| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An information disclosure vulnerability in the opcua-configuration method of /cgi-bin/wwwugw.cgi in MBS-Solutions X-Serie Gateway firmware V6_00_05 allows any remote authenticated user, including users with the low-privileged Standard role, to retrieve the configured OPC-UA authentication credentials in cleartext via the JSON API response. |
| PowerJob versions 4.x through 5.1.2 contain an unauthenticated remote code execution vulnerability in the /friend/process endpoint of the Server-Worker transport layer |
| An issue in the ugw-restart method of /cgi-bin/wwwugw.cgi in MBS-Solutions X-Serie Gateway firmware V6_00_05 allows a remote authenticated user with the low-privileged Standard role to inject arbitrary code into the dpcheck system utility executed as root. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| An issue in X-Serie Gateway Firmware V6_00_05 allows a remote attacker to escalate privileges via the endpoints /cgi-bin/wwwugw.cgi and /cgi-bin/ugwdownload.cgi. |
| Cross-Site Request Forgery (CSRF) in the OrderConfirmController at GET /order/confirm/{order_number} in Roskus Prospero Flow CRM before 5.15.11 allows an unauthenticated attacker to confirm any order on behalf of an authenticated user by directing them to a crafted page. Laravel's VerifyCsrfToken middleware enforces CSRF tokens only on POST, PUT, PATCH, and DELETE requests; the Route::get declaration leaves this state-changing action unprotected. Session cookies configured with SameSite=Lax are automatically included in top-level cross-site navigation, so a single link click triggers OrderConfirmController::confirm() and transitions the target order from pending to confirmed without user authorization. Because order numbers are sequential integers, an attacker can enumerate and confirm all existing orders in a single automated sweep. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a
permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to
fsctl_set_sparse and noted that "similar handle-level checks exist in other
functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of
the missing ones, and the most security-relevant: smb2_set_info_sec() calls
set_info_sec() with no per-handle access check.
set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it
rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via
set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and
rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr().
Every other persistent-mutation arm of the sibling handler
smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA /
FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm —
which mutates the access control itself — is the only one with no gate.
A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no
FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType
SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself
access the handle's daccess never carried. Unlike the FSCTL data arms this
is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop —
the missing fp->daccess check is the entire gate.
Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so
require at least one of those on the handle before re-permissioning the
file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info(). |
| Voltronic Power SNMP Web Pro 1.1 contains an unauthenticated remote code execution vulnerability in the upload.cgi firmware update endpoint that allows remote attackers to execute arbitrary commands as root by uploading a crafted tar archive without valid credentials. Attackers can supply a malicious tar archive containing arbitrary executable files that are extracted to a privileged directory and executed as root, achieving full system compromise. |
| In Trimble TM4WEB 21.4.0.4, the external bill viewer endpoint is vulnerable to reflected cross-site scripting via injection in a arbitrary parameter appended to the URL. |
| IBM Langflow OSS 1.0.0 through 1.11.2 could allow a remote authenticated attacker to obtain sensitive information from internal services due to a URL parser discrepancy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths. |
| firecrawl-mcp-server 3.20.2 contains an arbitrary local file read vulnerability in the firecrawl_parse tool that accepts unconstrained filePath arguments without directory containment validation. Attackers can supply absolute paths or directory traversal sequences to read sensitive files like credentials and environment variables, which are then uploaded and returned to the model context. |
| AppFlowy-Cloud 0.9.64 fails to verify that requested collab objects belong to the workspace in authorization checks, allowing attackers to access documents and database rows across workspaces. Attackers can supply a victim's object ID with their own workspace ID to bypass access controls and read, modify, or delete cross-workspace data. |
| Postgres MCP Pro 0.3.0 contains a restricted-mode bypass vulnerability where function-name validation is not applied to RangeFunction nodes in FROM clauses. Attackers can execute file-reading functions like pg_read_file through FROM-clause syntax to read arbitrary files despite restricted-mode protections. |
| No description is available for this CVE. |
| It’s possible to run a stored XSS in Stormshield’s web administration panel.
To exploit this vulnerability, a SNS administrator with appropriate permissions must inject some malicious script in a group’s comments in the webservices administration interface. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
Add a check to see if devm_kasprintf() is not NULL in
mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function
failed. |
