since the
controller was registered via a devm function, the device core will
automatically call spi_controller_put() again when the probe fails.
This results in a double-free of the spi_controller structure.
Fix this by switching to devm_spi_alloc_host() and removing the
manual spi_controller_put() call. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
The credit calculation in virtio_transport_get_credit() uses unsigned
arithmetic:
ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes
are in flight, the subtraction can underflow and produce a large
positive value, potentially allowing more data to be queued than the
peer can handle.
Reuse virtio_transport_has_space() which already handles this case and
add a comment to make it clear why we are doing that.
[Stefano: use virtio_transport_has_space() instead of duplicating the code]
[Stefano: tweak the commit message] |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. In 1.11.1 and earlier, The ImportedPlugin.importCommunityItemFromUrl() function in server/utils/agents/imported.js downloads a ZIP file from a community hub URL and extracts it using AdmZip.extractAllTo() without validating file paths within the archive. This enables a Zip Slip path traversal attack that can lead to arbitrary code execution. |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. In 1.11.1 and earlier, in multi-user mode, AnythingLLM blocks suspended users on the normal JWT-backed session path, but it does not block them on the browser extension API key path. If a user already has a valid brx-... browser extension API key, that key continues to work after suspension. As a result, a suspended user can still access browser extension endpoints, read reachable workspace metadata, and continue upload or embed operations even though normal authenticated requests are rejected. |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. In 1.11.1 and earlier, The two generic system-preferences endpoints allow manager role access, while every other surface that touches the same settings is restricted to admin only. Because of this inconsistency, a manager can call the generic endpoints directly to read plaintext SQL database credentials and overwrite admin-only global settings such as the default system prompt and the Community Hub API key. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, A logic error in the PX4 Autopilot MAVLink FTP session validation uses incorrect boolean logic (&& instead of ||), allowing BurstReadFile and WriteFile operations to proceed with invalid sessions or closed file descriptors. This enables an unauthenticated attacker to put the FTP subsystem into an inconsistent state, trigger operations on invalid file descriptors, and bypass session isolation checks. This vulnerability is fixed in 1.17.0-rc2. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, An unauthenticated path traversal vulnerability in the PX4 Autopilot MAVLink FTP implementation allows any MAVLink peer to read, write, create, delete, and rename arbitrary files on the flight controller filesystem without authentication. On NuttX targets, the FTP root directory is an empty string, meaning attacker-supplied paths are passed directly to filesystem syscalls with no prefix or sanitization for read operations. On POSIX targets (Linux companion computers, SITL), the write-path validation function unconditionally returns true, providing no protection. A TOCTOU race condition in the write validation on NuttX further allows bypassing the only existing guard. This vulnerability is fixed in 1.17.0-rc2. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, the Zenoh uORB subscriber allocates a stack VLA directly from the incoming payload length without bounds. A remote Zenoh publisher can send an oversized fragmented message to force an unbounded stack allocation and copy, causing a stack overflow and crash of the Zenoh bridge task. This vulnerability is fixed in 1.17.0-rc2. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, tattu_can contains an unbounded memcpy in its multi-frame assembly loop, allowing stack memory overwrite when crafted CAN frames are processed. In deployments where tattu_can is enabled and running, a CAN-injection-capable attacker can trigger a crash (DoS) and memory corruption. This vulnerability is fixed in 1.17.0-rc2. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, The crsf_rc parser accepts an oversized variable-length known packet and copies it into a fixed 64-byte global buffer without a bounds check. In deployments where crsf_rc is enabled on a CRSF serial port, an adjacent/raw-serial attacker can trigger memory corruption and crash PX4. This vulnerability is fixed in 1.17.0-rc2. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, the BST telemetry probe writes a string terminator using a device-provided length without bounds. A malicious BST device can report an oversized dev_name_len, causing a stack overflow in the driver and crashing the task (or enabling code execution). This vulnerability is fixed in 1.17.0-rc2. |
