| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ouroboros is a local-first runtime for AI coding agents that records their actions and applies user-defined policies to constrain behavior. In versions prior to 0.39.0, if a user clones a malicious repository and runs Ouroboros commands within that directory, it can lead to arbitrary code execution and potential system takeover. The vulnerability stems from Ouroboros loading the .env file from the current working directory. Execution-affecting environment variables such as OUROBOROS_CLI_PATH, OPENCODE_CLI_PATH, and other backend selectors are accepted directly from this local .env. An attacker can include a malicious script in the repository and point the CLI path variable to it (e.g., OUROBOROS_CLI_PATH=./malicious_script.sh). When the user executes a command like ouroboros init or any command that instantiates the adapter, the malicious script is executed instead of the intended CLI. This issue has been fixed in version 0.39.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: set mem->altmap after successful device registration
If __add_memory_block() fails at xa_store() (under memory pressure for
example), device_unregister() is called, which eventually triggers
memory_block_release() with mem->altmap still set, causing a
WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver.
Fix this by delaying the assignment of mem->altmap until after
__add_memory_block() has succeeded. |
| A vulnerability was identified in danpros HTMLy up to 3.1.1. Affected by this issue is the function unlink of the file /system/htmly.php of the component Delete Username Endpoint. Such manipulation of the argument File leads to path traversal. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Authorization handling for Parameter Context validation requests in Apache NiFi 1.10.0 through 2.10.0 allows clients with read access to submit proposed Parameter values. The proposed values override current configuration, enabling users with read access to invoke predefined component validation methods with alternative settings. Apache NiFi installations that do not implement different levels of authorization for viewing and modifying Parameter Context configuration are not subject to this vulnerability. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, requiring write access to submit Parameter Context validation requests. |
| The DuckDB AWS extension for DuckDB contains a security policy bypass vulnerability that allows any database user with SQL execution permissions to extract plaintext AWS credentials by calling the load_aws_credentials function with the redact_secret parameter set to false, circumventing the database-wide allow_unredacted_secrets=false policy. Attackers can invoke this single function to retrieve the underlying AWS credential chain including access_key_id, secret_access_key, session_token, and region in plaintext, which are immediately valid against AWS APIs and particularly impactful in managed environments where pg_duckdb is preloaded and an AWS credential chain such as IMDSv2, IRSA, ECS task role, or EC2 instance role is reachable. |
| A vulnerability was determined in Sangfor Operation and Maintenance Security Management System up to 3.0.13. Affected by this vulnerability is the function com.sbr.fort.foreignDP.DpLoginController of the file /fort/portal_login of the component Login Endpoint. This manipulation causes os command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| Redis before 8.8.0, in the unusual case where an authenticated attacker can execute RESTORE, allows remote code execution via a RESTORE payload where the same NACK (pending entry) is referenced by more than one consumer, because deleting both consumers via XGROUP DELCONSUMER leads to a double free. NOTE: this issue exists because of an incomplete fix for CVE-2026-25243. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: make a fuse_req on SQE commit only findable after memcpy
Bad userspace might try to trick us and send commit SQEs request
unique / commit-id of requests that are not even send to
fuse-server (io_uring_cmd_done() not called) yet.
fuse_uring_commit_fetch() ends the fuse request when the ring entry
has a wrong state, but that could have caused a use-after-free
with the memcpy operations in fuse_uring_send_in_task().
In order to avoid such races the call of fuse_uring_add_to_pq()
is moved after the copy operations and just before completing
the io-uring request - malicious userspace cannot find the request
anymore until all prepration work in fuse-client/kernel is completed.
This also moves fuse_uring_add_to_pq() a bit up in the code to
avoid a forward declaration. Also not with a preparation commit,
to make it easier to back port to older kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - prevent division by zero and arithmetic underflow
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device. |
| A flaw has been found in GL-iNet GL-MT3000 up to 4.4.5. This vulnerability affects the function plugins.remove_package/plugins.install_package of the file /cgi-bin/glc of the component plugins.so Native Plugin. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| A vulnerability has been found in GL-iNet GL-MT3000 up to 4.4.5. This issue affects the function plugins.set_config of the file /cgi-bin/glc of the component plugins.so Native Plugin. Such manipulation leads to injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| Key exchange without entity authentication in the EMR SSH helper commands in Amazon AWS CLI before 1.45.28 and AWS CLI v2 before 2.35.3 might allow man-in-the-middle attackers to intercept SSHsessions and file transfers via network positioning between the client and the EMR cluster endpoint.
To remediate this issue, users should upgrade to AWS CLI v1 1.45.28 or later, or AWS CLI v2 2.35.3 or later. |
| osTicket 1.18.3 generates API keys using a predictable construction based on MD5 hashing. The use of MD5, combined with predictable inputs such as the current timestamp and client IP address, significantly reduces entropy. An attacker can approximate the key generation time and brute-force the key space within a feasible time window. |
| osTicket v1.18.3 is vulnerable to Stored Cross-Site Scripting (XSS) via the email From-header display name. The value is extracted without sanitization in include/class.mailparse.php and stored raw in the poster field of ost_thread_entry. When an unauthenticated attacker sends a reply email to an existing ticket from an unregistered address with an XSS payload in the From display name. |
| A security flaw has been discovered in langgenius dify up to 1.14.2. This issue affects the function jinja2.Template of the file api/core/helper/code_executor/jinja2/jinja2_transformer.py of the component Jinja2 Handler. The manipulation results in improper neutralization of special elements used in a template engine. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exits
Move the handling of fastpath userspace exits into vendor code to ensure
KVM runs vendor specific operations that need to run before userspace gains
control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM
needs to flush the PML buffer prior to exiting to userspace, otherwise any
memory written by the final KVM_RUN might never be flagged as dirty.
Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in
general, as that risks consuming stale state in a fastpath handler. That
will be addressed in a future change. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Break the loop on failure in iommufd_fault_fops_read()
On a copy_to_user() failure inside the inner list_for_each_entry, only the
inner loop breaks; the outer while re-fetches the just-restored fault group
and retries the failing copy_to_user() forever, spinning the reader at 100%
CPU with fault->mutex held.
Check rc after the inner loop and break the outer while as well. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
